Off-Premise Extensions / On-Premise Slt Extensions; Flash On Intercom Call Locks Up Keyset; Paging; Cannot Pick Up Call Coverage And Call Queue Key Calls Ringing External Page - NEC DS1000 Release Notes

Hide thumbs Also See for DS1000:

Table of Contents

DS1000 02.10.12 Release Notes

Software Corrections in 02.10.12

Off-Premise Extensions / On-Premise SLT Extensions

Update Utility Version 02.01.02

Default Only Installation Path

60 N 02.10.12

Software version 02.10.12 corrects a problem in prior versions in which a single line set on an

Intercom call with a keyset was permitted to hookﬂash and dial #3 (which is the trunk ﬂash code).

This put the keyset in an improper Hold state. To clear the problem, the keyset user had to hang up

and attempt a new call.

An extension user can dial the Universal Night Answer code ( ICM + *0 ) to pick up any type of call

ringing the External Paging system. In prior software versions, this code would not pick up:

Ringing Call Coverage key calls.

Ringing Group Call Pickup key calls.

Calls ringing the operator's Call Queue key.

External Paging (with relay control) will no longer cause the system to intermittently reset when

zones 1 or 2 are paged.

Software version 02.10.12 corrects out of range data entry problems that could occur with 0201-

DOOR1 Relay Page Zone Assignment and 0201-DOOR 2 Relay Page Zone Assignment.The

programming was still functional, however, and would respond to the correct entries.

The Update Utility will automatically install in the directory C:\NEC\DS-Series\Update Utility.

This assignment cannot be changed.

DS1000 Release Notes

Table of Contents