Page 2
VersiCharge™ AC Electric vehicle charging station Index Installation kit Bracket Mounting Charger Mounting Outlet Installation Maintenance General exterior maintenance General external checks APPENDIX A – Human Machine Interface (HMI) APPENDIX B – System Operation/Faults APPENDIX C – Useful Links APPENDIX D– Hardwire Bending Diagram Dedicated...
VersiCharge™ AC Electric vehicle charging station Figures Figure 1. Bracket Position Figure 2. Wall Mounting Figure 3. Alternate Bracket Mounting Wallboard Installation Figure 4. Hanging Charger Figure 5. Set Amp Switch Figure 6. Charger Hardwiring and Ferrite Core Installation. Figure 7. SIM Card Installation Figure 8.
Page 4
VersiCharge™ AC Electric vehicle charging station Installation kit Equipment List Standard Installation – What you will need: Certified Electrician (Recommended) Cordless Drill (Phillips Bit with extender) Stud Finder Level – include 1/8” drill bit for pilot holes 240 V AC Voltmeter NEMA 6-50 Outlet (Only used for the 7/16”...
Page 5
Admin Card User Card User Card NOTE: Supplied with Commercial units only. For RFID setup, see RFID Setup in the complete VersiCharge Installation and Operations Manual at: usa.siemens.com/versicharge. 1 – Mounting Bracket 1 – Cable Holster 2 – Admin Cards 5 –...
VersiCharge™ AC Electric vehicle charging station Steps 5 through 9 are only applicable to specific models/features. Match the charger feature to the installation step. Steps 10 through 12 are applicable to ALL chargers. STEP 5 STEP 6 STEP 7 Figure 7. SIM Card Installation Figure 8.
VersiCharge™ AC Electric vehicle charging station STEP 10 STEP 11 STEP 12 Figure 13. Close Charger Figure 15. Holster Installation Figure 14. Secure Charger (Commercial/Residential - See page 13) (Commercial/Residential - See page 13) (Commercial/Residential - See page 13)
Page 9
Using a 7/16” socket, attach mounting bracket to wall in compliance with all National Electrical Code® (NEC) and local jurisdiction requirements, using the (2) ¼” x 2” lag screws provided. For Siemens Post installation see the post instruction manual at: usa.siemens.com/versicharge...
Page 10
VersiCharge™ AC Electric vehicle charging station STEP 4 Hardwire the VersiCharge will need to be mounted on the bracket to hardwire the device. VersiCharge and Plug-supplied units only: Ferrite core installation - skip if 1. Open the VersiCharge to expose backside of the unit. using an existing 2.
Page 11
OFF position for a Child unit, unless that Child is the last Child in the daisy chain, then it must be ON. - Commercial Units NOTE: For more detail on the ModBus and the Termination Switch position settings, refer to the complete VersiCharge AC Only (Figure 10) Series Installation and Operations Manual and the VersiCharge ModBus Manual at usa.siemens.com/versicharge.
Page 12
VersiCharge™ AC Electric vehicle charging station STEP 9 Connect External The Siemens VersiCharge has a Remote Control Interface that allows charging to be controlled by an external device. Remote Control Examples include demand response switches, building automation systems, digital sensors, etc.
Page 13
VersiCharge™ AC Electric vehicle charging station Maintenance While there is no maintenance for the internal works of the VersiCharge, the exterior does require some basic, common sense maintenance. The following maintenance can be performed by the owner/user. All other service must be conducted by qualified personnel.
VersiCharge™ AC Electric vehicle charging station APPENDIX A – Human Machine Interface (HMI) 5 13 Visual HMI Elements 1. Status LED - Power On 2. Status LED - Car Connected, Cold Start 3. Status LED - Charging 4. Status LED - Fault 5.
Page 15
VersiCharge™ AC Electric vehicle charging station APPENDIX B – System Operation/Faults Operating and Fault Light States After a Charger has been Added Display Description Action Normal Operation Charger is locked. Pass RFID card in front of reader to unlock and begin charging.
Page 16
VersiCharge™ AC Electric vehicle charging station Display Description Action Normal Operation Charger is connected to router. Strong Wi-Fi. Lights up green Attempting to connect to VersiCloud Flashes blue Ready (with successful connection and registration in VersiCloud) Lights up white Access blocked Unlock via RFID/ OCPP/MODBUS /Mobile App 2 h delay Wait until charging process starts.
Page 17
VersiCharge™ AC Electric vehicle charging station Display Description Action Fault Status Press the Touch button for 5 seconds Power presetting is set to the maximum for the for maximum charging power charging process. Press once for ground fault reset. A fault has occurred. The device is in a fault state.
Page 18
VersiCharge™ AC Electric vehicle charging station Display Description Action Fault Status A fault has occurred. Error code: 006. Notify Technical Support. Lights up red A fault has occurred. Error code: 007. Notify Technical Support. Lights up red A fault has occurred. Error code: 008.
Page 19
- Detailed VersiCharge Installation and Operating Manual, as well as all legal and warranty information. - VersiCharge AC Series ModBus Manual - VersiCharge AC Series Post Installation Manual UL - Open Source Report: Product Clearing report for 3rd party SW components...
Page 20
VersiCharge™ AC Electric vehicle charging station APPENDIX D– Hardwire Bending Diagram VersiCharge Hardwired Models Dedicated 2 Pole 50/60 amp commom trip branch circuit breaker NOTE: The rating of the circuit breaker that will be required is based on the ampere rating of the EVSE; 40A requires 50A breaker, 48A requires 60A breaker.
Page 21
VersiCharge™ AC Electric vehicle charging station Notes:...
Page 22
VersiCharge™ AC Electric vehicle charging station Notes:...
Page 23
VersiCharge™ AC Electric vehicle charging station Notes:...
Page 24
This document contains a general description of available technical options only, and its effectiveness will be subject to specific variables Siemens Industry, Inc. including field conditions and project parameters. Siemens does not 3617 Parkway Ln. make representations, warranties, or assurances as to the accuracy or Peachtree Corners, GA 30092 completeness of the content contained herein.