Page 1
OWNER’S MANUAL OLED TV Please read this manual carefully before operating your set and retain it for future reference. www.lg.com...
Page 2
• Adopted OLED display with color reproduction rate closest to the natural color and superb contract ratio based on organic light emitting material without any hazardous substance to the human body, and has lower power consumption rate compared to LCD, optimal for video with the 1,000 times faster response speed •...
CONTENTS PREPARATION OLED TV Model : 15EL9*** ... A-1 EXTERNAL EQUIPMENT SETUP Power Connection ...1 Antenna Connection ...2 Connecting with a RF Cable...3 Connecting with an HDMI cable...4 Usb setup ...4 WATCHING TV / PROGRAMME CONTROL Turning on the TV ... 5 Initializing setup ...5 Programme Selection ...
Page 4
CONTENTS SOUND & LANGUAGE CONTROL Auto Volume Leveler... 59 Clear Voice II ...60 Preset Sound Settings - Sound Mode... 61 Sound Setting Adjustment -User Mode...62 Infinite Sound...62 Balance ...63 Audio Reset ...64 Audio Description (In Digital Mode only)...65 I/II - Stereo/Dual Reception (In Analogue Mode Only) ...
PREPARATION O O L L E E D D T T V V M M o o d d e e l l : : 1 1 5 5 E E L L 9 9 * * * * * * ACCESSORIES Ensure that the following accessories are included with your TV.
Page 6
PREPARATION FRONT PANEL CONTROLS NOTE The energy consumed during use can be significantly reduced if the level of brightness of the picture is reduced, and this will reduce the overall running cost. CAUTION Do not step on the glass stand or subject it to any impact. It may break, causing possible injury from fragments of glass, or the TV may fall.
Page 7
SIDE PANEL INFORMATION ■ Image shown may differ from your TV. • Open the water resistant cover only when connecting an external device. • If you use the product with the water resistant cover open in a humid environment, the water resistant function can deteriorate. SERVICE Port HDMI Input USB Input...
Page 8
PREPARATION POSITIONING YOUR DISPLAY ■ Image shown may differ from your TV. ■ Adjust the position of the panel in various ways for maximum comfort. • Tilt range 10˚ 19˚ DESKTOP PEDESTAL INSTALLATION For adequate ventilation allow a clearance of 10 cm all around the TV. 10 cm 10 cm 10 cm...
Page 9
TV set; e.g. concrete, natural rock, brick and hollow block. LG is not liable for any accidents or damage to property or TV due to incorrect installation: - Incorrect fastening of screws to surface which may cause TV to fall and cause personal injury.
Page 10
PREPARATION REMOTE CONTROL KEY FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. ENERGY AV MODE INPUT SAVING LIST Q.VIEW MARK RATIO MUTE MENU GUIDE Q.MENU BACK INFO EXIT Switches the TV on from standby or off to standby. (POWER) Adjust the Energy Saving mode of the TV.( ENERGY SAVING...
Page 11
ENERGY AV MODE INPUT SAVING LIST Q.VIEW MARK control buttons RATIO MUTE MENU GUIDE Q.MENU BACK INFO EXIT VOLUME UP Adjusts the volume. /DOWN Displays the selected favourite programme. MARK Select the input to apply the Picture Wizard settings. Check and un-check programmes in the USB menu. RATIO Selects your desired Aspect Ratio of picture.( MUTE...
EXTERNAL EQUIPMENT SETUP POWER CONNECTION Image shown may differ from your TV. ■ Connect the power as shown in the following figure to use the TV. ■ Power cord AC/DC adapter To connect the power, connect the following in order : Connect the RF/DC cable to the A A N N T T / / P P O O W W E E R R I I N N socket on the side of the TV - AC/DC adapter –...
EXTERNAL EQUIPMENT SETUP To prevent damage do not connect to the mains outlet until all connections are made between the devices. ■ ANTENNA CONNECTION For optimum picture quality, adjust antenna direction. ■ An antenna cable and converter are not supplied. ■...
To avoid damaging any equipment, never plug in any power cord until you have finished connecting all equipment. ■ Image shown may differ from your TV. ■ CONNECTING WITH A RF CABLE To avoid picture noise (interference), allow adequate distance between the VCR and TV. ■...
