Looking Up Fru Information - Lenovo ThinkPad P15 Gen 1 Hardware Maintenance Manual
Hide thumbs
Also See for ThinkPad P15 Gen 1:
- Hardware maintenance manual (147 pages) ,
- User manual (104 pages) ,
- Setup manual (10 pages)
Table of Contents
Advertisement
No.
Connector/feature
10
Solid-state drive slot (internal)
11
Solid-state drive slot (internal)
12
Memory module slot (internal)
13
GPU board slot(internal)
14
Smart-card connector (internal)
15
Battery connector (internal)
16
GPU board connector (internal)
17
I/O board connector (internal)
18
WLAN connector (internal)
19
Camera cable connector (internal)
20
Keyboard connectors (internal)
21
22
Fingerprint reader connector
(internal)
23
Memory module slot (internal)
24
WWAN connector (internal)
25
LCD connector (internal)
26
Speaker assembly connector
(internal)
27
Nano-SIM-card slot (external)
28
5G antenna connector(internal)
Looking up FRU information
For detailed FRU information, including part numbers, descriptions, and substitution part numbers, go to:
https://support.lenovo.com/partslookup
60
ThinkPad P15 Gen 1/T15g Gen 1 Hardware Maintenance Manual
Internal cable required
No
No
No
No
Smart card cable
No
GPU board cable
I/O board cable
No
Camera cable assembly
Keyboard assembly with
cable
Fingerprint reader cable
No
No
LCD cable
Speaker assembly cable
No
5G antenna cable
Cable connection
Insert the solid-state drive into this slot.
Insert the solid-state drive into this slot.
Insert the memory module into this slot.
Insert the GPU board into this slot.
Connect one end to the smart card reader
and the other end to this connector.
The battery comes with cable. Connect the
cable to this connector.
Connect one end to the GPU board and the
other end to this connector.
Connect one end to the I/O board and the
other end to this connector.
Insert the wireless-LAN card into this slot.
The camera cable assembly has two ends.
Connect the camera end to the camera card
and the MB end to this connector.
The keyboard assembly comes with the
cables. Connect the cables to these
connectors.
Connect one end to the fingerprint reader
card and the other end to this connector.
Insert the memory module into this slot.
Insert the wireless-WAN card into this slot.
Connect one end of the LCD cable to the
LCD panel and the other end to this
connector.
The speaker assembly comes with cable.
Connect the cable to this connector.
If the computer supports wireless WAN,
insert a nano-SIM card into this slot to
establish wireless-WAN connection.
If the computer supports 5G, connect one
end of the 5G antenna and the other end to
this connector.
- Quick Links:
- 1020 M.2 Solid-Stat Drive
Hide quick links:
Advertisement
Table of Contents
