Table of Contents
Advertisement
Playback
NTSC, PAL and MESECAM video tapes can be played back on
this video cassette player. Refer to the "Colour system output
mode selection" section for details.
Before proceeding:
Turn on the power of the TV and video cassette player.
Make sure that the TV is set to the video channel or that the
TV's TV/VIDEO switch is set to VIDEO (refer to the "Setting
the video channel" section for details).
1
NTSC
MIC
DIGITAL ECHO
PLAYBACK
SP/LP/EP
ON PAL TV
B.E.S.T POWER-ON
LP / EP
NTSC
4.43
STANDBY / REC
MIN
MAX
0
10
NTSC 3.58
PAL NTSC
1
Load a pre-recorded cassette.
If the safety tab on the cassette is removed, playback will
start automatically.
2
Press the Play - button to start playback.
7 Press the Stop/Eject § button or the remote control's
Stop 7 button to stop playback.
To fast forward or rewind the tape:
7 From the stop mode, press the Fast forward ¡ or
Rewind 1 button.
Note:
All five indicators excluding the STANDBY/REC indicator blink
one by one in a clockwise sequence during playback or fast
forward mode and in a counterclockwise sequence during
rewind mode. They do not blink one by one during rewinding
in the repeat playback mode.
REMOTE CONTROL UNIT
VIDEO
TV/VCR
2
AUTO
- TRACKING +
- TV CH +
- VOLUME +
TV/VCR
TV
B.E.S.T.
NTSC Playback on PAL TV
The vertical size of the playback picture will shrink and some
picture "noise" may appear on the screen.
The playback picture may roll. In this case adjust the picture
with the TV's vertical hold knob (with some TV's this adjust-
ment may not be possible).
The colour of the playback picture may differ from the
original.
In the forward/reverse shuttle search or still modes there
may be no colour depending on the TV and video cassette
player combination.
Colour system output mode selec-
tion
2
To watch an NTSC tape, it will be necessary to select one of the
following output modes.
Selecting the NTSC PLAYBACK ON PAL TV mode
Select this mode to watch NTSC tapes on a PAL system TV.
Selecting the NTSC 4.43 mode
Select this mode to watch NTSC tapes on a multi-system TV
(that has an NTSC 4.43 setting).
Select NTSC 4.43 to record NTSC 4.43 signal.
Selecting the NTSC 3.58 mode
Select this mode to watch NTSC tapes on a NTSC system TV.
NTSC
PLAYBACK
ON PAL TV
NTSC
4.43
NTSC3.58
NTSC
PLAYBACK
ON PAL TV
NTSC
4.43
NTSC3.58
NTSC
PLAYBACK
ON PAL TV
NTSC
4.43
NTSC3.58
7
- Quick Links:
- Connections
Hide quick links:
Advertisement
Table of Contents
