Advertisement
Quick Links
Please read this manual carefully before using the Cambo CSMFC-22!
CAUTION
Please be careful when using the CSMFC-22 follow focus on lenses with a stiff/rigid
turning focus ring. In this particular case excessive force on the focus knob could lead
to damaging the internal gear drive of the CSMFC-22 unit.
A
Focus Gear M0.8 45 teeth (standard)
B
Mounting hole clamp arm
C
Gear flange
D
Adjustable clamp arm
E
Clamp knob (adjustable clamp arm)
F
Accessory mount (star knob/speed crank/whip)
G
Focus knob
H
Marking scale
I
Focus housing
► Changing the focus gear
To change the focus gear (A) please unscrew the "gear lock" (L) counter clockwise. When the gear lock is loosened
the gear can slide off the gear flange (C). The focus gear can be positioned left or right side of the housing.
When using the CSMFC-22 on lenses with the focus ring near to the camera body, its advisable to use the gear on
the side closed to the camera.
► Changing marking scale
The scale (H) uses magnetic fixation. To take off the scale, please grasp both sides and pull off the scale. For
mounting; slide the scale over the focus knob and align the notch with the blocking switch (O) until is snaps into place.
It's advised to use a pencil or standard fineliner for setting the marks. Don't use permanent marking pens for setting
the marks. The marking scales are also sold separately as a spare item.
INSTRUCTION MANUAL
J
Hex bold (M4x10 DIN912) to fix the clamp arm
K
Spring washer (4 DIN7980)
L
Gear lock
M
Locking knob hard-stop
N
Hard-stop indicator
O
Blocking switch
P
Locking knob 15mm dual rod clamp
Q
Dual 15mm rod clamp
Instruction Manual Dual 15mm Rod Follow Focus Unit
CSMFC-22
Dual 15mm Rod Follow Focus Unit
EN
1
Advertisement
Related Manuals for Cambo CSMFC-22
Summary of Contents for Cambo CSMFC-22
- Page 1 (C). The focus gear can be positioned left or right side of the housing. When using the CSMFC-22 on lenses with the focus ring near to the camera body, its advisable to use the gear on the side closed to the camera.
- Page 2 There is now room for changing the lens. After changing the lens please loosen the clamp knob, set the focus unit to the desired angle and gently press the focus-gear to the lens strip and finally tighten the clamp knob. Cambo Photographic Industry B.V. / Cambo Video and Broadcast Products B.V. Cambo R&D 26-4-2013 This instruction manual is prepared with care, although no responsibility, financial or otherwise, is accepted for any consequences related the information stated in this instruction manual.