hit counter script
Samsung 153V User Manual
Hide thumbs Also See for 153V:

Advertisement

Driver Installation
Program Installation
SyncMaster 710V/910V/510M/710M/910M/712V

Advertisement

Table of Contents
loading

Summary of Contents for Samsung 153V

  • Page 1 Driver Installation Program Installation SyncMaster 710V/910V/510M/710M/910M/712V...
  • Page 2 Failure to follow directions noted by this symbol could result in bodily harm or damage to equipment. Prohibited Do not disassemble Do not touch Important to read and understand at all times Disconnect the plug from the outlet Grounding to prevent an electric shock...
  • Page 3: Installation

    Power When not used for extended periods of time, set your PC to DPMS. If using a screen saver, set it to the active screen mode. Do not use a damaged or loose plug. This may cause an electric shock or fire. Do not pull the plug out by the wire nor touch the plug with wet hands.
  • Page 4 Do not drop the monitor when moving it. This may cause damage to the product or human body. Place the monitor on a flat and stable surface. The monitor can cause injury by falling. Set down the monitor carefully. It could be damaged or broken. Do not place the monitor face down.
  • Page 5 Do not spray water or detergent directly on the monitor. This may cause damage, electric shock or a fire. Use the recommended detergent with a smooth cloth. If the connector between the plug and the pin is dusty or dirty, clean it properly with a dry cloth.
  • Page 6 If the monitor is dropped or the casing is damaged, turn the monitor off and unplug the power cord. The monitor may malfunction, causing an electric shock or a fire. Then contact the Service Center Keep the power off when there is thunder and lightening outside, or let the monitor remain unused for an extended period of time.
  • Page 7 Do not insert metal objects such as utensils, wire or drill bits, or things that catch fire easily, such as pieces of paper or matches, into the vents or the headphone or A/V ports on the monitor. This may cause malfunction, an electric shock or a fire. Always contact the Service Center monitor.
  • Page 8 SyncMaster 710V/910V/712V Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Unpacking Monitor Monitor Bottom Hanger Manual User's Guide, Monitor Dirver, Natural Color Quick Setup Guide Warranty Card software, MagicTune™ software CD...
  • Page 9: Menu Button

    Cable D-Sub Cable Front Menu button [ ] Use this button to open the on-screen menu and exits from the menu screen or closes screen adjustment menu. MagicBright™ MagicBright™ is a new feature providing optimum viewing environment button [ depending on the contents of the image you are watching. Currently four different modes are available: Custom, Text, Internet, and Entertain.
  • Page 10 PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods. Rear (The configuration at the back of the monitor may vary from product to product.) Power port D-sub 15-pin port Connecting Your Monitor...
  • Page 11 SyncMaster 510M/710M/910M Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Unpacking Monitor Monitor Bottom Hanger Manual User's Guide, Monitor Dirver, Natural Color Quick Setup Guide Warranty Card software, MagicTune™ software CD...
  • Page 12 Cable D-Sub Cable Front Menu button [ ] Use this button for open the on-screen menu and exits from the menu screen or closes screen adjustment menu. MagicBright™ MagicBright™ is a new feature providing optimum viewing environment button [ depending on the contents of the image you are watching. Currently four different modes are available: Custom, Text, Internet, and Entertain.
  • Page 13 Power button [ ] / Power indicator Volume button [ ] 2,4. Adjust buttons [ Enter button [ ]/ Auto button PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods.
  • Page 14 1. Headphone connection terminal [ ] 2. PC sound connection terminal Connect the audio cable for your monitor to the audio port on the back of your computer. Connecting Your Monitor for further information regarding cable connections.
  • Page 15 Connect the power cord for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet. 2-1. Using the D-sub (Analog) connector on the video card. Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor. 2-2.
  • Page 16: Monitor Assembly

