Table of Contents
Advertisement
Figure 179. Removing the MicroSD card
Next steps
1.
Replace the MicroSD
Installing the MicroSD card
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
NOTE:
To use an MicroSD card with your system, ensure that the Internal SD Card Port is enabled in System Setup.
NOTE:
Ensure that you install the MicroSD cards into the same slots based on the labels you had marked on the cards
during removal.
Steps
1. Locate the MicroSD card slot on the IDSDM module. Orient the MicroSD card appropriately and insert the contact-pin end of
the card into the slot. To locate IDSDM, see the
NOTE:
The slot is keyed to ensure correct insertion of the card.
2. Press the card into the slot to lock it into place.
178
Installing and removing system components
cards.
Safety
Before working inside your
instructions.
system.
System board jumpers and connectors
section.
- Quick Links:
- Front View of the System
Hide quick links:
Advertisement
Table of Contents
