Table of Contents
Advertisement
Problem Solving
Check
Is the image brightness adjusted correctly?
Are the cables connected correctly?
g
Is the Contrast
adjusted correctly?
Is the color adjustment set correctly?
Are the color saturation and tint adjusted correctly?
Is the brightness of the room appropriate?
Images appear dark
Check
Is the image brightness set correctly?
g
Is the Contrast
adjusted correctly?
Is only one projector being used?
Adjust the Brightness setting from the Configuration menu.
s Image - Brightness
p.119
Check that all the cables required for projection are securely connected.
Check that no cables are disconnected and that there are no poor contacts in the cables.
s "Connecting Equipment"
p.42
Adjust the Contrast setting from the Configuration menu.
s Image - Contrast
p.119
Adjust the Gamma or RGBCMY setting from the Configuration menu.
s Image - Advanced
p.119
s "Adjusting the Image"
p.73
Adjust the Color Saturation and Tint settings from the Configuration menu.
s Image - Color Saturation, Tint
p.119
If the room is darker than when the auto adjustment was performed, the tint of the projected images may not be displayed
correctly. Make the room darker and then perform auto adjustment again.
s "Screen Matching"
p.92
s "Color Calibration"
p.182
Check the Brightness and Brightness Settings values from the Configuration menu.
s Image - Brightness
p.119
s Settings - Brightness Settings
p.123
Adjust the Contrast setting from the Configuration menu.
s Image - Contrast
p.119
Check if the following item is set to dark.
s Extended - Multi-Projection - Screen Matching - Brightness Settings
Remedy
Remedy
p.125
168
Advertisement
Table of Contents