    Monitor Assembly 1. Monitor and Bottom 2. Monitor and Hanger Attaching a base This monitor accepts a 100 mm x 100 mm VESA-compliant mounting interface pad. A. Monitor B. Mounting interface pad Turn off your monitor and unplug its power cord. Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the screen.
  • Page 17 Driver installation is slightly different from one operating system to another. Follow the directions as appropriate for the operating system you have. Prepare a blank disk and download the driver program file at the Internet web site shown here. Internet web http://www.samsung-monitor.com/ site : http://www.samsungusa.com/monitor http://www.sec.co.kr/monitor http://www.samsungmonitor.com.cn/ Windows ME 1.
  • Page 18 4. If you can see following "Message" window, then click the "Continue Anyway" button. Then click "OK" button. This monitor driver is under certifying MS logo,and this installation don't damage your system.The certified driver will be posted on Samsung Monitor Homepage http://www.samsung-monitor.com/. 5. Monitor driver installation is completed.
  • Page 19 3. Click "Display" icon and choose the "Settings" tab then click "Advanced..". 4. Click the "Properties" button on the "Monitor" tab and select "Driver" tab. 5. Click "Update Driver.." and select "Install from a list or.." then click "Next" button. 6.
  • Page 20 8. If you can see following "Message" window, then click the "Continue Anyway" button. Then click "OK" button. This monitor driver is under certifying MS logo,and this installation don't damage your system.The certified driver will be posted on Samsung Monitor Homepage http://www.samsung-monitor.com/ 9. Click the "Close" button then click "OK" button continually.
  • Page 21: Microsoft ® Windows ® Millennium Operating System

    10. Monitor driver installation is completed. ® ® Microsoft Windows 2000 Operating System When you can see "Digital Signature Not Found" on your monitor, follow these steps. 1. Choose "OK" button on the "Insert disk" window. 2. Click the "Browse" button on the "File Needed" window. 3.
  • Page 22: Linux Operating System

    1. Click Start, Settings, Control Panel, and then double-click Display icon. 2. In Display Registration Information window, click Settings Tab and then click All Display Modes. 3. Select a mode that you wish to use (Resolution, Number of colors and Vertical frequency) and then click OK.
  • Page 23 SyncMaster 710V/910V/712V 1. Opens the OSD menu. Also used to exit the OSD menu or return to the previous menu. 2. These buttons allow you to adjust items in the menu. 3. These buttons allow you to adjust items in the menu. 4.
  • Page 24 AUTO Menu When the 'AUTO' button is pressed, the Auto Adjustment screen appears as shown in the animated screen on the center. Auto adjustment allows the monitor to self-adjust to the incoming video signal. AUTO The values of fine, coarse and position are adjusted automatically. To make the automatic adjustment function sharper, execute the 'AUTO' function while the AUTO PATTERN...
  • Page 25 Brightness Menu Description Brightness Adjust Brightness.
  • Page 26 Picture Menu Adjust the Brightness. Brightness Direct Access Feature : When OSD is not on the screen, Push the button to adjust brightness. Contrast Adjust the Contrast. Color Menu The tone of the color can be changed and one of four modes Color Tone can be selected - Cool, normal, Warm and Custom.
  • Page 27 Image Menu Image is used to fine tune and get the best image by removing noises that creates unstable images with jitters and shimmers. Coarse If satisfactory results are not obtained using the Fine adjustment, use the Coarse adjustment and then use Fine again.
  • Page 28: Display Time

    Menu Follow these steps to change the language used in the menu. You can choose one of seven languages. (English, German, Language Spanish, French, Italian, Swedish, Russian) Note:The language chosen affects only the language of the OSD. It has no effect on any software running on the computer. You can change the horizontal position where the OSD menu H-Position appears on your monitor.
  • Page 29 Setup Menu Image Reset Image parameters are replaced with the factory default values. Color Reset Color parameters are replaced with the factory default values. Information Menu Information Shows a video source, display mode on the OSD screen. Description Description Play/Stop...
  • Page 30 SyncMaster 510M/710M/910M 1. Opens the OSD menu. Also used to exit the OSD menu or return to the previous menu. 2. These buttons allow you to adjust items in the menu. 3. These buttons allow you to adjust items in the menu. 4.
  • Page 31 AUTO Menu When the 'AUTO' button is pressed, the Auto Adjustment screen appears as shown in the animated screen on the center. Auto adjustment allows the monitor to self-adjust to the incoming video signal. AUTO The values of fine, coarse and position are adjusted automatically. To make the automatic adjustment function sharper, execute the 'AUTO' function while the AUTO PATTERN...
  • Page 32 - four different mode (Custom/Text/Internet/Entertain) Brightness Menu Description Brightness Adjust Brightness.
  • Page 33 Picture Menu Adjust the Brightness. Brightness Direct Access Feature : When OSD is not on the screen, Push the button to adjust brightness. Contrast Adjust the Contrast. Color Menu The tone of the color can be changed and one of four modes Color Tone can be selected - Cool, normal, Warm and Custom.
  • Page 34 Color Control Follow these steps to adjust individual R,G,B color balance. Gamma Select one of three pre-defined gammas. Image Menu Removes noise such as vertical stripes. Coarse adjustment may Coarse move the screen image area. You may relocate it to the center using the Horizontal Control menu.
  • Page 35 Menu Follow these steps to change the language used in the menu. You can choose one of seven languages. (English, German, Language Spanish, French, Italian, Swedish, Russian) Note:The language chosen affects only the language of the OSD. It has no effect on any software running on the computer. You can change the horizontal position where the OSD menu H-Position appears on your monitor.
  • Page 36 Setup Menu Image Reset Image parameters are replaced with the factory default values. Color Reset Color parameters are replaced with the factory default values. Information Menu Information Shows a video source, display mode on the OSD screen. Description Description Play/Stop...
  • Page 37 Before calling for service, check the information in this section to see if you can remedy any problems yourself. If you do need assistance, please call the phone number on the warranty card, the phone number on the Information section or contact your Symptom No images on the Is the power cord connected properly?
  • Page 38: The Screen Suddenly Has Become Unbalanced

