hit counter script
Download
Share
Print this page
GE CF-LP Manual
  1. Manuals
  2. Brands
  3. GE Manuals
  4. Transducer
  5. CF-LP
  6. Manual
GE CF-LP Manual

GE CF-LP Manual

Programming the calibration factor for clamp-on transducers
Hide thumbs
1
2
3
4
5

Advertisement

Quick Links

Download this manual
GE
Measurement & Control
Programming the Calibration Factor for CF-LP Clamp-on Transducers
Your CF-LP clamp-on transducers now come with a calibration factor with a calibration certificate. This
calibration factor must be programmed into the meter. If you purchased a meter with the CF-LP transducers, the
calibration factor will already be set and will not need to be programmed in the field.
The calibration factor will appear on the CF-LP transducer mounting rail as seen below:
Programming the Calibration Factor
If you purchased a meter with the CF-LP transducers, the calibration factor will already be set and will not need to
be programmed in the field. For programming, please refer to the specific meter instruction manuals.
The following is a quick step by step procedure based on the specific meter's manual as a reference:
AT868 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 2
DF868 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 3
PT878 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 4
XMT868i. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 5
1100 Technology Park Drive, Billerica, MA 01821, U.S.A.
Telephone: 978-437-1000 or 800-833-9438
Sensing House, Shannon Free Zone East, Shannon, County Clare, Ireland
Telephone: +353 61 470200
916-132A
June 2012
913-332A
June 2006

Advertisement

loading

Related Manuals for GE CF-LP

Summary of Contents for GE CF-LP

  • Page 1 Programming the Calibration Factor If you purchased a meter with the CF-LP transducers, the calibration factor will already be set and will not need to be programmed in the field. For programming, please refer to the specific meter instruction manuals.
  • Page 2 Programming the Calibration Factor for CF-LP Clamp-on Transducers June 2012 AT868 1. Press [ESC], [ENTER], [ESC]. The meter enters the User Program. 2. Press [X] until PROG appears and press [ENTER]. 3. Press [X] until the desired channel appears. Press [ENTER] at CH1 or CH2.
  • Page 3 Programming the Calibration Factor for CF-LP Clamp-on Transducers June 2012 DF868 1. To enter the Channel PROGRAM menu, press [F1] or [F2] (depending on the desired channel) at the User Program prompt. 2. Enter the PIPE submenu by pressing [F3] at the Channel PROGRAM prompt.
  • Page 4 Programming the Calibration Factor for CF-LP Clamp-on Transducers June 2012 PT878 1. Press ESC until you are at the home screen (where pressing ESC no longer changes the screen). 2. Press the Menu key. 3. Using the arrow keys, scroll to Program. Press ENTER.
  • Page 5 Programming the Calibration Factor for CF-LP Clamp-on Transducers June 2012 XMT868i 1. Press [ESC], [ENTER], [ESC]. The meter enters the Keypad Program. 2. Press [X] until PROG appears and press [ENTER]. 3. Press [X] until the desired channel appears. Press [ENTER] at CH1 or CH2.