Control Settings - NEC E328 User Manual
Digital signage display
Hide thumbs
Also See for E328:
- User manual (90 pages) ,
- User manual (88 pages) ,
- Setup manual (16 pages)
Table of Contents
Advertisement
Control Settings
Control Settings
Control Interface
LAN
RS-232C
Network Settings
DHCP
IP ADDRESS
SUBNET MASK
DEFAULT GATEWAY
DNS PRIMARY
DNS SECONDARY
MAC ADDRESS
SAVE
Monitor ID
Reset Network Settings
NOTEN
Only one method, LAN or RS-232, can be used at the same time.
Sets network (LAN) control.
Sets RS-232C control.
Configures the network settings of the monitor.
OnN Obtains the network settings from the DHCP server on the network.
OffN Sets fixed networks settings.
Manual DNSN Obtain the network settings from the DHCP server on the network but the DNS
is set manually.
Set the IP address of the monitor when [DHCP] is set to [Off].
Set the subnet mask for the network to which the monitor is connected when [Off] is selected
for [DHCP].
Set the default gateway for the network to which the monitor is connected when [Off] is
selected for [DHCP].
Enter the IP address of the primary DNS server of the network connected to the monitor.
NOTEN
Enter [0.0.0.0] to delete the setting.
Enter the IP address of the secondary DNS server of the network connected to the monitor.
NOTEN
Enter [0.0.0.0] to delete the setting.
Shows the monitor's MAC ADDRESS.
This cannot be changed.
Saves the settings.
Sets an ID number for control.
The monitor ID number can be set between 1 and 100.
Returns the network settings to their default values.
English - 77
Hide quick links:
Advertisement
Table of Contents
