Canon WUX5000 User Commands
Hide thumbs
Also See for WUX5000:
- User's manual & installation manual (240 pages) ,
- Specifications (2 pages) ,
- User and installation manual (240 pages)
Related Manuals for Canon WUX5000
Summary of Contents for Canon WUX5000
- Page 1 MULTIMEDIA PROJECTOR WUX5000 / WUX4000 User Commands Revision 1 © 2011 CANON INC. YT1-1435-001...
-
Page 2: Table Of Contents
WUX5000 / WUX4000 User Commands Table of Contents 1. Overview ......................... 1 2. Communication Specifications ................. 2 Communication Specifications ........................2 Usable Character Codes ..........................3 Communication System (Serial) ......................... 4 Communication System (LAN) ........................4 Commands ..............................5 Response ..............................6 Other ................................ - Page 3 WUX5000 / WUX4000 User Commands FREEZE ............................ 36 GAMMA ............................ 37 HDMI_IN ..........................38 HDMI_OVSCAN ........................39 HUE ............................40 IMAGE ............................41 IMAGEFLIP ..........................43 INPUT ............................44 LAMP ............................45 LAMPCOUNTER ........................46 MAIN ............................47 MEMCADJ ..........................48 MODE ............................
-
Page 4: Overview
WUX5000 / WUX4000 User Commands 1. Overview These specifications describe the methods of controlling both the Projector WUX5000 and WUX4000 from the PC over an RS-232C connection or LAN. Virtually all operations possible with the remote control can be controlled from the PC. -
Page 5: Communication Specifications
WUX5000 / WUX4000 User Commands 2. Communication Specifications Communication Specifications The projector can be controlled via RS-232C or LAN connection. PC - Projector connection configuration Dedicated cable LAN PORT SERVICE Network LAN PORT PROJECTOR Item Specifications Item Specifications Connection... -
Page 6: Usable Character Codes
WUX5000 / WUX4000 User Commands Usable Character Codes Use ASCII codes in the red and blue areas. No distinction is made between double-byte characters and single-byte characters. Do not use double-byte or triple-byte characters. They will all be recognized as single-byte characters. -
Page 7: Communication System (Serial)
WUX5000 / WUX4000 User Commands Communication System (Serial) Item Specifications Communication system RS-232-C Start-stop synchronization Semi-duplex communication Transmission speed 19.2 Kbps Character length 8 bits / character Stop bit 2 bits Parity None Transmission format Variable-length records with terminals as delimiters Maximum transmission Maximum of 256 characters (bytes) including delimiters. -
Page 8: Commands
WUX5000 / WUX4000 User Commands Commands Transmissions sent from the PC to the projector. Transmission format △<Command character strings> △<Delimiter> <Command character strings> Character strings consisting of 0 or more alphanumeric characters. <Delimiters> One of CR (0Dh), LF (0Ah), CR+LF (0Dh+0Ah), Null (00h) Type Possibilities of responses from the projector ■: possible, □: not possible... -
Page 9: Response
WUX5000 / WUX4000 User Commands Response Transmissions sent from the Projector to the PC in response to commands from the PC. Transmission format <Response character string> <Delimiter> <Response character string> Character strings consisting of one or more ASCII characters. The first two characters are always one lowercase letter and a : (colon). -
Page 10: Other
WUX5000 / WUX4000 User Commands Other Transmission recognition On the receiving side (the Projector), the data that is able to be received within the character interval of Tc is held, and the transmission is considered received when the delimiter is received. -
Page 11: Communication Flow
WUX5000 / WUX4000 User Commands 3. Communication Flow Transmission sent At the PC, the transmission is sent within character intervals of Tc (character interval timeout). Transmission received At the Projector, the data that is able to be received within the character interval of Tc is held, and the transmission is considered received when the delimiter is received. -
Page 12: Command System
WUX5000 / WUX4000 User Commands 4. Command System - 9 -... - Page 13 WUX5000 / WUX4000 User Commands - 10 -...
