Page 1
Operating instructions Dishwasher To avoid the risk of accidents or damage to the appliance, it is essential to read these instructions as well as the installation plan before it is installed and used for the first time. en-AU, NZ HG07-W M.-Nr.
Activating the safety lock ..................26 Miele@home ......................27 Standard settings ....................28 Setting the language ..................28 Setting up Miele@home ................. 28 Setting the time of day ................... 29 Setting the water hardness ................29 Activating AutoDos..................30 Dishwasher salt ....................31 Filling the salt reservoir...................
"Installation" and in "Warning and Safety instructions". Miele cannot be held liable for injury or damage caused by non- compliance with these instructions. Keep the installation sheet and the operating instructions in a safe...
Page 8
Warning and Safety instructions Correct application This appliance is designed for domestic use and for use in similar environments by guests in hotel or motel rooms, bed & breakfasts, and other typical living quarters. This does not include common/ shared facilities or commercial facilities within hotels, motels or bed &...
Page 9
Warning and Safety instructions Safety with children Young children must not be allowed to use this appliance. Older children may only use the dishwasher if its operation has been clearly explained to them and they are able to use it safely. They must be able to understand and recognise the possible dangers of misuse.
Page 10
Unauthorised installation, maintenance and repairs can cause considerable danger for the user. Installation, maintenance, and repairs must only be carried out by a Miele authorised technician. Damage to the dishwasher can compromise your safety. Before using the dishwasher and in particular following transport, check it for any visible damage.
Page 11
Warning and Safety instructions Ensure that the connection data on the dishwasher’s data plate (fuse rating, frequency and voltage) match the electricity supply to prevent damage to the dishwasher. Compare these before connecting the appliance to the mains electricity. If in any doubt, consult a qualified electrician.
Page 12
Miele authorised service technician. Defective components must be replaced with original parts. If original Miele parts are installed correctly, Miele ensures full compliance with safety requirements and the warranty remains valid. During installation, maintenance, and repair work, the dishwasher must be disconnected from the electricity supply (switch it off and withdraw the plug from the socket).
Page 13
If the mains connection cable is damaged, it must only be replaced with a specific mains connection cable of the same type (available Miele). For safety reasons, such replacement may only be carried out by a Miele authorised technician or by Miele in order to avoid a hazard. ...
Page 14
The appliance must only be operated with properly adjusted door springs. If the door cannot be adjusted properly, contact Miele customer service. The maximum weight of the front panel that can be aligned with the factory fitted door springs is 10–12 kg (depending on model).
Page 15
Warning and Safety instructions Dishes may be very hot at the end of the programme. Allow the dishes to cool until they are comfortable enough to handle before unloading them. Only use detergent and rinse aid formulated for domestic dishwashers.
Page 16
Please observe the information listed under Technical data regarding the capacity of the dishwasher. Accessories and spare parts Only use original Miele accessories. If other parts are used, warranty, performance, and, if applicable, product liability claims will be invalidated. ...
Notes on the operating instructions Additional information and These operating instructions apply to comments several different dishwasher models of different heights. Additional information and comments The different dishwasher models will be are highlighted in a box framed with a named as follows: thin black line.
Items supplied The following items are supplied: - Dishwasher - Operating instructions for operating the dishwasher - Installation sheet for installing the dishwasher - Other installation accessories for installing the dishwasher (see installation sheet) - Funnel for filling the dishwasher salt - Additional printed matter and add- ons if required...
Guide to the appliance Appliance overview a Door locking pin h Filter combination b Upper spray arm (not visible) i Salt reservoir c 3D MultiFlex cutlery tray (depending j Data plate on model) k Rinse aid reservoir d Upper basket l Detergent compartment e Middle spray arm m AutoDos detergent outlet...
Guide to the appliance Control panel a On/Off sensor d Touch display For switching the dishwasher on and For further information, see “Guide to off. the appliance - Display functions”. b Optical interface e Back sensor For service technicians. For navigating back to the previous menu or deleting values which have c Remote control sensor been set previously.
Guide to the appliance The sensors on the control panel and in Display functions the display react to fingertip contact. The display is used to select or set the following: The touch display can be scratched by pointed or sharp objects, e.g. - the programme pens.
