hit counter script
Toro 29732 Operator's Manual
  1. Manuals
  2. Brands
  3. Toro Manuals
  4. Lawn Mower
  5. 29732
  6. Operator's manual

Toro 29732 Operator's Manual

53cm mulching/rear bagging/side discharging lawn mower
Hide thumbs Also See for 29732:
Table of Contents

Advertisement

Quick Links

Download this manual
53cm Mulching/Rear Bagging/Side Discharging
Lawn Mower
Model No. 29732-Serial No. 402100000 and Up
Model No. 29734-Serial No. 402100000 and Up

Introduction

This rotary-blade, walk-behind lawn mower is intended
to be used by residential homeowners. It is designed
primarily for cutting grass on well-maintained lawns
on residential properties. It is not designed for cutting
brush or for agricultural uses.
Read this information carefully to learn how to operate
and maintain your product properly and to avoid
injury and product damage. You are responsible for
operating the product properly and safely.
You may contact Toro directly at www.Toro.com for
product and accessory information, help finding a
dealer, or to register your product.
Whenever you need service, genuine Toro parts, or
additional information, contact an Authorized Service
Dealer or Toro Customer Service and have the model
and serial numbers of your product ready.
identifies the location of the model and serial numbers
on the product. Write the numbers in the space
provided.
Important:
With your smartphone or tablet, scan
the QR code on the serial number decal to access
warranty, parts, and other product information.
1. Model and serial number location
Model No.
Serial No.
This manual identifies potential hazards and has
safety messages identified by the safety-alert symbol
(Figure
2), which signals a hazard that may cause
serious injury or death if you do not follow the
recommended precautions.
© 2019-The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Figure 1
Figure 1
Register at www.Toro.com.
This manual uses 2 words to highlight information.
Important calls attention to special mechanical
information and Note emphasizes general information
worthy of special attention.
This product complies with all relevant European
directives; for details, please see the separate product
specific Declaration of Conformity (DOC) sheet.
Gross or Net Torque: The gross or net torque
of this engine was laboratory rated by the engine
manufacturer in accordance with the Society of
Automotive Engineers (SAE) J1940 or J2723. As
configured to meet safety, emission, and operating
requirements, the actual engine torque on this class
of mower will be significantly lower. Please refer to
the engine manufacturer's information included with
the machine.
Do not tamper with or disable safety devices on the
machine, and check their proper operation regularly.
Do not attempt to adjust or tamper with the engine
speed control; doing so may create an unsafe
operating condition, resulting in personal injury.
Contents
g226626
Introduction ............................................................... 1
Safety ....................................................................... 2
General Safety ................................................... 2
Safety and Instructional Decals .......................... 3
Setup ........................................................................ 4
1 Unfolding the Handle ....................................... 4
Rope Guide..................................................... 5
3 Filling the Engine with Oil ................................. 5
4 Charging the Battery ........................................ 6
5 Assembling the Grass Bag............................... 6
Product Overview ..................................................... 7
Specifications .................................................... 8
Original Instructions (EN)
Form No. 3419-251 Rev C
Operator's Manual
Figure 2
Safety-alert symbol
All Rights Reserved *3419-251* C
Printed in Mexico
g000502

Advertisement

Table of Contents
loading

Related Manuals for Toro 29732

Summary of Contents for Toro 29732

  • Page 1: Table Of Contents

    Authorized Service manufacturer in accordance with the Society of Dealer or Toro Customer Service and have the model Automotive Engineers (SAE) J1940 or J2723. As and serial numbers of your product ready.

  • Page 2: Safety

    Safety Operation ..............8 Before Operation ........... 8 Before Operation Safety ........8 This machine has been designed in accordance with Filling the Fuel Tank ..........9 EN ISO 5395:2013. Checking the Engine-Oil Level......9 Adjusting the Cutting Height ......10 During Operation ..........

  • Page 3: Safety And Instructional Decals

    Safety and Instructional Decals Safety decals and instructions are easily visible to the operator and are located near any area of potential danger. Replace any decal that is damaged or missing. decal104-7953 104-7953 Electric-Start Model Only 1. Warning—read the Operator's Manual for information on charging the battery; contains lead; do not discard. 2.

  • Page 4: Setup

    Setup Move the handle to the operating position (Figure Important: Remove and discard the protective plastic sheet that covers the engine and any other plastic or wrapping on the machine. Important: To prevent accidental starting, do not insert the key into the electric-start ignition (if equipped) until you are ready to start the engine.

  • Page 5: Installing The Recoil-Starter Rope In The Rope Guide

    Install the handle knobs and tighten them firmly by hand. Filling the Engine with Oil No Parts Required Installing the Recoil-Starter Rope in the Rope Guide Procedure Important: Your machine does not come with oil in the engine. Before starting the engine, fill the No Parts Required engine with oil.