-
Page 14: Command List
WUX5000 / WUX4000 User Commands 5. Command List Item Commands Description 6AXADJ 6-axis adjustment ON / OFF 6AXR-Y 6-axis correction R-Y hue / saturation settings AMBADJ Ambient light correction adjustment ON / OFF AMBLEVEL Ambient light level settings AMBTYPE Ambient light type settings... - Page 15 WUX5000 / WUX4000 User Commands Item Commands Description Noise reduction POWER This controls the power supply PRODCODE Product information inquiry Remote control operation emulate RGBGAIN RGB gain adjustment RGBOFFSET RGB offset adjustment ROMVER ROM version inquiry Color saturation setting SAVEIMGPROF...
-
Page 16: Details Of Commands
WUX5000 / WUX4000 User Commands 6. Details of Commands Descriptions of each command are provided starting from the next page. The command descriptions have the format shown below. Alphabetic command name This briefly describes the command function. Format This indicates the command format. -
Page 17: 6Axadj
WUX5000 / WUX4000 User Commands 6AXADJ 6-axis adjustment ON / OFF Format 6AXADJ=<6-axis adjustment parameter ID> GET□6AXADJ ?△6AXADJ <6-axis adjustment parameter:ID> This sets the 6-axis adjustment to ON. This sets the 6-axis adjustment to OFF. Environment Power Input D-RGB A-RGB... -
Page 18: 6Axr-Y
WUX5000 / WUX4000 User Commands 6AXR-Y 6-axis correction R-Y hue / saturation settings Format 6AXR=<R hue:Number>▽<R saturation:Number>▽<R brightness:Number> 6AXG=<G hue:Number>▽<G saturation:Number>▽<G brightness:Number> 6AXB=<B hue:Number>▽<B saturation:Number>▽<B brightness:Number> 6AXC=<C hue:Number>▽<C saturation:Number>▽<C brightness:Number> 6AXM=<M hue:Number>▽<M saturation:Number>▽<M brightness:Number> 6AXY=<Y hue:Number>▽<Y saturation:Number>▽<Y brightness:Number> GET□6AXR ?△6AXR GET□6AXG... -
Page 19: Ambadj
WUX5000 / WUX4000 User Commands AMBADJ Ambient light correction adjustment ON / OFF Format AMBADJ=<Ambient light correction adjustment parameter:ID> GET□AMBADJ ?△AMBADJ <Ambient light correction adjustment parameter:ID> This sets the ambient light correction adjustment to ON. This sets the ambient light correction adjustment to OFF. -
Page 20: Amblevel
WUX5000 / WUX4000 User Commands AMBLEVEL Ambient light level settings Format AMBLEVEL=<Ambient light level settings parameter:ID> GET□AMBLEVEL ?△AMBLEVEL <Ambient light level settings parameter:ID> WEAK This sets the ambient light level to WEAK. MIDDLE This sets the ambient light level to MIDDLE. -
Page 21: Ambtype
WUX5000 / WUX4000 User Commands AMBTYPE Ambient light type settings Format AMBTYPE=<Ambient light type settings parameter:ID> GET□AMBTYPE ?△AMBTYPE <Ambient light type settings parameter:ID> This sets the ambient light type to Tungsten. This sets the ambient light type to Fluorescent. FL_H This sets the ambient light type to Fluorescent H. -
Page 22: Aspect
WUX5000 / WUX4000 User Commands ASPECT Screen settings Format ASPECT=<Screen setting parameters:ID> GET□ASPECT ?△ASPECT <Screen setting parameters:ID> AUTO Auto 16:9 16:9 ZOOM Zoom TRUE Real FULL Full screen Environment Power Input Parameter D-RGB A-RGB HDMI None ○ ○ ○ AUTO ○... - Page 23 WUX5000 / WUX4000 User Commands Example Setting This sets the screen size to 16:9. > ASPECT=16:9 < i:OK Reference This retrieves the screen size. > GET ASPECT or ?ASPECT < g:ASPECT=TRUE * Commands are indicated by ">", and responses are indicated by "<".
