1
Unpack the Printer
1
Carefully remove all items from the box.
BJC-55 Printer
Power Cord
AC Adapter
BC-11e Color
BJ Cartridge
BC-10 Black
BJ Cartridge
BCI-11 Color Ink Tank
(for future use)
BCI-11 Black Ink Tank
(for future use)
SB-10 Ink Cartridge
Storage Box
Battery Pack
Documentation
and Software Kit
NOTE: Electronic User's Guide is included on
the CD-ROM.
2
Prepare the Printer
1
Remove all shipping tape and materials
from the unit.
Shipping Tape
Open the front cover.
2
Front cover
Align the marks
on the printer and
3
the battery pack. Insert the left end of the
battery pack into the printer at a slight angle.
4
Press on the right side of the battery pack
to lock it in place.
5
Close the front cover.
NOTE: You must install the battery pack. If the
battery pack is not installed when you turn on
the printer, the CHARGE/ERROR lamp will light
orange and the printer will beep six times.
Start Here
Easy Setup Instructions
3
Connect the Adapter
Insert the power cord into the AC Adapter.
1
AC Adapter
Power Cord
2
Plug the DC plug into the right side
of the printer.
DC plug
NOTE: The green CHARGE/ERROR light stays on
until the battery pack is completely charged
(approximately 4 to 6 hours).
Check the power lock switch on the right
3
side of the printer. Move it to the
mark.
Lock Switch
NOTE: When the power lock switch is to the
left, you cannot turn the printer on.
Press the POWER button to turn on the
4
printer.
Power Button
4
Install the Canon BJ Cartridge
1
Remove the BC-11e Color BJ Cartridge
from its package.
2
You MUST remove these protective
materials:
Remove
Orange cap
•
Tape
Orange
•
tape
Remove
Cap
Do Not Touch
these areas
Lift the top cover.
3
Top Cover
Cartridge Holder
moves to the center
4
Align the marks
on the BJ cartridge
and the cartridge holder; insert the cartridge
into the holder at a slight angle.
5
Gently press down on the BJ cartridge
until it locks into place.
6
Close the top cover and press the
CARTRIDGE button.
Cartridge Button
Wait a few moments while the BJ cartridge
and holder move to the left side of the
printer.
Color Bubble Jet Printer
BJC-55
5
Connect to Your Computer
Turn OFF your printer.
1
IMPORTANT: Be sure the printer
is off before continuing, or the
computer will attempt to install
the printer driver before the
printer is ready.
Connect one end of a USB cable (not
2
included) to the computer, the other
to the printer.
USB
connection
USB
cable
USB
port
Continue with Step 6
on side two.