    There is no image on the screen. Is the power indicator on the monitor blinking at 1 second intervals? The screen shows Is the screen displaying only one color strange colors or just as if looking at the screen through a black and white.
  • Page 39: Self-Test Feature Check

    driver and the monitor driver. 4. Check if the scanning ratio of the video screen is set at 75Hz. (Do not exceed 60Hz when using the maximum resolution.) 5. If you have problems in installing the adapter (video) driver, boot the computer in Safe Mode, remove the Display Adapter at the "Control Panel→System→Device Administrator"...
  • Page 40: Warning Messages

    Failure of any of the boxes to appear indicates a problem with your monitor. This box also appears during normal operation if the video cable becomes disconnected or damaged. 4. Turn off your monitor and reconnect the video cable; then turn on both your computer and the monitor. If your monitor screen remains blank after using the previous procedure, check your video controller and computer system;...
  • Page 41 General General Model Name LCD Panel Size Display area Pixel Pitch Type Synchronization Horizontal Vertical Display Color 16,194,277 Colors Resolution Optimum resolution Maximum resolution Input Signal, Terminated RGB Analog, 0.7 Vpp positive at 75 ohms Separate H/V sync, TTL level positive or negative. Maximum Pixel Clock 140 MHz Power Supply...
  • Page 42 Humidity: 5% ~ 95%, non-condensing Power saving mode EPA/ENERGY 2000 Green, Blinking Green (Off-mode) Less than 1W ® ® Partner, SAMSUNG has determined that this product ® guidelines for energy efficiency. Power Switch off Black (at 120V) Less than 1W compliant and ENERGY2000 compliant...
  • Page 43: Horizontal Frequency (Khz)

    Preset Timing Modes If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual and adjust the screen as follows.
  • Page 44 General General Model Name LCD Panel Size Display area Pixel Pitch Type Synchronization Horizontal Vertical Display Color 16,194,277 Colors Resolution Optimum resolution Maximum resolution Input Signal, Terminated RGB Analog, 0.7 Vpp positive at 75 ohms Separate H/V sync, TTL level positive or negative. Maximum Pixel Clock 140 MHz Power Supply...
  • Page 45 Humidity: 5% ~ 95%, non-condensing Power saving mode EPA/ENERGY 2000 Green, Blinking Green (Off-mode) Less than 1W ® ® Partner, SAMSUNG has determined that this product ® guidelines for energy efficiency. Power Switch off Black (at 120V) Less than 1W compliant and ENERGY2000 compliant...
  • Page 46: Preset Timing Modes