-
Page 24: Autopc
WUX5000 / WUX4000 User Commands AUTOPC Auto PC Format AUTOPC△ Environment Power Input D-RGB A-RGB COMP HDMI None Response "i:OK" is returned if the control was executed properly. For details on other responses, refer to the "Error List". Description This executes Auto PC. -
Page 25: Autosetexe
WUX5000 / WUX4000 User Commands AUTOSETEXE Auto setup Format AUTOSETEXE□<Auto set parameter:ID> <Auto set parameter:ID> INPUT Automatic signal sensing execution Environment Power Input D-RGB A-RGB COMP HDMI None Response “i:OK” is returned when the automatic processing was completed successfully. For details on other responses, refer to the "Error List". -
Page 26: Avol
WUX5000 / WUX4000 User Commands AVOL Audio volume adjustment Format AVOL=<Audio volume level:Number> GET□AVOL ?△AVOL Setting values for <Audio volume level:Number> are 0 to 20. Environment Power Input D-RGB A-RGB COMP HDMI None Response "i:OK" is returned if the parameter was set properly. -
Page 27: Blank
WUX5000 / WUX4000 User Commands BLANK BLANK function Format BLANK=<BLANK parameter:ID> GET□BLANK ?△BLANK <BLANK parameter:ID> BLANK ON BLANK OFF Environment Power Input D-RGB A-RGB COMP HDMI None Response "i:OK" is returned if the parameter was set properly. For ' ' or '... -
Page 28: Bri
WUX5000 / WUX4000 User Commands Brightness setting Format BRI=<Brightness setting:Number> GET□BRI ?△BRI Setting values for <Brightness setting:Number> are -20 to 20. Environment Power Input D-RGB A-RGB COMP HDMI None Response "i:OK" is returned if the parameter was set properly. For '... -
Page 29: Color_Temp
WUX5000 / WUX4000 User Commands COLOR_TEMP Color temperature setting Format COLOR_TEMP=<Color temperature setting:Number> GET□COLOR_TEMP ?△COLOR_TEMP Setting values for <Color temperature setting:Number> are -17 to 21. Environment Power Input D-RGB A-RGB COMP HDMI None Response "i:OK" is returned if color temperature was set properly. -
Page 30: Comver
WUX5000 / WUX4000 User Commands COMVER User command version inquiry Format GET□COMVER ?△COMVER Environment Power Input D-RGB A-RGB COMP HDMI None Response Returns the user command version as g:COMVER="<User command version:Character string>" For details on other responses, refer to the "Error List". -
Page 31: Cont
WUX5000 / WUX4000 User Commands CONT Contrast setting Format CONT=<Contrast setting:Number> GET□CONT ?△CONT Setting values for <Contrast setting:Number> are -20 to 20. Environment Power Input D-RGB A-RGB COMP HDMI None Response "i:OK" is returned if the parameter was set properly. -
Page 32: Dgamma
WUX5000 / WUX4000 User Commands DGAMMA Dynamic gamma Format DGAMMA=<Dynamic gamma setting parameter:ID> GET□DGAMMA ?△DGAMMA <Dynamic gamma setting parameter:ID> WEAK Weak MIDDLE Middle STRONG Strong Environment Power Input D-RGB A-RGB COMP HDMI None Response "i:OK" is returned if the parameter was set properly. -
Page 33: Dzoom_Pos
WUX5000 / WUX4000 User Commands DZOOM_POS DZOOM position setting Format DZOOM_POS=<DZOOM position X:Number>,<DZOOM position Y:Number> GET□DZOOM_POS ?△DZOOM_POS <DZOOM position X / Y:Number> is a signed integer indicating the central position of the enlarged input image. Environment Power Input D-RGB A-RGB... -
Page 34: Dzoom_Rat
WUX5000 / WUX4000 User Commands DZOOM_RAT DZOOM ratio setting Format DZOOM_RAT=<DZOOM ratio parameter:ID> GET□DZOOM_RAT ?△DZOOM_RAT <DZOOM ratio parameter:ID> same size (DZOOM disabled) 1.5x Environment Power Input D-RGB A-RGB COMP HDMI None Response "i:OK" is returned if DZOOM ratio was set properly. -
Page 35: Err
