Troubleshooting; Understanding The Diagnostic Ace Display; Verifying The Interlock Switch Function - Toro Reelmaster 3555 Operator's Manual

Traction unit

Hide thumbs Also See for Reelmaster 3555:

Table of Contents

Troubleshooting

The machine is equipped with an electronic controller that controls most machine functions. The controller

determines what function is required for various input switches (i.e., seat switch, key switch, etc.) and turns on

the outputs to actuate solenoids or relays for the requested machine function.

For the electronic controller to control the machine as desired, each of the input switches, output solenoids, and

relays must be connected and functioning properly.

Use the Diagnostic ACE display to help verify and correct electrical functions of the machine.

Park the machine on a level surface, lower the cutting units, engage the parking brake, and shut off

the engine.

Remove the cover from the control panel.

Locate the wire harness and loop-back connector

1. Loop-back connector

Carefully unplug the loop-back connector from the harness connector.

Connect the Diagnostic ACE display connector to the harness connector

Note:

Ensure that the correct overlay decal is positioned on the Diagnostic ACE display.

(Figure

100).

Figure 100

(Figure

101).

g020260

Table of Contents

Show Quick Links

Table of Contents

Reelmaster 3575 3550