Table of Contents
Advertisement
GE2/GE3 (POWER) BOARD, SWITCH UNIT
AND SPEAKER REMOVAL
A Remove 5 screws from GE2/GE3 Board
B Disconnect 4 connectors from GE2/GE3 Board
C Lift up AC Power Cord to detach from LCD Panel
D Lift up Switch Unit and disconnect 1 connector to detach from Bezel
E Remove 1 screw from right side Speaker (KDL-46EX527Only)
F Slide-out right side Speaker to detach from Bezel
G Remove 1 screw from left side Speaker (KDL-46EX527Only)
H Slide-out left side Speaker to detach from Bezel
I
Release 2 clips to detach Side Jack Bracket from BATV Board
J Gently peel-off Side Jack Label to detach from LCD Panel
Note: The Side Jack Label is not included with the LCD Panel and must be replaced when replacing the LCD Panel.
A
C
D
E
F
KDL-32EX427/32EX527/40EX527/46EX527
SECTION 6 - DISASSEMBLY/PART NUMBER INFORMATION
B
I
J
G
H
NOTE: The components identified by shading
and
mark are critical for safety. Replace only
!
with part number specified.
101
102
103
104
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
101
1-474-277-12
GE2A BOARD, COMPLETE
(KDL-32EX427/32EX527 ONLY)
101
1-474-287-11
GE3A BOARD, COMPLETE
(KDL-40EX527/46EX527 ONLY)
102
1-489-443-11
SWITCH UNIT
! 103
1-838-797-11
POWER-SUPPLY CORD (WITH CONN.)
104
1-858-590-12
LOUDSPEAKER
(KDL-32EX427/32EX527 ONLY)
104
1-858-592-11
LOUDSPEAKER
(KDL-40EX527/46EX527 ONLY)
NOTE: The components identified by a red outline and a
mark contain
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
105
106
104
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
105
4-265-832-02
BRACKET SIDE (BAT-V32)
(KDL-32EX427/32EX527 ONLY)
105
4-265-828-01
BRACKET SIDE (BAT-V MOLD)
(KDL-40EX527/46EX527 ONLY)
106
4-258-701-01
LABEL (BAT-V MOLD SIDE)
(KDL-32EX427/32EX527 ONLY)
106
4-256-435-11
LABEL, SHEET (BAT-V MOLD SIDE)
(KDL-40EX527/46EX527 ONLY)
2-990-421-41
SCREW (+PSW) (M3X6)
47
Advertisement
Chapters
Table of Contents