WUX5000 / WUX4000 User Commands Error information inquiry Format GET□ERR ?△ERR Environment Power Input D-RGB A-RGB COMP HDMI None Response Returns the current error information as 'g:ERR=<ErrorID:Character string>' For details on other responses, refer to the "Error List". <ErrorID:Character string>... -
Page 36: Fine_Gamma_R
WUX5000 / WUX4000 User Commands FINE_GAMMA_R Fine gamma (R) adjustment Format FINE_GAMMA_R=<Fine gamma (R) adjustment point 1 adjustment value:Number>, <Fine gamma (R) adjustment point 2 adjustment value:Number>, ・・・,<Fine gamma (R) adjustment point n adjustment value:Number> GET□FINE_GAMMA_R ?△FINE_GAMMA_R Adjustment values for <Fine gamma (R) adjustment point n adjustment value:Number> are 0 to 1024. -
Page 37: Fine_Gamma_G
WUX5000 / WUX4000 User Commands FINE_GAMMA_G Fine gamma (G) adjustment Format FINE_GAMMA_G=<Fine gamma (G) adjustment point 1 adjustment value:Number>, <Fine gamma (G) adjustment point 2 adjustment value:Number>, ・・・,<Fine gamma (G) adjustment point n adjustment value:Number> GET□FINE_GAMMA_G ?△FINE_GAMMA_G Adjustment values for <Fine gamma (G) adjustment point n adjustment value:Number> are 0 to 1024. -
Page 38: Fine_Gamma_B
WUX5000 / WUX4000 User Commands FINE_GAMMA_B Fine gamma (B) adjustment Format FINE_GAMMA_B=<Fine gamma (B) adjustment point 1 adjustment value:Number>, <Fine gamma (B) adjustment point 2 adjustment value:Number>, ・・・,<Fine gamma (B) adjustment point n adjustment value:Number> GET□FINE_GAMMA_B ?△FINE_GAMMA_B Adjustment values for <Fine gamma (B) adjustment point n adjustment value:Number> are 0 to 1024. -
Page 39: Freeze
WUX5000 / WUX4000 User Commands FREEZE Freeze status Format FREEZE=<FREEZE parameter:ID> GET□FREEZE ?△FREEZE <FREEZE parameter:ID> Image now frozen Image now not frozen Environment Power Input D-RGB A-RGB COMP HDMI None Response "i:OK" is returned if the parameter was set properly. -
Page 40: Gamma
WUX5000 / WUX4000 User Commands GAMMA Gamma adjustment Format GAMMA=<Gamma adjustment:Number> GET□GAMMA ?△GAMMA Setting values for <Gamma adjustment: Number> are -10 to 10. Environment Power Input D-RGB A-RGB COMP HDMI None Response "i:OK" is returned if the parameter was set properly. -
Page 41: Hdmi_In
WUX5000 / WUX4000 User Commands HDMI_IN HDMI input setting Format HDMI_IN=<HDMI input setting parameter:ID> GET□HDMI_IN ?△HDMI_IN <HDMI input setting parameter:ID> AUTO Select this when connecting to an AV equipment. Image processing and menu displays are adjusted respective to the connected video equipment. -
Page 42: Hdmi_Ovscan
WUX5000 / WUX4000 User Commands HDMI_OVSCAN HDMI overscan setting Format HDMI_OVSCAN=<HDMI overscan setting parameter:ID> GET□HDMI_OVSCAN ?△HDMI_OVSCAN <HDMI overscan setting parameter:ID> Turns overscan to OFF Turns overscan to ON Environment Power Input D-RGB A-RGB COMP HDMI None Response "i:OK" is returned if HDMI overscan was set properly. -
Page 43: Hue
WUX5000 / WUX4000 User Commands Hue setting Format HUE=<Hue setting value:Number> GET□HUE ?△HUE Setting values for <Hue setting value:Number> are -20 to 20. Environment Power Input D-RGB A-RGB COMP HDMI None Response "i:OK" is returned if the parameter was set properly. -
Page 44: Image
WUX5000 / WUX4000 User Commands IMAGE Image mode setting Format IMAGE=<Image mode setting parameter:ID> GET□IMAGE ?△IMAGE <Image mode setting parameter:ID> STANDARD Standard PRESENTATION Presentation VIVID_PHOTO Vivid photo PHOTO_SRGB Photo / sRGB DCM_SIM DICOM Sim* DYNAMIC Dynamic VIDEO Video CINEMA Cinema... - Page 45 WUX5000 / WUX4000 User Commands Setting Commands related to the settings 6-axis adjustment 6AXADJ 6-axis color correction 6AXR〜Y The current image quality can be acquired using the applicable GET command. (" ") GET IMAGE Example Setting This sets the image mode to "Presentation".