EXTERNAL EQUIPMENT SETUP CONNECTING WITH AN HDMI CABLE Connect the HDMI output of the external equipment (digital set-top box, DVD, etc.) to H H D D M M I I I I N N jack on the TV. Turn on the external equipment. ( Refer to the external equipment's manual for operating instructions.) Select H H D D M M I I input source using the I I N N P P U U T T button on...
WATCHING TV / PROGRAMME CONTROL TURNING ON THE TV - When your TV is turned on, you will be able to use its features. Firstly, connect the power cord correctly. At this stage, the TV switches to standby mode. In standby mode to turn TV on, press the r r / I, INPUT or P POWER, INPUT, P INITIALIZING SETUP If the OSD (On Screen Display) is displayed on the screen after turning on the TV, you can adjust the...
WATCHING TV / PROGRAMME CONTROL QUICK MENU Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual. Q.Menu (Quick Menu) is a menu of features which users might use frequently. A A s s p p e e c c t t R R a a t t i i o o : Selects your desired picture format. For Zoom Setting, select 14:9, Zoom and Cinema Zoom in Ratio Menu.
ON SCREEN MENUS SELECTION AND ADJUSTMENT Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual. SETUP Move Auto Tuning Manual Tuning Programme Edit Booster : Off Software Update : On Diagnostics OPTION Move Menu Language : English Audio Language : English...
WATCHING TV / PROGRAMME CONTROL AUTO PROGRAMME TUNING (For countries other than Finland and Sweden) Use this to automatically find and store all available programmes. When you start auto programming, all previously stored service information will be deleted. The maximum number of programmes that can be stored is 500. But the number may differ slightly depending on broadcasting signals.
Page 21
AUTO PROGRAMME TUNING (Only for Finland and Sweden) DVB-C Auto Tuning is a menu for users in countries that support DVB cable. Use this to automatically find and store all available programmes. When you start auto programming, all previously stored service information will be deleted. If you want to select the A A n n t t e e n n n n a a , SETUP Move...
Page 22
WATCHING TV / PROGRAMME CONTROL If you want to select the C C a a b b l l e e , SETUP Move Auto Tuning Auto Tuning Manual Tuning Programme Edit Booster : Off Software Update : On Diagnostics MENU Select S S E E T T U U P P .
MANUAL PROGRAMME TUNING Manual Tuning lets you manually add a programme to your programme list. (For countries other than Finland and Sweden & When selecting Antenna if Finland, Sweden or “--” country is chosen) SETUP Move Auto Tuning Manual Tuning Manual Tuning Programme Edit Booster...
Page 24
WATCHING TV / PROGRAMME CONTROL (When selecting Cable (DVB cable mode) if Finland, Sweden or “--” country is chosen) SETUP Auto Tuning Manual Tuning Manual Tuning Programme Edit Booster Software Update Diagnostics MENU Select S S E E T T U U P P . Select M M a a n n u u a a l l T T u u n n i i n n g g .
MANUAL PROGRAMME TUNING Manual Tuning lets you manually tune and arrange the stations in whatever order you desire. SETUP Move Auto Tuning Manual Tuning Manual Tuning Programme Edit Booster : Off Software Update : On Diagnostics MENU Select S S E E T T U U P P . Select M M a a n n u u a a l l T T u u n n i i n n g g .
Page 26
WATCHING TV / PROGRAMME CONTROL SETUP Auto Tuning Manual Tuning Manual Tuning Programme Edit Booster Software Update Diagnostics Assigning a station name You can assign a station name with five characters to each programme number. Select S S E E T T U U P P . MENU Select M M a a n n u u a a l l T T u u n n i i n n g g .
PROGRAMME EDIT When a programme number is skipped, it means that you will be unable to select it using P viewing. If you wish to select the skipped programme, directly enter the programme number with the NUMBER buttons or select it in the Programme edit menu. This function enables you to skip the stored programmes.
Page 28
WATCHING TV / PROGRAMME CONTROL IN DTV/RADIO MODE Skipping a programme number Select a programme number to be skipped. BLUE Turn the programme number to blue. BLUE BLUE Release. BLUE IN TV MODE This function enables you to delete or skip the stored programmes. You can also move some channels and use other programme numbers.
