Page 1
UH95** UH65** (M4 X L12) (M4 X L12) (M4 X L20) (M4 X L20) UH85**, 55/65UH95**, UH85**, 55/65UH95**, 86UH95** 86UH95** UH65** UH65** (M5 X L12) (M5 X L12) : Depending on model / P/No: MFL69381804 (1603-REV03) www.lg.com Printed in Korea...
Page 13
OWNER’S MANUAL Safety and Reference LED TV* * LG LED TV applies LCD screen with LED backlights. Please read this manual carefully before operating your set and retain it for future reference. www.lg.com *MFL69340905* P/NO : MFL69340905 (1602-REV00) Printed in Korea...
Safety instructions Please read these safety precautions carefully before using the product. Make sure to connect Mains cable to compliant AC mains socket with WARNING Grounded earth pin. (Except for devices which are not grounded on earth.) Otherwise possibility you may be electrocuted or injured. Do not place the TV and/or remote control in the following Insert power cable plug completely into wall socket otherwise if not environments:...
Page 15
Do not plug too many electrical devices into a single multiple electrical Do not put or store inflammable substances near the product. There is a outlet. Otherwise, this may result in fire due to over-heating. danger of combustion/explosion or fire due to careless handling of the inflammable substances.
Page 16
Only use an authorized AC adapter and power cord approved by Do not disassemble, repair or modify the product at your own LG Electronics. Otherwise, this may result in fire, electric shock, discretion. Fire or electric shock accident can occur.
Page 17
If you install the TV on a stand, you need to take actions to prevent the Make sure there are no objects between the remote control and its product from overturning. Otherwise, the product may fall over, which sensor. may cause injury. If you intend to mount the product to a wall, attach VESA standard mounting interface (optional parts) to the back of the product.
Page 18
Periodically examine the cord of your appliance, and if its appearance As long as this unit is connected to the AC wall outlet, it is not indicates damage or deterioration, unplug it, discontinue use of the disconnected from the AC power source even if you turn off this unit appliance, and have the cord replaced with an exact replacement part by SWITCH.
Page 19
• If you watch a 3D video for a long time, you may experience eye fatigue. In this case, stop watching the 3D video and take a rest. • Only use LG 3D glasses. Otherwise, you may not be able to view 3D videos properly.
Cinema 3D Glasses Magic Remote Smart Camera range (galvanic isolator, see EN 60728-11)” AG-F***DP AN-TD700 - When applying the RF Isolator, a slight loss of signal sensitivity Dual Play Glasses LG Twin TV Engine can occur.
Using the button Lifting and moving the TV (Depending on model) Please note the following advice to prevent the TV from being scratched You can simply operate the TV functions, pressing or moving the button. or damaged and for safe transportation regardless of its type and size. NOTE • ...
We recommend the use of LG’s wall mount bracket. LG’s wall mount » Only using furniture that can safely support the television. bracket is easy to move with cables connected. When you do not use »...
Page 23
Separate purchase(Wall mounting bracket) Provided item 43UH75** 43UH65** Model 55/65UH95** 40UH63** 43UH61** VESA (mm) (A x B) 200 x 200 300 x 200 Adhesive label Standard screw Number of screws 4 Provided item LSW240B Wall mount bracket OTW420B MSW240 49/55UH85** 60/65UH85** 49/55UH77** 60/65UH77**...
Connections (notifications) CI module connection (Depending on model) Connect various external devices to the TV and switch input modes to View the encrypted (pay) services in digital TV mode. select an external device. For more information of external device’s • Check if the CI module is inserted into the PCMCIA card slot in the connection, refer to the manual provided with each device.
Remote control Q.MENU RATIO Number buttons Enters numbers. SUBTITLE Shows programme guide. INPUT (Depending on model) LIVE ZOOM Returns to the previously viewed programme. The descriptions in this manual are based on the buttons on the remote Adjusts the volume level. control.
Magic remote functions Adjusts the volume level. Scrolls through the saved programmes. (Depending on model) (MUTE) Mutes all sounds. When the message “Magic remote battery is low. Change the battery.” is * By pressing and holding the button, audio descriptions displayed, replace the battery.
Registering magic remote disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM How to register the magic remote for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to To use the Magic Remote, first pair it with your TV.
