STEP 3
If you subscribe to Caller ID from your local telphone company, complete the steps below. If
you do not subscribe to Caller ID, skip this section. To call back from the Call Log, you must
enter and store the Local Area Code for the area where your phone is installed. If your
phone is installed in an area with multiple area codes, you will also have to enter and store
the Extra Codes for that area.
Storing Local Area Code
1
Open the Menu.
2
Scroll to ”Base Settings” and
press OK.
3
Scroll to ”Area Codes” and
press OK.
4
Scroll to ”Local Area Code” and
press OK.
5
Enter your area code and press OK.
VOICE-OPERATED CONTROLS
Siemen’s GigaVoice™ voice-operated controls for the SL30 series allow users to place calls
or hear who’s calling. The system recognizes up to 20 names and numbers from the
directory and up to four users may record the same name or number. Subscription to Caller
ID from your local telephone company is required.
Recording a Voice Entry
1
Open the Directory by pressing
Navi key on bottom
2
Press Speech.
3
Select user 1-4 and press OK.
4
Scroll to ”New Entry” and
press OK.
5
Enter the telephone number.
6
Scroll to the name field and
enter the name.
7
Press Record.
8
Press Begin to start recording
and speak the name of the
desired entry (for example
“Anne”) to record a voice
pattern.
9
Repeat the name.
10
Press Save.
Customer Care: 1-888-777-0211 or visit our Website: www.my-siemens.com
Visite nuestro sitio Web para obtener instrucciones en español.
Area Codes
.
D
Storing Extra Area Codes
1
Repeat steps 1 through 3 at left.
2
Scroll to ”Extra Codes” and press OK.
3
To enter an extra area code, press
Menu.
4
Enter an extra area code and press OK.
(Repeat steps 3 and 4 to enter addi-
tional area codes.)
Dialing With Your Voice
1
Press Navi key on top
2
At the prompt, speak the recorded
voice pattern (for example “Anne”).
3
When the voice pattern is recog-
nized, the name is played back from
the handset and the number is
dialed.
Voice-Announced Caller ID
The voice pattern is played for incoming calls if
you have recorded the number as a voice entry.
1
Press Menu.
2
Scroll to ”Base Settings” and press
OK.
3
Scroll to ”Spec. Functions” and
press OK.
4
Scroll to ”Caller ID” and press OK
(check mark indicates feature is on).
.
E