Page 22
Guide to the appliance Examples of how to operate the You can change the order of appliance programmes listed in the Programmes menu by pressing and holding a Main menu programme name and dragging it to the place you want. Use the sensor to switch from the Programmes menu to the main menu.
Page 23
2:03 4:01 Timer To open the pull-down menu, touch the All Miele household appliances that are orange bar at the top edge of the connected to your Wi-Fi network and screen and swipe down with your that have SuperVision display activated finger.
Caring for the environment Disposal of the packing Disposing of your old material appliance The transport and protective packaging Electrical and electronic appliances has been selected from materials which often contain valuable materials. They are environmentally friendly for also contain specific materials, disposal, and can normally be recycled.
Using for the first time At the end of the programme, if the Every dishwasher is tested at the AutoOpen function is on, the door factory. There will be residual water in locking pins automatically retract. the machine from this test. It is not an indication that the dishwasher has To prevent a technical fault, do not been used previously.
Using for the first time Closing the door Activating the safety lock Push the baskets right in. Use the safety lock to prevent children opening the dishwasher door. The door Raise the door upwards until the can then only be opened by using a lot catch engages.
Miele@home availability App. The ability to use the Miele App depends on the availability of the The Miele App will guide you as you Miele@home service in your country. connect your dishwasher to your home Wi-Fi network. The Miele@home service is not Once your dishwasher is connected to available in every country.
The message Set up Miele@home? will Switching on the dishwasher appear in the display. Switch the dishwasher on using the If you want to set up Miele@home sensor. now, select the option. Continue The welcome screen will appear when...
Using for the first time Setting the time of day Setting the water hardness The display will change to the screen The time is updated automatically if a for setting the water hardness. connection is established to the Wi-Fi network. - The dishwasher needs to be programmed to the correct water The display will then change to the...
Using for the first time Activating AutoDos Finally, prompts will appear in the display. The display changes to the settings screen for AutoDos (see “Detergents - After confirming these prompts with Automatic dispensing/AutoDos”). OK, the messages Add salt and run the “QuickPowerWash”...
Using for the first time Dishwasher salt If the water in your area is very soft and constantly lower than 0.9 mmol/l In order to achieve good cleaning (5 °dH - German scale) you do not results, the dishwasher needs to need to add dishwasher salt.
Using for the first time Filling the salt reservoir Before filling the salt reservoir for the first time, you must fill it with approx. 2 litres of water to enable the salt to dissolve. Once the dishwasher has been used, there is always sufficient water in the salt reservoir.
Using for the first time Replenishing salt After the salt reservoir has been filled, the refill reminder may still appear in the When Add salt and run the display if the salt concentration has not “QuickPowerWash” programme with the yet reached the correct level.
Using for the first time Rinse aid If you only ever use combination detergent products in your Rinse aid is necessary to ensure water dishwasher, you do not need to fill does not cling to and leave marks on the rinse aid reservoir. crockery during the drying phase, and it However, the best rinsing and drying helps crockery dry faster after it has...
Using for the first time Wipe up any spilled rinse aid. This Adding rinse aid prevents over-foaming occurring during the next programme. You can adjust the rinse aid dosage for best results (see "Settings - Rinse aid"). Refilling rinse aid When the ...
Settings Changing settings You can alter the dishwasher’s controls to suit changing requirements Select the setting you want to by adjusting the settings. change. Settings can be altered at any time. The selected setting is marked orange. Opening the Settings menu ...
Settings Language Time The display can be set to appear in one The current time of day must be set of several different languages. before you can use the timer option. You can change the language used in Setting the clock format the display and also the country via the You can select either a 24-hour or 12- Language ...
Settings Water hardness AutoDos (automatic dispensing) Your dishwasher is fitted with a water softener. Automatic dispensing automatically adjusts the amount of detergent to the - The dishwasher needs to be selected programme. In the Auto 45– programmed to the correct water 65 °C programme, the quantity is hardness for your area.
- Increase the rinse aid dosage. Additional menu options will be added to the “Settings“ and “Miele@home” If clouding or smearing appears on menus. crockery and glassware: Make sure that your Wi-Fi network - Decrease the rinse aid dosage.
