Page 1
Internal Use Only Website:http://biz.LGservice.com E-mail:http://www.LGEservice.com/techsup.html COLOR MONITOR SERVICE MANUAL CHASSIS NO. : LM13I MODEL: 20EN33SS (20EN33SS-BA) ) **Same model for Service CAUTION BEFORE SERVICING THE UNIT, READ THE SAFETY PRECAUTIONS IN THIS MANUAL.
Horizontal : 30 ~ 83kHz Vertical : 56 ~ 75Hz Net. Weight : 2.2 kg Gross Weight : 3.2kg Copyright 2010 LG Electronics. Inc. All right reserved. - 2 - LGE Internal Use Only Only for training and service purposes...
CAUTION Please use only a plastic screwdriver to protect yourself from shock hazard during service operation. Copyright 2010 LG Electronics. Inc. All right reserved. - 3 - LGE Internal Use Only Only for training and service purposes...
Page 4
8. Always connect the test receiver ground lead to the receiver chassis ground before connecting the test receiver positive lead. Always remove the test receiver ground lead last. Copyright 2010 LG Electronics. Inc. All right reserved. - 4 - LGE Internal Use Only Only for training and service purposes...
Page 5
IC. circuit board to prevent excessive component temperatures. Copyright 2010 LG Electronics. Inc. All right reserved. - 5 - LGE Internal Use Only Only for training and service purposes...
Page 6
Solder the overlapped area and clip off any excess jumper wire. Copyright 2010 LG Electronics. Inc. All right reserved. - 6 - LGE Internal Use Only Only for training and service purposes...
H(Pixels) 67.500 1600 1152 1152 x 108.0 V(Lines) 75.000 H(Pixels) 60.00 1800 1600 1600 x 108.0 V(Lines) 60.00 1000 Copyright 2010 LG Electronics. Inc. All right reserved. - 7 - LGE Internal Use Only Only for training and service purposes...
1. Pull the front cover upward. 2. Then, let the all latches are separated. 3. Put the front face down. Disassemble back cover. 2010 LG Electronics. Inc. All right reserved. Copyright LGE Internal Use Only Only for training and service purposes...
The Micom distinguishes polarity and frequency of the H/V sync are supplied from signal cable. The controlled data of each modes is stored in. Copyright 2010 LG Electronics. Inc. All right reserved. - 10 - LGE Internal Use Only Only for training and service purposes...
Click “ Write” button c) Remove all default number d) Add 300-3FF e) Click Start button. f) Click Exit button. Copyright 2010 LG Electronics. Inc. All right reserved. - 11 - LGE Internal Use Only Only for training and service purposes...
Page 12
(110V/220V) 74LS06 Power LED 4.7K 74LS06 ST Switch V-Sync On/Off Switch (Switch must be ON.) Figure 1. Cable Connection Copyright 2010 LG Electronics. Inc. All right reserved. - 12 - LGE Internal Use Only Only for training and service purposes...
CHECK CRYSTAL(X100) PULSE CHECK IC103 Waveforms IC102 PIN3 (5V) IC103 PIN27 (1.2V) IC103 PIN 25 (3.3V) IC103 PIN42,43 1.2V Copyright 2010 LG Electronics. Inc. All right reserved. - 13 - LGE Internal Use Only Only for training and service purposes...
Page 14
3. TROUBLE IN IC103 CHECK CHECK CONNECTION LINE IC103 PIN36(V-SYNC) FROM D-SUB TO IC103 And PIN35(H-SYNC) TROUBLE IN CABLE OR LCD MODULE Copyright 2010 LG Electronics. Inc. All right reserved. - 14 - LGE Internal Use Only Only for training and service purposes...
Page 15
INTO DPM MODE CHECK IC103 PIN35,36 CHECK H/V SYNC LINE SYNC PULSE TROUBLE IN IC103 Waveforms 1 H-SYNC 2 V-SYNC Copyright 2010 LG Electronics. Inc. All right reserved. - 15 - LGE Internal Use Only Only for training and service purposes...
WIRING DIAGRAM LGD:EAD62122568 MAIN BOARD EAD62186001 EAD38438703 6631900011S Copyright 2010 LG Electronics. Inc. All right reserved. - 16 - LGE Internal Use Only Only for training and service purposes...