-
Page 46: Imageflip
WUX5000 / WUX4000 User Commands IMAGEFLIP Flip display Format IMAGEFLIP=<Image flip setting parameters:ID> GET□IMAGEFLIP ?△IMAGEFLIP <Image flip setting parameters:ID> NONE None CEILING Ceiling REAR Rear projection REAR_CEILING Rear projection with ceiling Environment Power Input D-RGB A-RGB COMP HDMI None Response "i:OK"... -
Page 47: Input
WUX5000 / WUX4000 User Commands INPUT Input selection Format INPUT=<Input selection parameters:ID> GET□INPUT ?△INPUT <Input selection parameters:ID> D-RGB Digital PC A-RGB Analog PC COMP Component HDMI HDMI Environment Power Input D-RGB A-RGB COMP HDMI None Response "i:OK" is returned if the parameter was set properly. -
Page 48: Lamp
WUX5000 / WUX4000 User Commands LAMP Lamp output setting Format LAMP=<Lamp output setting parameters:ID> GET□LAMP ?△LAMP <Lamp output setting parameters:ID> NORMAL Normal SILENT Silent cooling Environment Power Input D-RGB A-RGB COMP HDMI None Response "i:OK" is returned if the parameter was set properly. -
Page 49: Lampcounter
WUX5000 / WUX4000 User Commands LAMPCOUNTER Lamp ON time inquiry Format GET□LAMPCOUNTER ?△LAMPCOUNTER Environment Power Input D-RGB A-RGB COMP HDMI None Response Returns current lamp on time as g:LAMPCOUNTER="<Lamp ON time:Character string>" For details on other responses, refer to the "Error List". -
Page 50: Main
WUX5000 / WUX4000 User Commands MAIN Front panel operation emulation Format MAIN□<Main unit panel emulation button parameters:ID> <Main unit panel emulation button parameters:ID> POWER POWER button POWER_OFF POWER button pressed twice MENU MENU LENS LENS INPUT INPUT UP+REP Hold down the UP button... -
Page 51: Memcadj
WUX5000 / WUX4000 User Commands MEMCADJ Memory color adjustment Format MEMCADJ=<Memory color adjustment parameter:ID> GET□MEMCADJ ?△MEMCADJ <Memory color adjustment parameter:ID> No adjustment MEM_L Memory color adjustment - light MEM_M Memory color adjustment - medium MEM_H Memory color adjustment - heavy... -
Page 52: Mode
WUX5000 / WUX4000 User Commands MODE Control mode switch Format REMOTE LOCAL GET□MODE ?△MODE Environment Power Input D-RGB A-RGB COMP HDMI None Response "i:OK" is always returned with the control mode switch setting. For ' ' or ' ', current control mode is returned as... -
Page 53: Mute
WUX5000 / WUX4000 User Commands MUTE Mute control Format MUTE=<Mute control parameter: ID> GET□MUTE ?△MUTE <Mute control parameter: ID> This prohibits the audio / beep sound. This permits the audio / beep sound. Environment Power Input D-RGB A-RGB COMP HDMI... - Page 54 WUX5000 / WUX4000 User Commands Noise reduction Format NR=<Noise reduction setting parameter:ID> GET□NR ?△NR <Noise reduction setting parameter:ID> WEAK Weak MIDDLE Middle STRONG Strong Environment Power Input D-RGB A-RGB COMP HDMI None Response "i:OK" is returned if noise reduction was set properly.