Page 40
Settings Via App Via WPS The Miele App is available to download As an alternative to networking via the free of charge from the Apple App Miele App, you can connect your ® dishwasher to your Wi-Fi network using Store or from the Google Play Store™.
Page 41
menu option option and confirm with OK. Deactivate and confirm with OK. Use the sensors to consecutively In the Miele@home menu, the menu call up the Wi-Fi signal strength, the option Activate will now be displayed name of your router, and the...
Page 42
Settings Set up again Reset network configuration? This menu option only appears if you This menu option only appears if you have already connected your have connected your dishwasher to dishwasher to your Wi-Fi network your Wi-Fi network before. before. You can use this menu option to reset all Wi-Fi module settings to the factory Connecting via the App...
Wi-Fi network using your Even if the Remote control option is dishwasher. switched off, you can use the Miele App to call up information about your SuperVision display appliance. However, you cannot start In order to use your dishwasher as the...
If you do not install an update, you can Appliance search continue to use your dishwasher as If you have connected your Miele usual. However, Miele recommends household appliances to your Wi-Fi installing updates. network via WPS rather than with the...
- Do not switch the dishwasher off automatically. during the update. Otherwise, the update will be aborted and will not be installed. - Some software updates can only be carried out by a Miele service technician.
Settings Setting the electricity tariff times EcoStart Before you can use the EcoStart option, In order to run your dishwasher in the you must set at least one electricity most economical way, you can use the tariff time. EcoStart option to take advantage of your electricity supplier’s cheaper ...
Settings Changing the electricity tariff times Consumption (EcoFeedback) You can change the start, finish, or You can set whether the energy and priority of an electricity tariff time. water consumption is displayed for the selected programme. This function Select an energy tariff time from T1 to shows the estimated consumption T3 that you want to change.
Settings Temperature Volume The temperature can be displayed in A sequence of warning tones will sound °C/Celsius or °F/Fahrenheit. at the end of the programme or if there is a fault, provided that the signal tones The factory default setting is °C/ are activated.
If you only ever use combination is no longer running. detergent products or automatic If you have deactivated the dispensing using Miele PowerDisks (if automatic door opening function but available), you can switch off the refill would still like to open the door at...
Settings BrilliantLight System lock This dishwasher is equipped with wash The system lock prevents your cabinet interior lighting. dishwasher being used without your When the door is open, the lighting knowledge. switches off automatically after If an attempt is made to switch the 15 minutes.
You can view legal information about components are protected by the open source licences for your copyright. The copyright powers of dishwasher. Miele and third parties must be respected. In addition, the appliance contains software components which are distributed under open source licensing terms.
You can reset all dishwasher settings to software/software components are the factory default settings. protected by copyright. The copyright powers of Miele and third parties must The settings of the Wi-Fi module (where be respected. applicable) have to be reset separately (see "Settings –...
Caring for the environment - If you are manually dosing the Economical dishwashing detergent, reduce the amount of This dishwasher is exceptionally detergent by when using powder economical in its use of water and or liquid detergent if the baskets are electricity.
Caring for the environment 2. Displaying consumption EcoFeedback consumption display You can view the actual energy and water consumption in the pull-down In the pull-down menu you can see menu during the programme and at the information about the energy and water end of the programme.
Loading the dishwasher - The spray arms must not be blocked General information by items that are too tall or hang Remove coarse food residues from through the baskets. Test for free crockery. movement by manually rotating the spray arms. There is no need to pre-rinse items under running water.
Page 56
Loading the dishwasher Items not suitable for washing in the Damage due to caustic alkaline dishwasher: detergents. - Wooden cutlery and crockery or Aluminium parts (e.g. the grease items with wooden parts. These may filters of rangehoods) can be discolour and fade.
Loading the dishwasher Loading the FlexCare cup rack Upper basket You can put cups, small bowls, and flat See “Loading the dishwasher - dishes on the FlexCare cup rack. Loading examples” for examples of Glasses can be arranged along the cup how to load crockery and cutlery.
