Advertisement
Quick Links
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
Wear eye
instructions
protection
1. SAFETY
1.1.
GENERAL SAFETY
WARNING! Ensure Health & Safety, local authority, and general workshop
‰
practice regulations are adhered to when using this bench.
Locate the bench in a suitable work area.
9
Keep the work area clean, uncluttered and ensure there is adequate lighting.
9
WARNING! Use the bench on level and solid ground, preferably concrete.
‰
Keep the bench clean and tidy in accordance with good workshop practice.
9
Keep children and unauthorised persons away from the work area.
9
DO NOT use the bench for any purpose other than for which it is designed.
8
DO NOT undertake work on the bench without the workpiece being
8
adequately secured
DO NOT use the bench outdoors.
8
DO NOT get the bench wet or use in damp or wet locations or areas where
8
there is condensation.
DO NOT clean the bench with any solvents which may damage the surface or the protective coating on the worktop.
8
2. INTRODUCTION
Made from oak with a varnished finish. Features tool well, shelf, tool drawer, front and end vices, four metal bench stops and four wooden
board jacks.
3. SPECIFICATION
Model No: ............................................................ AP1520.V2
Size(W x D x H): ...................................1520 x 620 x 850mm
Vice dimensions (x2): .......... 280mm Wide x 190mm Opening
Worktop (W x D): ............................................1390 x 355mm
4. CONTENTS
© Jack Sealey Limited
1.52M WOODWORKING BENCH
MODEL NO:
Wear protective
Wear safety
gloves
footwear
Original Language Version
AP1520.V2
Wear protective
clothing
AP1520.V2 Issue 1 23/04/21
Advertisement
Related Manuals for Sealey AP1520.V2
Summary of Contents for Sealey AP1520.V2
- Page 1 AP1520.V2 MODEL NO: Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
- Page 2 Position the part assembled drawer so that the drawer joining plates align with the pre-drilled holes and secure with the remaining screws (fig 8 - S). 5.3.7. Place the assembled drawer onto the draw runners and slide into position. AP1520.V2 Issue 1 23/04/21 Original Language Version © Jack Sealey Limited...
- Page 3 Important: No Liability is accepted for incorrect use of this product. Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim. Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR 01284 757500 01284 703534 sales@sealey.co.uk...