SOFTWARE UPDATE Software Update means software can be downloaded through the digital terrestrial broadcasting system. SETUP Move Auto Tuning Manual Tuning Programme Edit Booster : Off Software Update : On Software Update : On Diagnostics Select S S E E T T U U P P . MENU Select S S o o f f t t w w a a r r e e U U p p d d a a t t e e .
Software Update : On Diagnostics Select O O n n or O O f f f f . Save. Engineering Diagnostics Manufacturer : LG Electronics Inc. Model/Type : 15EL9500-ZA Serial No. : SKJY1107 Software Version : V1.10.00 CH 30 CH 34...
SELECTING THE PROGRAMME LIST You can check which programmes are stored in the memory by displaying the programme list. Programme List Mini Glossary Displayed when the Locked Programme. Displaying programme LIST Display the Programme List. LIST Selecting a programme in the programme list Select a programme.
WATCHING TV / PROGRAMME CONTROL FAVOURITE PROGRAMME SETUP Selecting favourite programme Favorite programmes is a convenient feature that lets you quickly scan up to programmes of your choice without having to wait for the TV to scan through all the in-between programmes. Favourite Favourite Select your desired...
INPUT LIST HDMI can be recognized by a detect pin and thus enabled only when an external device approves voltage. By using T T V V / / R R A A D D button, you can move from External Input to RF Input and to the last watched programme in DTV/RADIO/TV mode.
WATCHING TV / PROGRAMME CONTROL INPUT LABEL Selects a label for each input source. OPTION Move Menu Language : English Audio Language : English Subtitle Language : English Hard of Hearing( ) : Off Country : UK Input Label Input Label SIMPLINK : On : Off...
SIMPLE MANUAL You can easily and effectively access the TV information by viewing a simple manual on the TV. During the Simple Manual operation, audio will be muted. OPTION Move Audio Language : English Subtitle Language : English Hard of Hearing( ) : Off Country : UK...
Page 36
WATCHING TV / PROGRAMME CONTROL This function operates only with devices with the SIMPLINK logo. Please check the SIMPLINK logo. This TV might not function properly when using it with other products with HDMI-CEC function. This allows you to control and play other AV devices connected to the display through HDMI cable without addi- tional cables and settings.
Page 37
Connecting to Home Theater with the SIMPLINK logo. Connect the H H D D M M I I I I N N terminal on the side of the TV and the HDMI output terminal of the Home Theater using HDMI cables.
Page 38
WATCHING TV / PROGRAMME CONTROL SIMPLINK Functions D D i i s s c c p p l l a a y y b b a a c c k k Control connected AV devices by pressing the D D i i r r e e c c t t P P l l a a y y After connecting AV devices to the TV, you can directly control the devices and play media without additional settings.
AV MODE You can select the optimal images and sounds when connecting AV devices to external input. O O f f f f Disables the AV MODE. C C i i n n e e m m a a Optimizes video and audio for watching movies. S S p p o o r r t t Optimizes video and audio for watching sports events.
WATCHING TV / PROGRAMME CONTROL INITIALIZING (RESET TO ORIGINAL FACTORY SETTINGS) This function initializes all settings. But the settings of D D a a y y and It is useful to initialize the product or when you move to other city or country. When the Factory Reset is completed, you must restart the Initializing setup.
TO USE A USB DEVICE When connecting a USB device When you connect a USB device, this pop up menu is displayed, automatically. “POP UP MENU” will not be displayed while the OSD including Menu, EPG or Schedule list is activated. When the Pop Up menu does not appear, you can select Music List, Photo List or Movie List in the USB menu.
TO USE A USB DEVICE PHOTO LIST You can view photo files on USB storage device. The On Screen Display may be different from your TV. Images are an example to assist with the TV operation. When you are watching the photo by the Photo List function, you can not change the picture mode. PHOTO(*.JPEG) supporting file Baseline : 64 x 64 to 15360 x 8640 Progressive : 64 x 64 to 1920 x 1440...
Page 43
Photo Selection and PopUp Menu Photo List Page 2/3 No Marked Drive1 Up Folder JMJ001 KR101 09/10/2008 KR102 09/10/2008 JMJ001 09/10/2008 JMJ002 09/10/2008 1366 768, 125KB JMJ003 09/10/2008 Up Folder JMJ004 09/10/2008 Navigation Popup Menu Page Change Photo List Page 2/3 No Marked Drive1 Up Folder...