Page 58
Loading the dishwasher Adjusting the FlexCare cup rack Loading the silicone elements of the FlexCare cup rack You can set the height and depth of the cup rack at two different levels so that it The silicone elements on the cup rack can accommodate larger cups and so are specially designed to hold tall that taller items can be placed...
Page 59
Loading the dishwasher Lowering the spikes You can fold down every second spike in the two right hand rows of spikes to make it easier to arrange larger pieces of crockery, e.g. cereal bowls. Press the yellow lever downwards and then lower the dark gray spikes .
Loading the dishwasher To raise the upper basket: Adjusting the upper basket Pull the basket up until it clicks into In order to gain more space for taller place. items, the upper basket can be adjusted on three levels with 2 cm To lower the upper basket: between each level.
Loading the dishwasher Lowering the spikes Lower basket The rows of spikes at the front are used See “Loading the dishwasher - for loading plates, soup bowls, platters, Loading examples” for examples of dessert bowls and saucers. how to load crockery and cutlery. The spikes can be folded down to make Loading the lower basket more room for large items such as pots,...
Page 62
Loading the dishwasher Loading the FlexCare glass holder The MultiClips allow you to fasten light with MultiClips items such as plastic parts onto the glass holder. The silicone elements in the glass holder provide a stable and secure hold for delicate stemware. ...
Page 63
Loading the dishwasher Loading the glassware rail Lowering the bottle holder This rail is designed to hold glasses The bottle holder can be used to keep with long stems securely. narrow items such as milk bottles and baby bottles secure during a programme.
Loading the dishwasher You can push the left insert to the Cutlery tray middle in order to accommodate tall See “Loading the dishwasher - items of crockery and long stemmed Loading examples” for examples of glasses in the upper basket (see “Upper how to load crockery and cutlery.
Comparison tests Test standard: AS/NZS 2007.1:2005, AS/NZS 2007.2:2005; AS/NZS 6400:2005 Standard programme (for energy label): Capacity: 15 place settings Detergent amount: 33.7 g Rinse aid dosage: Setting 3 You can find information on adjusting the rinse aid dosage in the "Rinse aid" section of this booklet.
Detergents There are different types of detergents: Types of detergents - Powder and liquid gel detergents. Damage due to unsuitable These detergents allow you to adjust detergents. the amount dispensed according to Detergents that are not suitable for the size of the load and the level of domestic dishwashers can cause soiling.
Detergents Detergent dispensing Risk of chemical burns from detergent. There are two ways of dispensing the Dishwasher detergents can cause detergent. burning on the skin and in the eyes, During automatic dispensing, the nose, mouth, and throat. AutoDos function will automatically Avoid contact with detergents.
Insert a PowerDisk (see “Automatic dispensing/AutoDos - Inserting a PowerDisks are available to order PowerDisk”). directly from the Miele online store or a Miele Experience Centre. The AutoDos function will be activated automatically. Risk of chemical burns from This setting applies to all programmes residual detergent.
Detergents Inserting a PowerDisk Switch on the dishwasher before you replace the PowerDisk so that the dishwasher recognises it. Only replace the PowerDisk when the message PowerDisk empty. Deactivate appears. AutoDos with OK. If the arrows in the PowerDisk holder and in the viewing window are not pointing towards each other, remove the PowerDisk holder (see “Cleaning...
Page 74
Detergents The detergent powder must be dry so that it does not clump together. Do not fill the AutoDos with any type of liquid. In order to ensure that the AutoDos works at its best, check it each time you replace the PowerDisk and clean it if needed (see “Cleaning and care - Cleaning the AutoDos”).
Detergents Adding detergent Manual detergent dispensing Detergent must be manually dispensed if you have deactivated automatic dispensing in a programme's Extras menu. Detergent dispensing The detergent compartment holds a maximum of 50 ml. There are marks in the detergent compartment to aid with dispensing: 20, 30, max.
Page 76
Detergents The detergent must not cause the detergent compartment lid to get stuck. This can prevent the lid from opening during the programme sequence. Do not overfill the detergent compartment. Automatic dispensing/AutoDos should be deactivated if detergent is manually dispensed. ...
Operation Switching on the dishwasher Selecting a programme Make sure the spray arms can rotate Choose your programme according to freely. the type of crockery and the degree of soiling. Close the door. The different programmes and their use ...