-
Page 55: Power
WUX5000 / WUX4000 User Commands POWER This controls the power supply Format POWER□<Parameter:ID> GET□POWER ?△POWER <Parameter:ID> Power ON Power OFF Environment Power Input D-RGB A-RGB COMP HDMI None Response "i:OK" is returned if the parameter was set properly. For ' ' or ' ', current power supply status is returned as shown in the table below. -
Page 56: Prodcode
WUX5000 / WUX4000 User Commands PRODCODE Product information inquiry Format GET□PRODCODE ?△PRODCODE Environment Power Input D-RGB A-RGB COMP HDMI None Response Product name is returned as g:PRODCODE="<Product name:Character string>" For details on other responses, refer to the "Error List". <Product name:Character string>... - Page 57 WUX5000 / WUX4000 User Commands Remote control operation emulate Format RC□<Remote control emulation button parameters:ID> <Remote control emulation button parameters:ID> POWER POWER button POWER_OFF POWER button pressed twice MENU MENU INPUT INPUT ASPECT ASPECT AUTOPC AUTOPC KEYSTONE KEYSTONE UP+REP Hold down the UP button...
- Page 58 WUX5000 / WUX4000 User Commands Response "i:OK" is returned when the button press request has been acknowledged successfully. (It does not indicate if the operation for the pressed button was executed properly.) Description This emulates pressing of the remote control buttons for controlling the projector.
-
Page 59: Rgbgain
WUX5000 / WUX4000 User Commands RGBGAIN RGB gain adjustment Format RGBGAIN=<R gain setting:Number>▽<G gain setting:Number>▽<B gain setting:Number> GET□RGBGAIN ?△RGBGAIN Setting values for <R/G/B gain setting:Number> are -60 to 60. Environment Power Input D-RGB A-RGB COMP HDMI None Response "i:OK" is returned if the parameter was set properly. -
Page 60: Rgboffset
WUX5000 / WUX4000 User Commands RGBOFFSET RGB offset adjustment Format RGBOFFSET=<R offset setting:Number>▽<G offset setting:Number>▽<B offset setting:Number> GET□RGBOFFSET ?△RGBOFFSET Setting values for <R/G/B offset setting:Number> are -60 to 60. Environment Power Input D-RGB A-RGB COMP HDMI None Response "i:OK" is returned if the parameter was set properly. -
Page 61: Romver
WUX5000 / WUX4000 User Commands ROMVER ROM version inquiry Format GET□ROMVER ?△ROMVER Environment Power Input D-RGB A-RGB COMP HDMI None Response ROM version of the firmware is returned as g:ROMVER="<ROM version:Character string>" For details on other responses, refer to the "Error List". -
Page 62: Sat
WUX5000 / WUX4000 User Commands Color saturation setting Format RGBGAIN=<R gain setting:Number>▽<G gain setting:Number>▽<B gain setting:Number> GET□RGBGAIN ?△RGBGAIN Setting values for <Color saturation setting value:Number> are -20 to 20. Environment Power Input D-RGB A-RGB COMP HDMI None Response "i:OK" is returned if the parameter was set properly. -
Page 63: Saveimgprof
WUX5000 / WUX4000 User Commands SAVEIMGPROF Create, save, delete user memory / Create user memory status Format SAVEIMGPROF=<User memory save to parameter:ID> <User memory save to parameter:ID> USER_1 Save to User 1 USER_2 Save to User 2 USER_3 Save to User 3... -
Page 64: Scrnaspect
WUX5000 / WUX4000 User Commands SCRNASPECT Screen aspect setting Format SCRNASPECT=<Screen aspect setting parameter:ID> GET□SCRNASPECT ?△SCRNASPECT <Screen aspect setting parameter:ID> 16:10 16:10 16:9 16:9 display 4:3 display 16:9_DIS 16:9 digital image shift 4:3_DIS 4:3 digital image shift Environment Power Input... -
