About The Freezer Drawer; Freezer Shelves And Baskets - GE GBSC0HBX Owner's Manual And Installation Instructions
Models 20, 22 and 23
Hide thumbs
Also See for GBSC0HBX:
- Dimensions and installation information (2 pages) ,
- Energy manual (1 page) ,
- Energy manual (1 page)
Table of Contents
Advertisement
Available languages
Available languages
About the freezer drawer.
Not all features are on all models.
Appearance and features may vary
Appearance may vary
Appearance may vary
8
(on some models)
Freezer Shelves and Baskets
A shelf above the ice storage bin
A half-width basket
A deep full-width basket
Basket Removal
To remove the deep full-width basket on
freezer drawer models:
Open the freezer drawer until it stops.
The freezer basket rests on the inside
tabs on the drawer slides.
Lift the basket so that it is out of all
6 slide bracket tabs.
Tilt the basket and lift out of the drawer.
To remove the half-width basket:
Pull the basket out to the stop location.
Lift the basket up at the front to release
it from the stop hooks on each side.
Lift the basket out to remove it from
the sides.
NOTE: Do not fill baskets higher than the rim
of the basket. This may cause baskets to stick
or jam when opening or closing.
When replacing the deep full-width basket:
Tilt the basket back and lower it down
into the drawer. Rotate the basket to a
horizontal position and press it down into
the 6 alignment tabs.
NOTE: Always be sure that the basket is
seated in all 6 slide bracket tabs before
sliding back into the freezer. The basket can
be turned in either direction front to back and
installed into the freezer.
When replacing the basket, make sure that
the basket goes under the stop hooks on
each side.
NOTE: Always be sure to fully close this
basket.
Hide quick links:
Advertisement
Chapters
Table of Contents
