4
Installing and Replacing Network Interface Cards
10. Close the chassis assembly until it clicks into place.
11. Tighten the thumbscrews that hold the chassis assembly.
The system automatically restarts when the chassis assembly clicks into place.
Configuring and Activating Interfaces
The IP350 or IP380 appliance automatically detects any new NIC when the
system is restarted. Use Voyager to configure and activate the logical and
physical interfaces on the NIC.
For information about how to access Voyager and the related reference
materials, see
46
All manuals and user guides at all-guides.com
Chassis assembly thumbscrews
"To open Voyager"
on page 36.
IP350 and IP380 Appliance Installation Guide
00252c
00248a