Operation Display of programme duration Starting a programme If necessary, confirm the previously The estimated duration of the selected programme appears in the display displayed message with OK. before the programme starts. During Touch the Start sensor. the programme sequence, the time left until the end of the programme and the The programme starts and the current programme stage are displayed.
Operation At the end of the programme Energy management The signal tones may sound at the end To save energy, the dishwasher will of the programme. switch off automatically 10 minutes after the last time a sensor is pressed or The programme has finished when the after the end of a programme.
Operation Switching off the dishwasher Unloading the dishwasher The dishwasher can be switched off Dishes tend to break and chip more at any time using the sensor. easily when they are hot. Allow the dishes to cool until they are comfortable ...
Operation Interrupting a programme Cancelling or changing a programme A programme will be interrupted as soon as the door is opened. If a programme is cancelled, If the door is closed again, the important programme stages may be programme will continue from the point missed.
Use the safety lock to energy. secure the dishwasher door. To switch the display back on for a few minutes, press the sensor. You can also activate the timer via the Miele App.
Page 83
Options Setting “Start at” Setting EcoStart With the Start at function, you set the EcoStart function enables you to exact time at which you want the benefit from time variable economy programme to start. electricity rates. Before you can use this option, you need to set up to three ...
Page 84
You can also change the time set for Set the time by which the selected the timer or delete it using the programme has to be finished and Miele@mobile App. confirm with OK. The message will Waiting for SmartStart appear in the display.
You can start your dishwasher remotely using the sensor. The option will also using the Miele App. To do this, you first remain active if you switch the need to install the app on your mobile...
Guide for selecting a programme Crockery Food deposits Programme features Temperature-sensitive dishes, Lightly dried-on food deposits Programme with glass care glasses and plastics All fresh to dried-on food Variable, deposits sensor-controlled programme Short programme taking less than an hour Mixed crockery Lightly dried-on food deposits Very quiet programme Standard dried-on normal...
Page 87
Guide for selecting a programme Programme Consumption estimate Energy consumption 20 ml Water consumption Gentle 45 °C Programme duration Energy consumption Auto 45–65 °C 30 ml Water consumption Programme duration Energy consumption 30 ml Water consumption QuickPowerWash 65 °C Programme duration Energy consumption 30 ml Water consumption...
Programme chart Programme Programme sequence Pre-wash Main wash Interim rinse Final rinse Drying °C °C Auto 45–65 °C Variable programme sequence, sensor-controlled adjustment to load size and level of soiling 45–65 55–70 required Gentle 45 °C 55–70 ExtraQuiet 55 °C ...
Page 89
Programme chart Consumption Electricity Water Time Cold water Hot water Litres Cold water Hot water 15 °C 60 °C 15 °C 60 °C h:min h:min 0.54 0.36 3:45 3:42 2:05–3:35 1:57–3:21 0.75–1.05 0.45–0.55 6.0–13.0 0.90 0.40 13.0 2:44 2:28 0.95 0.60 3:59 3:50 1.20 0.75 10.5 0:58...
Programme chart Glasses Further programmes This programme does not use rinse aid PowerWash 60 °C and omits the drying phase. It is Programme for cleaning a mixed load particularly suitable for cleaning beer with fresh food deposits which have glasses where a good head of froth is begun to dry on.
Extras If you want to cancel the selection of Selecting Extras an Extra, touch the sensor for the You can use Extras to adjust the Extra again. programmes. When you have selected all the To do this, you can select or deselect settings you want, press the the Extras in the Extras menu of a Start sensor to start the programme.
Page 92
Extras Express Extra clean The Express Extra reduces the You can select this Extra to increase the programme duration. cleaning performance of the programmes. In order to achieve optimum cleaning results, the temperature, and therefore If you activate this Extra, the the energy consumption, will increase programme duration and the main wash with this option.
(see “Optional accessories – Maintenance”). Follow the instructions on the product packaging. Miele cleaning and care products are available to order from Miele Service or from Miele’s online store. Clean the filters in the wash cabinet regularly.
