Page 1
DISHWASHER OWNER'S MANUAL MODEL : D1420W(L,M,T,B,C,D,A)F(B,U) D1421W(L,M,T,B,C,D,A)F(B,U) WZ-6805WF WZ-6805MF WZ-6806RF Please read this manual carefully before operating your dishwasher. Retain it for future reference. You may also find user manual in video version at following link www.guidelg.com/dishwasher...
ONTENTS SAFETY AND CAUTION INSTALLATION INSTRUCTIONS PARTS NAME FUNCTION OF CONTROL BUTTON BEFORE USING FOR THE FIRST TIME HOW TO USE AND OPERATE OPERATING SEQUENCE PROGRAM USER MAINTENANCE INSTRUCTIONS TROUBLE SHOOTING GUIDE SPECIFICATION...
AFETY AND CAUTION IMPORTANT SAFETY INSTRUCTIONS WARNING - When using your dishwasher, follow basic precautions, including the following: • Please read this manual carefully before using During use the dishwasher for the first time. • Only suitable household utensils should be •...
Page 4
AFETY AND CAUTION concerning the Power Cord CAUTION Most appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain. Do not overload wall outlets.
NSTALLATION INSTRUCTIONS WARNING A qualified electrician/plumber or competent person should carry out any electrical/plumbing work required to install this appliance. Step 1 : Step 2 : PREPARE CUPBOARD OPENING PREPARATION FOR ELECTICAL WIRING CAUTION This dishwasher is designed to fit the size shown as below.
Page 6
NSTALLATION INSTRUCTIONS Step 3 : Step 4 : PREPARING THE DISHWASHER INSTALLING THE FOR INSTALLATION DISHWASHER IN CUPBOARD Lay the dishwasher on its back. Before sliding the dishwasher into the cupboard opening, all necessary height Adjust the legs to the required height and balancing adjustments should be as shown in below figure.
Page 7
NSTALLATION INSTRUCTIONS Step 5 : When the drain hose is connected to a separate standpipe, it is essential that an DRAIN LINE CONNECTION airtight connection be made. Refer to Fig.B If the end of drain hose does not fit to the drain line, use a rubber connector(not supplied) that is resistant to heat and detergent.
Page 8
NSTALLATION INSTRUCTIONS Step 8 : Step 6 : HOW TO LEVEL THE DISHWASHER WATER SUPPLY CONNECTION Connect the water supply hose to the After installing the dishwasher, you may water tap as shown.(Some models notice a slight sticking of the door to the consist of an inlet valve and hose.) dishwasher, when you open or close the door.
ARTS NAME 1. Control Panel 11. Upper Rack 2. Door Handle 12. Cutlery Basket 3. Front Cover 13. Detergent And Rinse Aid Dispenser 4. Lower Cover 14. Vapor Vent Cover 5. Display Window 15. Upper Spray Arm 6. Power Button 16.
UNCTION OF CONTROL BUTTON MODEL : D1420W(L,M,T,B,C,D,A)F(B,U) WZ-6805WF / WZ-6805MF / WZ-6806RF Program MODEL : D1421W(L,M,T,B,C,D,A)F(B,U) Program...
Page 11
Indicator Time Left Beep On/Off Rinse Half Load Delay Start Spray Power Child Lock Cool Dry Indicator Time Left Beep On/Off Rinse Half Load Delay Start Spray Power Child Lock...
Page 12
UNCTION OF CONTROL BUTTON Program • When you want to select program, press this button. • If you want to sterilize the dishes, press UV button. • After drying cycle, sterilizer will be performed by UV lamp. • At this time, “St” code is displayed in display window. •...
EFORE USING FOR THE FIRST TIME Hardness setting You have to check your water hardness and set the softening system level before operating your dishwasher. < Water hardness level > Step 1. Check and find water hardness level Method 1 1) Check the water hardness of your area.
Page 14
EFORE USING FOR THE FIRST TIME Step 3. Salt Filling This model has a water softener to soften hard water. Please read these notes carefully for correct operation. In order to provide satisfactory rinsing results, the dishwasher requires soft water, i.e., containing little or no lime, otherwise water stains will be left behind on the dishes and interior containers.
OW TO USE AND OPERATE 1. Loading your Dishwasher Knife, fork, and spoon handles should be positioned between the tines. For better washing performance, always load the dishwasher according to the instructions. Before loading items into the dishwasher clean off large particles of food, in particular insoluble items such as bones, pips, etc.
Page 16
OW TO USE AND OPERATE Loading examples (Energy test) Pull the rack out to the end of the rails, then lift the front of the rack so the rollers clear the stop on the end of the rail. The rack can now be slid forward and removed from the rails.
Page 17
OW TO USE AND OPERATE How to use How to use Fold-down dividers at the lower and the upper rack can be lowered to improve stacking of pots and pans. Loading examples (Energy test) Fold-down dividers at the upper rack can be lowered to improve stacking of dishes.
Page 18
OW TO USE AND OPERATE 6. Adjusting the Upper Rack WARNING Before adjusting, ensure the rack is Your upper rack can be raised or lowered to empty of all crockery. cater for different sized crockery. Before Otherwise crockery may be damaged adjusting, ensure that the rack is empty.
Page 19
OW TO USE AND OPERATE 8. Refilling Push latch to open For refilling Rinse Aid Depending on the dosage setting and the number of washes, the chamber may need to be topped up, approximately once a month. The rinse aid level can be checked by two methods.
Page 20
OW TO USE AND OPERATE For refilling Salt 9. Drying When the salt container is empty, the salt refill To assist drying, we recommend that the lamp will automatically turn on during door be fully opened after the cycle. operation. The salt should be refilled after the cycle has finished.
PERATING SEQUENCE The time in the display window will start Press the “Power” button to decrease minute by minute. If the door is opened during the program Check there is rinse aid a safety device ensures that the machine and salt stops.
ROGRAM Running time may vary according to the water temperature, water pressure and voltage. Running time doesn’t include “Cool Dry - 30min”. WASH RINSE COOL Program Heating Pre Wash Main Wash Rinse 1 Rinse 2 Rinse 3 Rinse Dual Wash The program sequence is optimized and adapted in accordance with how dirty the Auto dishes are.
SER MAINTENANCE INSTRUCTIONS To prevent trouble and poor operating, it is important to check filters and spray arms at regular intervals. Filters Lower Spray Arm • Remove the lower rack first. • Check that the water jet holes are not blocked.
ROUBLE SHOOTING GUIDE If a problem occurs check below to see whether this can be solved. In the unlikely event that the problem cannot be rectified, please contact a service engineer. Problem Possible Causes Solution • Plug is not properly inserted into the socket.
Page 25
ROUBLE SHOOTING GUIDE Problem Possible Causes Solution • Straighten hose(s). • The drain hose is kinked. The display shows "OE" • Clean the filter. • The filter is clogged. code. (Water is not • If you can not solve • Motor trouble. pumped away.) the problem, call for (Washing motor or Drain motor)
Page 28
D1420W(L,M,T,B,C,D,A)F D1421W(L,M,T,B,C,D,A)F WZ-6805WF / WZ-6805MF D1420W(L,M,T,B,C,D,A)B WZ-6806RF D1421W(L,M,T,B,C,D,A)B D1420W(L,M,T,B,C,D,A)U D1421W(L,M,T,B,C,D,A)U Capacity 14 Place settings Weight See rating label Power Supply See rating label Power Consumption See rating label Water Feed Pressure 50 ~ 800 kPa P/No.: MFL62077144...