Page 44
TO USE A USB DEVICE How to view photo Detailed operations are available on full-sized photo view screen. Photo List Page 2/3 No Marked Drive1 Up Folder JMJ001 KR101 KR102 JMJ001 JMJ002 1366 768, 125KB JMJ003 Up Folder JMJ004 Navigation Popup Menu Photo List Page 2/3...
Page 45
1/17 Slideshow Delete Option Hide S S l l i i d d e e s s h h o o w w : When no picture is selected, all photos in the current folder are displayed during slide show. If some photos are selected, those photos are displayed in a slide show.
TO USE A USB DEVICE MUSIC LIST You can play music files on USB storage device. Purchased music files(*.MP3) may contain copyright restrictions. Playback of these files may not be support- ed by this model. Music file on your USB device can be played by this unit. The On Screen Display may be different from your TV.
Page 47
Music Selection and PopUp Menu As shown, up to 6 music titles are listed per page. Music List No Marked Page 2/3 Music Title Up Folder 00:00/01:34 Up Folder Navigation Popup Menu Page Change Music List Page 2/3 No Marked Music Title Up Folder...
Page 48
TO USE A USB DEVICE ■ If you don't press any button for a while during the playing, the play information box (as shown in the below) will float as a screen saver. ■ The ‘Screen Saver’? Screen saver is to prevent screen pixel damage due to an fixed image remaining on the screen for a extended period of time.
MOVIE LIST You can play movie files on a USB storage device. The movie list is activated once USB is detected. It is used when playing movie files on TV. Displays the movies in the USB folder and supports Play. Allows playback of all movies in the folder and user desired files.
Page 50
TO USE A USB DEVICE Screen Components MENU Select U U S S B B . Moves to upper level folder Current page/Total pages Total number of marked movie title Corresponding buttons on the remote control Select M M o o v v i i e e L L i i s s t t . Movie List Page 2/3 No Marked...
Page 51
Movie Selection and PopUp Menu Movie List No Marked Page 2/3 movie Title Up Folder 1:340, 120KB Up Folder Navigation Popup Menu Page Change Movie List Page 2/3 No Marked movie Title Up Folder 1:340, 120KB Up Folder Navigation Popup Menu Page Change Select the target folder or drive.
Page 52
TO USE A USB DEVICE Using the Movie List function, play Subtitle Language Latin1 English, Spanish, French, German, Italian, Swedish, Finnish, Dutch, Portuguese, Danish, Romanian, Norwegian, Albanian, Gaelic, Welsh, Irish, Catalan,Valencian Latin2 Bosnian, Polish, Croatian, Czech, Slovak, Slovenian, Serbian, Hungarian Latin4 Estonian, Latvian, Lithuanian Cyrillic...
DIVX REGISTRATION CODE Confirm the DivX registration code number of the TV. Using the registration number, movies can be rented or purchased at www.divx.com/vod. With a DivX registration code from other TV, playback of rented or purchased DivX file is not allowed. (Only DivX files matched with the registration code of the purchased TV are playable.) Move Photo List...
TO USE A USB DEVICE DEACTIVATION The purpose of deactivation is to allow deactivation of devices for users who have activated all the available devices through the web_server and are blocked from activating more devices. DivX VOD allowed the consumer to activate up to 6 devices under one account, but to replace or deactivate any of those devices, the consumer had to contact DivX Support and request deletion.
EPG (ELECTRONIC PROGRAMME GUIDE) This system has an Electronic Programme Guide (EPG) to help your navigation through all the possible viewing options. The EPG supplies information such as programme listings, start and end times for all available services. In addition, detailed information about the programme is often available in the EPG (the availability and amount of these programme details will vary, depending on the particular broadcaster).
EPG (ELECTRONIC PROGRAMME GUIDE) Button Function in 8 Day Guide Mode Change EPG mode. Enter Date setting mode. GREEN GREEN Enter Timer Record/Remind setting YELL YELL mode. Enter Timer Record/Remind list mode. BLUE BLUE The EPG will disappear after moving to a selected program.