After cleaning, wipe the front dry using a soft cloth. A clean, damp microfibre cloth (such as the Original Miele all purpose microfibre cloth) without detergent can also be used.
Cleaning and care Slide the yellow catch of the AutoDos Cleaning the AutoDos lid to and open it. You should check that the detergent Remove the PowerDisk if applicable. fill channel is clean every time you replace the PowerDisk, and clean it if necessary, e.g.
Page 96
Cleaning and care Clean the fill channel with water and a The AutoDos lid must close tightly so soft brush if necessary. that the detergent powder does not get wet and clump together. It is very important that no moisture Make sure that all seals are clean.
Cleaning and care Removing the cutlery tray (if present) Cleaning the spray arms In order to be able to remove the upper Particles of food can get stuck in the spray arm, you first have to remove the spray arm jets and bearings. The spray cutlery tray (if present).
Page 98
Cleaning and care Removing the upper spray arm Removing the lower spray arm Remove the lower basket. Push the upper spray arm upwards to engage the inner ratchet. Then Rotate the screw thread of the lower unscrew the spray arm by rotating the spray arm anti-clockwise ...
Page 99
Cleaning and care Refitting the spray arms Inserting the cutlery tray (if present) Reinstall the upper spray arm and Slide the cutlery tray back onto the tighten it by hand. rails from the front. Reinstall the middle spray arm. ...
Cleaning and care Checking the filters in the Cleaning the filters wash cabinet Switch the dishwasher off. The filter combination in the base of the Remove the lower spray arm (see wash cabinet retains coarse soiling “Cleaning and care - Cleaning the from the suds solution.
Page 101
Cleaning and care In order to clean the inside of the Rotate the screw thread clockwise filter, pull the microfilter downwards until the arrow in the viewing window and away from the filter combination. points to the lock symbol . ...
Cleaning and care Cleaning the water inlet filter A filter is incorporated in the screw thread to protect the water inlet valve. If the filter is soiled, insufficient water flows into the wash cabinet. Risk of electric shock. The plastic housing of the water connection contains an electrical valve.
Cleaning and care Cleaning the drain pump If water remains in the wash cabinet after the end of a programme, the water has not been pumped away. The drain pump may be blocked by foreign objects. These foreign objects are easy to remove.
Page 104
Cleaning and care Damage caused by incorrect cleaning. The components are delicate and can be damaged during cleaning. Take care when cleaning the drain pump. The drain pump (see arrow) is underneath the cover. Risk of injury from glass splinters.
With the help of the following guide, minor faults in the performance of the appliance, some of which may result from incorrect operation, can be remedied without contacting Miele. This will save you time and money because you won't need a service call.
Switch Switch the dishwasher off. off the appliance, turn off the Switch the dishwasher back on. tap and call Miele Service. Restart the desired programme. If the fault message appears again, there is a technical fault.
– Opening the door”) and switch the for further details. dishwasher back on. If the same fault message appears again, call Miele. The door does not close automatically. The door might be obstructed by an item inside the appliance.
Switch Switch the dishwasher off. off the appliance, turn off the Turn off the tap. tap and call Miele Service. Call Miele. The following fault The intake water has not reached the required message appears in the temperature of 45 °C (see “Installation –...
Problem solving guide Water drainage fault Problem Possible cause and remedy The alarm tone is Before rectifying the problem, you must: sounding. Switch the dishwasher off. The message Water drainage fault. Water was not pumped There might be water in the wash cabinet. away.
Inserting a PowerDisk”). The following message If the same fault message appears again, call appears in the display: Miele. AutoDos lid open The following message The AutoDos function is active and the PowerDisk is appears in the display: empty.
Page 111
Restart the technical fault. You can continue to use your programme. If the fault dishwasher by deactivating automatic dispensing in occurs again, call Miele the Extras menu of a programme and manually Service. dispensing the detergent via the detergent compartment.
Problem solving guide Spray arm fault Problem Possible cause and remedy During the programme The lower spray arm is blocked or the jets of the and at the end of the lower spray arm are clogged. The AutoDos function programme, the display is automatically deactivated during the programme shows the following sequence because the AutoDos detergent outlet...