Page 65: Sel
WUX5000 / WUX4000 User Commands Input signal selection Format SEL=<Input signal selection parameter:ID> GET□SEL ?△SEL <Input signal selection parameter:ID> AUTO Auto Environment Power Input D-RGB A-RGB COMP HDMI None Response "i:OK" is returned if the parameter was set properly. For '... -
Page 66: Sharp
WUX5000 / WUX4000 User Commands SHARP Sharpness setting Format SHARP=<Sharpness setting:Number> GET□SHARP ?△SHARP Setting values for <Sharpness setting:Number> are -10 to 10. Environment Power Input D-RGB A-RGB COMP HDMI None Response "i:OK" is returned if the parameter was set properly. -
Page 67: Signal_Info
WUX5000 / WUX4000 User Commands SIGNAL_INFO Input signal information inquiry Format GET□SIGNAL_INFO ?△SIGNAL_INFO Environment Power Input D-RGB A-RGB COMP HDMI None Response Current input signal information is returned as g:SIGNAL_INFO="<Input signal information:Character string>" For details on other responses, refer to the "Error List". -
Page 68: Signalstatus
WUX5000 / WUX4000 User Commands SIGNALSTATUS Signal status inquiry Format GET□SIGNALSTATUS ?△SIGNALSTATUS Environment Power Input D-RGB A-RGB COMP HDMI None Response Current image signal input status is returned as 'g:SIGNALSTATUS=<Signal status:ID>' For details on other responses, refer to the "Error List". -
Page 69: Temp
WUX5000 / WUX4000 User Commands TEMP Temperature sensor value inquiry Format GET□TEMP ?△TEMP Environment Power Input D-RGB A-RGB COMP HDMI None Response For ' ' or ' ', temperature sensor value is returned as GET TEMP ?TEMP TEMP=<Number of sensors>,<Sensor 1 value>,…,<Sensor n value>... -
Page 70: Error List
WUX5000 / WUX4000 User Commands 7. Error List Item Code TYPE Error character strings Error Remedy Wait until a response is received before 0001 BAD_SEQUENCE Communication sequence error sending the next command. 0002 INVALID_COMMAND Invalid (undefined) command. Send a valid command. - Page 71 WUX5000 / WUX4000 User Commands Item Code TYPE Error character strings Error Remedy Cannot execute command with 201F INVALID_SIGNAL Change the input signal. current input signal. Numerical parameters are 17 0801 INVALID_VALUE invalid or outside the specified Set the parameters in the correct range.
-
Page 72: Error Processing
WUX5000 / WUX4000 User Commands 8. Error Processing START Error judgment "BAD̲SEQUENCE" Processing user command? Invalid (undefined) "INVALID̲COMMAND" command? Invalid command format? "INVALID̲FORMAT" Command executable while power mode is OFF? "NOT̲POWER̲SUPPLIED" Power mode is "OFF"? Command executable with PMM? "NOT̲POWER̲SUPPLIED" Power mode is "PMM"？ "BUSY (POWER)" Switching power modes? Invalid parameter type? "INVALID̲PARAMETER" Undefined parameter ID? Incorrect parameter number? Network in progress? "BUSY (NETWORK)" "BUSY (FOCUS)" Focus lens driving? Zoom lens driving? "BUSY (ZOOM)" User image registration in "BUSY (LOGO̲CAPTURE)"... - Page 73 WUX5000 / WUX4000 User Commands Limitations in input source? "INVALID̲SOURCE (**)" Incorrect input source? Requires input signal? "NO̲SIGNAL" No input signal? "INVALID̲SIGNAL (**)" Invalid input signal? Numerical parameter "INVALID̲VALUE" outside the specified range? User command is executable FINISHED - 70 -...
-
Page 74: Other
WUX5000 / WUX4000 User Commands 9. Other Use the remote control emulation function (RC command) for the following functions. Function PC command parameter Presentation timer P_TIMER - 71 -...