  • Page 6: Charging The Battery

    Read the oil level on the dipstick (Figure • If the oil level on the dipstick is too low, carefully pour a small amount of oil into the oil-fill tube, wait 3 minutes, and repeat steps Assembling the Grass Bag through until the oil on the dipstick is at the correct level.

  • Page 7: Product Overview

    Product Overview g197495 Figure 10 Electric-start model shown g027544 Figure 9 1. Blade-control bar 8. Oil fill/ dipstick 2. Ignition key (electric-start 9. Rear deflector Hook the top and side channels of the bag onto model only) the top and sides of the frame, respectively 10.

  • Page 8: Specifications

    Height the operation of the machine or that the machine 34 kg 140 cm 56 cm 102 cm could throw. 29732 (76 lb) • Adjusting the cutting height may bring you into inches) inches) inches) contact with the moving blade, causing serious...

  • Page 9: Filling The Fuel Tank

    Checking the Engine-Oil – Store fuel in an approved container and keep it out of the reach of children. Level • Fuel is harmful or fatal if swallowed. Long-term exposure to vapors can cause serious injury and Service Interval: Before each use or daily illness.

  • Page 10: Adjusting The Cutting Height

    • Use accessories and attachments approved by • Wear appropriate clothing, including eye The Toro® Company only. protection; long pants; slip-resistant, substantial footwear; and hearing protection. Tie back long Slope Safety hair, secure loose clothing, and do not wear loose jewelry.

  • Page 11: Starting The Engine

    Starting the Engine Using the Self-propel Drive Pull the blade-control bar (Figure 15) to the Self-Propel Model Only handle and hold it. To operate the self-propel drive, squeeze the self-propel-drive bar (Figure 18) to the handle and hold it. g014712 Figure 15 1.

  • Page 12: Shutting Off The Engine

    Shutting Off the Engine Bagging the Clippings Use the grass bag when you want to collect grass and Service Interval: Before each use or daily leaf clippings from the lawn. To shut off the engine, release the blade-control bar (Figure 19).

  • Page 13: Side-Discharging The Clippings

    • For best performance, install a new blade before the cutting season begins. • Replace the blade when necessary with a Toro replacement blade. Cutting Grass • Cut only about a third of the grass blade at a time.

  • Page 14: After Operation

    Folding the Handle • If there are more than 13 cm (5 inches) of leaves on the lawn, mow at a higher cutting height and then again at the desired cutting height. WARNING • Slow down your mowing speed if the machine does not cut the leaves finely enough.

  • Page 15: Maintenance

    • To ensure optimum performance and continued safety certification of the machine, use only 1. Spark-plug wire genuine Toro replacement parts and accessories. Replacement parts and accessories made by After performing the maintenance procedure(s), other manufacturers could be dangerous, and connect the spark-plug wire to the spark plug.

  • Page 16: Servicing The Air Filter

    Servicing the Air Filter Changing the Engine Oil Service Interval: Every 25 hours/Yearly (whichever Service Interval: Yearly comes first) Changing the engine oil is not required, but if Pull the tab to open the air-filter cover (Figure you want to change the oil, use the following 25).

  • Page 17: Charging The Battery

    Charging the Battery Electric-Start Model Only Service Interval: Every 25 hours Charge the battery for 24 hours initially, then monthly (every 25 starts) or as needed. Always use the charger in a sheltered area and charge the battery at room temperature (22°C or 70°F) whenever possible. Connect the charger to the wire harness located g020050 below the ignition key...

  • Page 18: Replacing The Fuse

    Replacing the Fuse Replacing the Blade Electric-Start Model Only Service Interval: Yearly Important: You will need a torque wrench to If the battery does not charge or the engine does not install the blade properly. If you do not have a run with the electric starter, the fuse may be blown.

  • Page 19: Adjusting The Self-Propel Drive

    Adjusting the Self-Propel Drive Whenever you install a new self-propel cable or if the self-propel drive is out of adjustment, adjust the self-propel drive cable. Loosen the cable-support nut (Figure 33). g231390 Figure 32 g009692 Figure 33 1. 25 to 38 mm (1 to 1-1/2 4.

  • Page 20: Storage

    Remove the spark plug and spin the engine On the last refueling of the year, add fuel rapidly by pulling the recoil-start handle to blow stabilizer (such as Toro Premium Fuel the excess oil from the cylinder. Treatment) to the fuel as directed on the label.
  • Page 21 Notes:...
  • Page 22 Notes:...
  • Page 23 Notes:...
  • Page 24 The Way Toro Uses Information Toro may use your personal information to process warranty claims, to contact you in the event of a product recall and for any other purpose which we tell you about. Toro may share your information with Toro's affiliates, dealers or other business partners in connection with any of these activities. We will not sell your personal information to any other company.

This manual is also suitable for:

29734

Table of Contents