– if the appliance is off and you set the minute minder. When the minute minder func-
tion ends, the display goes back to night brightness;
Cooling fan
When the appliance operates, the cooling fan activates automatically to keep the surfaces
of the appliance cool. If you deactivate the appliance, the cooling fan can continue to oper-
ate until the appliance cools down.
CARE AND CLEANING
WARNING!
Refer to "Safety information" chapter.
Notes on cleaning:
• Clean the front of the appliance with a soft cloth with warm water and cleaning agent.
• To clean metal surfaces use a usual cleaning agent.
• Clean the appliance interior after each use. Then you can remove dirt more easily and it
does not burn on.
• Clean stubborn dirt with a special oven cleaner.
• Clean all accessories (with a soft cloth with warm water and cleaning agent) after each
use and let them dry.
• If you have nonstick accessories, do not clean them using an aggressive agents, sharp
edged objects or dishwasher. It can cause a damage to the nonstick coating.
Steam cleaning
1.
Remove the worst of the residual dirt manually.
2.
Put approximately 250 ml of water and 3 tablespoons of vinegar directly in the steam
generator.
3.
Set Steam cleaning function. Refer to "Oven functions".
The display shows the duration (15 minutes) and preset temperature (96°C).
Touch OK.
The cleaning starts.
4.
An acoustic signal sounds when steam cleaning is completed.
Touch any sensor field to stop the signal.
5.
Wipe out the appliance with a soft cloth.
Remove water from the steam generator with the Sponge and rub dry.
Keep the door open for approximately 1 hour to let the appliance dry fully.
You can use the End function to delay start of cleaning process. Refer to "Setting the END".
Shelf support
You can remove the shelf support to clean the side walls.
Care and cleaning
23