Cisco Catalyst 9200 Configuration Manual page 257
Hide thumbs
Also See for Catalyst 9200:
- Hardware installation manual (128 pages) ,
- Installing manual (8 pages) ,
- Instructions (4 pages)
Table of Contents
Advertisement
Troubleshooting the Software Configuration
3. IOS syslogs (not guaranteed in case of non-active crashes)
4. System process information
5. Bootup logs
6. Reload logs
7. Certain types of /proc information
This information is stored in separate files which are then archived and compressed into one bundle. This
makes it convenient to get a crash snapshot in one place, and can be then moved off the box for analysis. This
report is generated before the switch goes down to rommon/bootloader.
Except for the full core and tracelogs, everything else is a text file.
Use the request platform software process core fed active command to generate the core dump.
h2-macallan1# request platform software process core fed active
Process : fed main event (28155) encountered fatal signal 6
Process : fed main event stack :
SUCCESS: Core file generated.
h2-macallan1#dir bootflash:core
Directory of bootflash:/core/
178483
194710
178494
h2-macallan1_RP_0_fed_28155_20170823-094616-UTC.core.gz
Crashinfo Files
By default the system report file will be generated and saved into the /crashinfo directory. Ifit cannot be saved
to the crashinfo partition for lack of space, then it will be saved to the /flash directory.
To display the files, enter the dir crashinfo: command. The following is sample output of a crashinfo directory:
System reports are located in the crashinfo directory in the following format:
system-report_[switch number]_[date]-[timestamp]-UTC.gz
After a switch crashes, check for a system report file. The name of the most recently generated system report
file is stored in the last_systemreport file under the crashinfo directory. The system report and crashinfo files
assist TAC while troubleshooting the issue.
The system report generated can be further copied using TFTP, HTTP and few other options.
Switch#copy crashinfo: ?
crashinfo:
flash:
ftp:
http:
https:
null:
nvram:
rcp:
running-config Update (merge with) current system configuration
scp:
startup-config Copy to startup configuration
syslog:
system:
-rw-
1
May 23 2017 06:05:17 +00:00
drwx
4096
Aug 16 2017 19:42:33 +00:00
-rw-
10829893
Aug 23 2017 09:46:23 +00:00
Copy to crashinfo: file system
Copy to flash: file system
Copy to ftp: file system
Copy to http: file system
Copy to https: file system
Copy to null: file system
Copy to nvram: file system
Copy to rcp: file system
Copy to scp: file system
Copy to syslog: file system
Copy to system: file system
System Management Configuration Guide, Cisco IOS XE Gibraltar 16.10.x (Catalyst 9200 Switches)
System Report
.callhome
modules
243
- Quick Links:
- Table of Contents
- Setting the System Clock
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
