Advertisement
Quick Links
42in Recycler
TimeCutter
Model No. 139-3265
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
2
3
4
1
Preparing the Machine
No Parts Required
Procedure
1.
Park the machine on a level surface.
2.
Disengage the PTO, engage the parking brake,
and move the motion-control levers outward to
the N
-L
EUTRAL
OCK
3.
Shut off the engine and remove the key.
© 2019—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
®
®
4275 Riding Mower
Description
No parts required
Baffle assembly
Flange nut (5/16 inch)
Carriage bolt (5/16 x 3/4 inch)
Decal
Mulching blade
position.
Register at www.Toro.com.
Kit
Qty.
–
1
4
2
1
2
2
Preparing the Mower Deck
No Parts Required
Procedure
1.
Remove the mower deck from the machine;
refer to the Operator's Manual for the machine.
2.
Turn the mower deck upside down.
3.
Remove the existing mower blades; refer to the
Operator's Manual for the machine.
Form No. 3435-907 Rev A
Installation Instructions
Use
Prepare the mower deck.
Install the kit.
Install the decal and mulching blades.
Original Instructions (EN)
All Rights Reserved *3435-907* A
Printed in the USA
Advertisement
Related Manuals for Toro 139-3265
Summary of Contents for Toro 139-3265
- Page 1 Form No. 3435-907 Rev A 42in Recycler ® TimeCutter ® 4275 Riding Mower Model No. 139-3265 Installation Instructions Installation Loose Parts Use the chart below to verify that all parts have been shipped. Procedure Description Qty. – No parts required Prepare the mower deck.
- Page 2 Installing the Kit Parts needed for this procedure: Baffle assembly Flange nut (5/16 inch) g307649 Figure 3 Carriage bolt (5/16 x 3/4 inch) Procedure Tighten all fasteners. Install the baffle assembly to the right-hand side of the mower deck with 2 flange nuts (5/16 inch) as shown in Figure 1.
- Page 3 Stopping the Machine Operation If you must stop the forward motion of the machine while mowing, a clump of grass clippings may Operating Tips drop onto your lawn. To avoid this, move onto a previously cut area with the blades engaged or you can disengage the mower deck while moving forward.