Button Function in Extended Description Box Text Up/Down. Enter Timer Record/Remind setting mode. YELL YELL The detail information on or off. INFO BACK Switch off EPG. GUIDE Button Function in Record/Remind Setting Mode Sets a start or end time for recording, and sets only a start time for the reminder with the end time grayed out. Change to Guide or Schedule mode.
PICTURE CONTROL PICTURE SIZE (ASPECT RATIO) CONTROL You can watch the screen in various picture formats; 16:9, Just Scan, Original, Full Wide, 4:3, 14:9, Zoom and Cinema Zoom. If a fixed image is displayed on the screen for a long time, that fixed image may become imprinted on the screen and remain visible.
Page 59
• 4 4 : : 3 3 The following selection will allow you to view a picture with an original 4:3 aspect ratio, gray bars will appear on both the left and right of the screen. • 1 1 4 4 : : 9 9 You can view a picture format of 14:9 or a general TV programme in the 14:9 mode.
PICTURE CONTROL PICTURE WIZARD This feature lets you adjust the picture quality of the original image. Use this to calibrate the screen quality by adjusting the Black and White Level etc. General users can calibrate the screen quality by easily following each stage. When you adjust the image to Low, Recommended or High, you can see the changed result as an example.
ENERGY SAVING It reduces the TV’s power consumption. The default factory setting is adjusted to the comfortable level to be viewed at home. You can increase the brightness of your screen by adjusting the E E n n e e r r g g y y S S a a v v i i n n g g l l e e v v e e l l or by setting the P P i i c c t t u u r r e e M M o o d d e e .
PICTURE CONTROL PRESET PICTURE SETTINGS Picture Mode-Preset V V i i v v i i d d Strengthen the contrast, brightness, colour and sharpness for vivid picture. S S t t a a n n d d a a r r d d The most general screen display status.
MANUAL PICTURE ADJUSTMENT Picture Mode-User option L L i i g g h h t t This is the function to adjust the brightness of the screen by adjusting the Light of the Menu. Adjusting the light when setting the brightness of the set is recommended. C C o o n n t t r r a a s s t t Adjusts the signal level between black and white in the picture.
PICTURE CONTROL PICTURE IMPROVEMENT TECHNOLOGY You can calibrate the screen for each Picture Mode or set the video value according to the special video screen. You can set the video value differently for each input. To reset to the factory default screen after making adjustments to each video mode, execute the “Picture Reset” function for each Picture Mode.
EXPERT PICTURE CONTROL By segmenting categories, E E x x p p e e r r t t 1 1 and E E x x p p e e r r t t 2 2 provide more categories which users can set as they see fit, offering the optimal picture quality for users.
Page 66
PICTURE CONTROL Colour Temperature [Advanced Control] (Warm/Medium/Cool) Dynamic Contrast (Off/Low/Medium/High) Dynamic Colour (Off/Low/High ) Noise Reduction (Off/Low/Medium/High) Gamma (Low/Medium/High) Black Level (Low/High/Auto) Real Cinema (On/Off) TruMotion 100Hz (Off/Low/High ) Choose one of three automatic colour adjustments. Set to warm to enhance hot- ■...
Page 67
S S t t a a n n d d a a r r d d : Mode to reproduce original colour according to the standard of • Colour Gamut input signal independent of the display characteristics. (Wide/Standard) W W i i d d e e : : Mode to use and set the rich colour area of the display. •...
PICTURE CONTROL PICTURE RESET Settings of the selected picture modes return to the default factory settings. PICTURE MENU Select P P I I C C T T U U R R E E . Select P P i i c c t t u u r r e e R R e e s s e e t t . Select Y Y e e s s or N N o o .
DEMO MODE DEMO MODE Display the slide show to explain the various logo of this TV. It is not possible to use D D e e m m o o M M o o d d e e in H H o o m m e e U U s s e e mode. In S S t t o o r r e e D D e e m m o o , D D e e m m o o M M o o d d e e is automatically set to O O n n .
PICTURE CONTROL MODE SETTING We recommend setting the TV to “H H o o m m e e U U s s e e ” mode for the best picture in your home environment. “S S t t o o r r e e D D e e m m o o ” mode is an optimal setting for displaying at stores.. OPTION Input Label SIMPLINK...
