hit counter script
DeWalt DCF886 Instruction Manual
Hide thumbs Also See for DCF886:

Advertisement

Quick Links

Definitions: Safety Alert Symbols and Words
This instruction manual uses the following safety alert symbols and words to alert you to hazardous situations and your risk
of personal injury or property damage.

DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

(Used without word) Indicates a safety related message.
NOTICE: Indicates a practice not related to personal injury which, if not avoided, may result in property damage.
Fig. A
7
4
3
7
1
2
5
DCF886
Trigger switch
1
Forward/reverse button
2
Chuck collar
3
1/4" (6.35 mm) hex quick-release chuck (DCF886)
4
Battery release button
5
Battery pack
6
Worklight
7
Belt hook (optional accessory)
8
Mounting screw
9
Anvil
10
Hog ring (DCF890)
11
6
DCF890

WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
WARNING: To reduce the risk of injury, read the
instruction manual.
if you have any questions or comments about this or
any D
WALT tool, call us toll free at:
e
1-800-4-D
WALT (1-800-433-9258).
e
English
7
7
8
9
10
11
1

Advertisement

Table of Contents
loading

Summary of Contents for DeWalt DCF886

  • Page 1 WARNING! Read all safety warnings and all Chuck collar instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or 1/4" (6.35 mm) hex quick-release chuck (DCF886) serious injury. Battery release button WARNING: To reduce the risk of injury, read the Battery pack instruction manual.
  • Page 2: General Power Tool Safety Warnings

    English GENERAL POWER TOOL SAFETY WARNINGS b ) Use personal protective equipment. Always wear eye protection. Protective equipment such as dust WARNING! Read all safety warnings and all mask, non-skid safety shoes, hard hat, or hearing instructions. Failure to follow the warnings and protection used for appropriate conditions will reduce instructions may result in electric shock, fire and/or personal injuries.
  • Page 3: Additional Specific Safety Rules

    English into account the working conditions and the • ANSI Z87.1 eye protection (CAN/CSA Z94.3), work to be performed. Use of the power tool for • ANSI S12.6 (S3.19) hearing protection, operations different from those intended could result • NIOSH/OSHA/MSHA respiratory protection. in a hazardous situation.
  • Page 4: Batteries And Chargers

    English battery liquid gets into the eye, rinse water over the open ...... Class II ..... wear respiratory eye for 15 minutes or until irritation ceases. If medical Construction protection attention is needed, the battery electrolyte is composed of (double insulated) .....
  • Page 5 1-800-4-D WALT (1-800-433-9258) or the gauge number of the wire, the greater the capacity visit our website www.dewalt.com. of the cable, that is, 16 gauge has more capacity than 18 The RBRC® Seal gauge. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating.
  • Page 6: Charger Operation

    English battery pack in the cavity. Unplug the charger before Minimum gauge for Cord sets attempting to clean. Total length of Cord in Feet Volts (meters) Charging a Battery (Fig. C) 120 V 25 (7.6) 50 (15.2) 100 (30.5) 150 (45.7) 1.
  • Page 7: Electronic Protection System

    English refusing to light or by displaying a problem pack or charger (+4.5 °C), or above +104 °F (+40 °C). This is important blink pattern. and will prevent serious damage to the battery pack. nOTE: This could also mean a problem with a charger. 2.
  • Page 8: Intended Use

    English INTENDED USE FIG. D These impact wrench/drivers are designed for professional impact screwdriving applications. The impact function makes this tool particularly useful for driving fasteners in wood, metal and concrete. DO nOT use under wet conditions or in presence of flammable liquids or gases.
  • Page 9: Maintenance

    20 seconds. If the Cat # Ft.-Lbs. In.-Lbs. trigger switch remains depressed, the worklights will remain DCF886 1500 nOTE: The worklights are for lighting the immediate work DCF890 1800 surface and are not intended to be used as a flashlight.
  • Page 10: Register Online

    Accessories after purchase. 2 YEARs FREE sERViCE On DEWAlT BATTERY PACKs WARNING: Since accessories, other than those DC9071, DC9091, DC9096, DC9182, DC9280, DC9360, DCB120, offered by D...
  • Page 11 (Si utilisé sans aucun terme) Indique un message propre à la sécurité. AVIS : indique une pratique ne posant aucun risque de dommages corporels mais qui par contre, si rien n’est fait pour l’éviter, pourrait poser des risques de dommages matériels. Fig. A DCF886 DCF890 Gâchette Bouton de marche avant/arrière...

This manual is also suitable for:

Dcf890

Table of Contents