Table of Contents
Advertisement
5
Connecting PMC Network Interface Cards
Table 7 NIC PCI Frequency
NIC or interface port
Four-port copper Gigabit Ethernet
(10/100/1000)
Two-port copper Gigabit Ethernet
(10/100/1000)
Two-port fiber-optic Gigabit Ethernet
Caution
To protect the IP560 and the memory modules from electrostatic
discharge damage, make sure you are properly grounded before you
touch these components. Use a grounding wrist strap and follow the
instructions provided with the wrist strap before you handle the
components or open the appliance.
Four-Port 10/100 Ethernet NIC
The IP560 supports Nokia-approved, four-port UTP5 dual-mode (10-Mbps
and 100-Mbps) Ethernet NICs installed in a PMC expansion slot. When you
purchase a 10/100 Ethernet NIC with your IP560, the NIC is installed before
the appliance is delivered to you. For information about how to add or replace
a NIC, see
10/100 Ethernet NIC Features
The four-port 10/100 Ethernet NIC supports PCI operation at 133 MHz and
runs on Nokia IPSO v4.0.1 or higher.
In the IP560, the four-port Ethernet NIC supports the following features:
68
Chapter 4, "Installing and Replacing Network Interface Cards."
Maximum PCI operation
supported
133 MHz
133 MHz
133 MHz
IP560 Security Platform Installation Guide
Advertisement
Table of Contents
Troubleshooting