Troubleshooting Specifications Cannot control the TV with the remote control. Wireless module specifications • Check the remote control sensor on the product and try again. • As band channels can vary per country, the user cannot change or • Check if there is any obstacle between the product and the remote adjust the operating frequency.
Page 29
CI Module Size (W x H x D) 100.0 mm x 55.0 mm x 5.0 mm Operating 0 °C to 40 °C Temperature Operating Less than 80 % Humidity Environment condition Storage -20 °C to 60 °C Temperature Storage Less than 85 % Humidity 1 Only Satellite models.
Page 30
Regulatory WARNING! Never place a television set in an unstable location. A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as: • Using cabinets or stands recommended by the manufacturer of the television set. • ...
Page 32
Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service. MODEL SERIAL...
OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. www.lg.com...
KEY CODES key CODeS • This feature is not available for all models. Code Code Function Note Function Note (Hexa) (Hexa) CH +, PR + R/C Button List R/C Button CH -, PR - R/C Button Exit R/C Button Volume + R/C Button PIP(AD) R/C Button...
Page 35
(TV) (PC) • LGTV supports PL2303 chip-based (Vendor ID : 0x0557, Product ID : 0x2008) USB to serial converter RS-232C IN which is not made nor provided by LG. (CONTROL & SERVICE) (PC) (TV) • It can be purchased from computer stores that carry accessories for IT support professionals.
(TV) (PC) EXTERNAL CONTROL DEVICE SETUP (TV) (PC) Phone jack Type RS-232C IN • You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and (CONTROL & SERVICE) (PC) (TV) the TV, which is specified in the manual. RS-232C IN (CONTROL &...
EXTERNAL CONTROL DEVICE SETUP Communication Parameters • Baud rate : 9600 bps (UART) • Stop bit : 1 bit • Data length : 8 bits • Communication code : ASCII code • Parity : None • Use a crossed (reverse) cable. Command reference list (Depending on model) DATA...
EXTERNAL CONTROL DEVICE SETUP Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99.
Page 39
EXTERNAL CONTROL DEVICE SETUP * Commands may work differently depending on model and signal. 01. Power (Command: k a) Ack [d][ ][Set ID][ ][OK/NG][Data][x] ► To control Power *On or Off of the set. * In case of video mute on only, TV will display On Transmission[k][a][ ][Set ID][ ][Data][Cr] Screen Display(OSD).
Page 40
EXTERNAL CONTROL DEVICE SETUP Data Min : 00 to Max : 64 * (Depending on model) Ack [i][ ][Set ID][ ][OK/NG][Data][x] 14. Bass (Command: k s) 09. Tint (Command: k j) ► To adjust Bass. ► To adjust the screen tint. You can also adjust in the AUDIO menu.
Page 41
EXTERNAL CONTROL DEVICE SETUP Set ID = All = 00 5th Band 20(decimal) Data 00 & 01 = Channel Data is 10 = 00 0a Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x] Data 02 = Analog Antenna TV = 00 Result = ma 00 00 0a 00 * It depends on model, and can adjust when sound mode is EQ adjustable value.
Page 42
EXTERNAL CONTROL DEVICE SETUP Number Data 05 = Digital Antenna TV = 02 - 22 : Antenna TV (DTV) – Don’t Use Physical Total = ma 00 00 00 11 00 01 02 Channel Number - 26 : Cable TV (CADTV) - Don’t Use Physical 2.
Page 43
11 11 EXTERNAL CONTROL DEVICE SETUP 24. Input select (Command: x b) (Main Picture Input) ► To select input source for main picture. Transmission [x][b][ ][Set ID][ ][Data][Cr] Data X : don’t care 00 : DTV 01 : CADTV 02 : Satellite DTV 10 : ATV Ack [t][ ][Set ID][ ][OK][Data00][Data01][Data02] ISDB-BS (Japan)
Page 44
EXTERNAL CONTROL DEVICE SETUP 27. Auto Configure (Command: j u) (Depending on model) ► To adjust picture position and minimize image shaking automatically. It works only in RGB (PC) mode. Transmission [j][u][ ][Set ID][ ][Data][Cr] Data 01 : Run Auto Configure Ack [u][ ][Set ID][ ][OK/NG][Data][x]...