    Preset Timing Modes If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual and adjust the screen as follows.
  • Page 47 General General Model Name LCD Panel Size Display area Pixel Pitch Type Synchronization Horizontal Vertical Display Color 16,194,277 Colors Resolution Optimum resolution Maximum resolution Input Signal, Terminated RGB Analog, 0.7 Vpp positive at 75 ohms Separate H/V sync, TTL level positive or negative. Maximum Pixel Clock 140 MHz Power Supply...
  • Page 48 Less than 1W This monitor is EPA ENERGY STAR when used with a computer equipped with VESA DPMS functionality. ® As an ENERGY STAR Partner, SAMSUNG has determined that this product Power Switch off Black (at 120V) Less than 1W ®...
  • Page 49 Preset Timing Modes If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual and adjust the screen as follows.
  • Page 50 General General Model Name LCD Panel Size Display area Pixel Pitch Type Synchronization Horizontal Vertical Display Color 16,194,277 Colors Resolution Optimum resolution Maximum resolution Input Signal, Terminated RGB Analog, 0.7 Vpp positive at 75 ohms Separate H/V sync, TTL level positive or negative. Maximum Pixel Clock 140 MHz Power Supply...
  • Page 51 Humidity: 5% ~ 95%, non-condensing Power saving mode EPA/ENERGY 2000 Green, Blinking Green (Off-mode) Less than 1W ® ® Partner, SAMSUNG has determined that this product ® guidelines for energy efficiency. Power Switch off Black (at 120V) Less than 1W compliant and ENERGY2000 compliant...
  • Page 52 Preset Timing Modes If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual and adjust the screen as follows.
  • Page 53 General General Model Name LCD Panel Size Display area Pixel Pitch Type Synchronization Horizontal Vertical Display Color 16,194,277 Colors Resolution Optimum resolution Maximum resolution Input Signal, Terminated RGB Analog, 0.7 Vpp positive at 75 ohms Separate H/V sync, TTL level positive or negative. Maximum Pixel Clock 140 MHz Power Supply...
  • Page 54 This monitor is EPA ENERGY STAR when used with a computer equipped with VESA DPMS functionality. ® As an ENERGY STAR Partner, SAMSUNG has determined that this product ® meets the ENERGY STAR guidelines for energy efficiency. Power Switch off...
  • Page 55 Preset Timing Modes If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual and adjust the screen as follows.
  • Page 56 General General Model Name LCD Panel Size Display area Pixel Pitch Type Synchronization Horizontal Vertical Display Color 16,194,277 Colors Resolution Optimum resolution Maximum resolution Input Signal, Terminated RGB Analog, 0.7 Vpp positive at 75 ohms Separate H/V sync, TTL level positive or negative. Maximum Pixel Clock 140 MHz Power Supply...
  • Page 57 Less than 1W This monitor is EPA ENERGY STAR when used with a computer equipped with VESA DPMS functionality. ® As an ENERGY STAR Partner, SAMSUNG has determined that this product Power Switch off Black (at 120V) Less than 1W ®...
  • Page 58 meets the ENERGY STAR Preset Timing Modes If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual and adjust the screen as follows.
  • Page 59 Service AUSTRALIA : Samsung Electronics Australia Pty Ltd. Customer Response Centre 7 Parkview Drive, Homebush Bay NSW 2127 Tel : 1300 362 603 http://www.samsung.com.au/ BRAZIL : Samsung Eletronica da Amazonia Ltda. R. Prof. Manoelito de Ornellas, 303, Terro B Chacara Sto. Antonio, CEP : 04719-040...
  • Page 60 Gustavo A.Madero C.P.07700, Mexico D.F. Mexico TEL. 52-55-5747-5100 Fax. 52-55-47 52 02 RFC: SEM950215S98 http://www.samsung.com.mx/ IMPORTADO POR: SAMSUNG ELECTRONICS MEXICO. S.A. DE C.V. Saturno NO.44, Col. Nueva Industrial Vallejo Gustavo A.Madero C.P.07700, Mexico D.F. Mexico TEL. 52-55-5747-5100 EXPORTADO POR: Samsung Electronics CO.,LTD.
  • Page 61 Tel. 214 148 114/100 Fax. 214 148 133/128 Free Line 800 220 120 http://www.samsung.pt/ SOUTH AFRICA : Samsung Electronics,5 Libertas Road, Somerset Office Park, Bryanston Ext 16. Po Box 70006, Bryanston,2021, South Africa Tel : 0027-11-549-1621 Fax : 0027-11-549-1629 http://www.samsung.co.za/...
  • Page 62 UKRAINE : SAMSUNG ELECTRONICS REPRESENTATIVE OFFICE IN UKRAINE 4 Glybochitska str. Kiev, Ukraine Tel. 8-044-4906878 Fax 8-044-4906887 Toll-free 8-800-502-0000 http://www.samsung.com.ua/ United Kingdom : Samsung Electronics (UK) Ltd. Samsung House, 225 Hook Rise South Surbiton, Surrey KT6 7LD Tel. : (0208) 391 0168 Fax.
  • Page 63: For Better Display

    Reproduction in any manner whatsoever without the written permission of Samsung Electronics Co., Ltd. is strictly forbidden. Samsung Electronics Co., Ltd. shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
  • Page 64 Video Electronics Standard Association; the name and logo are registered trademarks of the U.S. Environmental Protection Agency (EPA). As an ENERGY STAR Partner, Samsung Electronics Co., Ltd. has determined that this product meets the ENERGY STAR guidelines for energy efficiency. All other product names mentioned herein may be the trademarks or registered trademarks of their respective owners.

Table of Contents