Switch the lighting back on (see “Settings - opened. BrilliantLight”). The wash cabinet lighting is faulty. Call Miele. Detergent residue is left The detergent compartment was still damp when in the detergent detergent was added.
Problem solving guide Noises Problem Possible cause and remedy Knocking noise in the A spray arm is knocking against a crockery piece. wash cabinet. Carefully open the door and rearrange the wash items that are obstructing the spray arm. Rattling noise in the Items of crockery are not secure in the wash cabinet.
Problem solving guide Unsatisfactory cleaning result Problem Possible cause and remedy The dishes are not The items were not loaded correctly. clean. See notes under “Loading the dishwasher”. The programme was not thorough enough. Select a more intensive programme (see “Programme chart”).
Page 116
Problem solving guide Problem Possible cause and remedy Dishes are not dry or The amount of rinse aid may be insufficient, or the cutlery and glasses are rinse aid reservoir is empty. blotchy. Replenish the rinse aid, increase the dosage, or change the brand of rinse aid (see “Using for the first time - Rinse aid”).
Page 117
Problem solving guide Problem Possible cause and remedy White residue is visible Not enough rinse aid was added. on the dishware. Increase the dosage (see “Settings – Rinse aid”). Clouding has occurred The salt reservoir is empty. on glassware and ...
Page 118
Problem solving guide Problem Possible cause and remedy There are rust stains on The affected items are not corrosion resistant. cutlery. There is no remedy. Purchase cutlery which is dishwasher safe. A programme was not run after dishwasher salt was added.
2 years. Miele. For further information, please refer to your warranty booklet. You can book a Miele customer service call-out online at www.miele.com.au/service or www.miele.co.nz/service. Contact information for Miele can be found at the end of this booklet.
Miele appliances. glass protective additives These and many other useful products - phosphate-free – environmentally can be ordered from the Miele online friendly store or a Miele Experience Centre. - water-soluble wrapping – no need to Detergents...
Page 121
Optional accessories Appliance care Miele cleaning and care products provide optimum care for your dishwasher. IntenseClean - for use with the Maintenance programme programme (depending on model) without detergent dispensing - cleans the dishwasher effectively and thoroughly - removes grease, bacteria and...
(up to max. 60 °C). Provided that your dishwasher has If energy-saving water heating sources, been installed correctly, the Miele such as a solar water heating system, Waterproof system will protect you from are used, we recommend connecting to water damage throughout its lifetime.
Page 123
*INSTALLATION* Installation A tap with a ¾" male thread must be Risk of damage due to excessive provided on site. If this type of tap is pressure. not available, only a qualified plumber A brief increase in the water pressure may connect the dishwasher to the can damage components of the household water supply.
*INSTALLATION* Installation Drainage Lay the drain hose so that it does not kink and is not being subjected to The appliance drainage system is fitted pressure or being tugged. with a non-return valve, which prevents dirty water from flowing back into the ...
Page 125
*INSTALLATION* Installation Venting the water drainage If the on-site drainage connection is situated lower than the guide for the rollers of the lower basket in the door, the drainage system must be vented. Otherwise, a siphoning effect during a programme can cause the appliance to empty itself of water.
The dishwasher is supplied with a a specific mains connection cable of mains cable with moulded plug ready the same type (available Miele). For for connection to an earthed socket. safety reasons, such replacement may only be carried out by a suitably...
Technical data Technical data Dishwasher model Normal Height of freestanding 84.5 cm appliance (adjustable by +3.5 cm) Height of built-in appliance 80.5 cm 84.5 cm (adjustable by (adjustable by +6.5 cm) +6.5 cm) Niche height min. 80.5 cm (+6.5 cm) min. 84.5 cm (+6.5 cm) Width 59.8 cm 59.8 cm Niche width 60 cm 60 cm Depth of freestanding...
Page 131
183 Featherston Street Miele Experience Centre South Melbourne: Wellington 6011 206-210 Coventry Street South Melbourne, VIC 3205 0800 464 353 (0800 4 MIELE) Miele Experience Centre and Office Sydney: www.miele.co.nz 3 Skyline Place Frenchs Forest, NSW 2086 Miele Experience Centre and Office Brisbane:...