SOUND & LANGUAGE CONTROL AUTO VOLUME LEVELER AVL automatically remains on the same level of volume if you change programmes. Because each broadcasting station has its own signal conditions, volume adjustment may be needed every time the channel is changed. This feature allows users to enjoy stable volume levels by making automatic adjustments for each program.
SOUND & LANGUAGE CONTROL CLEAR VOICE II By differentiating the human sound range from others, it helps users listen to human voices better. AUDIO Auto Volume : Off Clear Voice II Clear Voice II : Off : Off • Level Balance Sound Mode : Standard...
PRESET SOUND SETTINGS-SOUND MODE You can select your preferred sound setting; Standard, Music, Cinema, Sport or Game and you can also adjust the Treble, Bass. Sound Mode lets you enjoy the best sound without any Special adjustment as the TV sets the appropriate sound options based on the programme content.
I I n n f f i i n n i i t t e e S S o o u u n n d d : : Infinite Sound is a patented LG proprietary sound processing technology that strives immersive 5.1 surround sound impression with front two loudspeakers.
BALANCE You can adjust the sound balance of the speakers to preferred levels. AUDIO Move Auto Volume : Off Clear Voice II : Off • Level Balance Balance Sound Mode : Standard • Infinite Sound : Off • Treble • Bass MENU Select A A U U D D I I O O .
SOUND & LANGUAGE CONTROL AUDIO RESET Settings of the selected Sound Mode return to the default factory settings. AUDIO Balance Sound Mode : Standard • Infinite Sound • Treble • Bass • Reset • Reset Audio Description :On •Volume Select A A U U D D I I O O . MENU Select R R e e s s e e t t .
AUDIO DESCRIPTION This function is for the blind, and provides explanatory audio describing the current situation in a TV programme in addition to the basic audio. When Audio Description On is selected, basic audio and Audio Description are provided only for those programmes that have Audio Description included.
SOUND & LANGUAGE CONTROL I/II Stereo/Dual Reception (In Analogue Mode Only) When a programme is selected, the sound information for the station appears with the programme number and station name. Q.MENU Select A A u u d d i i o o . Select the sound output.
NICAM Reception (In Analogue Mode Only) If the TV is equipped with a receiver for NICAM reception, high quality NICAM (Near Instantaneous Companding Audio Multiplex) digital sound can be received. Sound output can be selected according to the type of broadcast received. When NICAM mono is received, you can select N N I I C C A A M M M M O O N N O O or F F M M M M O O N N O O .
SOUND & LANGUAGE CONTROL ON-SCREEN MENU LANGUAGE / COUNTRY SELECTION The installation guide menu appears on the TV screen when it is switched on for the first time. S elect your desired language. S elect your country. * * I I f f y y o o u u w w a a n n t t t t o o c c h h a a n n g g e e L L a a n n g g u u a a g g e e / / C C o o u u n n t t r r y y s s e e l l e e c c t t i i o o n n MENU Select O O P P T T I I O O N N .
LANGUAGE SELECTION The Audio function allows selection of a preferred language. If audio data in a selected language is not broadcast, the default language audio will be played. Use the Subtitle function when two or more subtitle languages are broadcast. If subtitle data in a selected lan- guage is not broadcast, the default language subtitle will be displayed.
TIME SETTING CLOCK SETUP The clock is set automatically when receiving a digital signal. (You can set the clock manually only if the TV has no DTV signal.) You must set the time correctly before using on/off timer function. When you select a Time Zone city, the TV time is set by the time offset information based on Time Zone and GMT (Greenwich Mean Time) which is received with the broadcast signal and the time is set automatically by a digital signal.
AUTO ON/OFF TIME SETTING The Off time function automatically switches the TV to standby at a preset time. Two hours after the TV is switched on by the on time function it will automatically switch back to standby mode unless a button has been pressed. The Off time function overrides the On time function if both are set to the same time.
TIME SETTING SLEEP TIMER SETTING You do not have to remember to switch the TV off before you go to sleep. The sleep timer automatically switches the TV to standby after the preset time has elapsed. Select S S l l e e e e p p T T i i m m e e r r . Q.MENU Select O O f f f f , 1 1 0 0 , 2 2 0 0 , 3 3 0 0 , 6 6 0 0 , 9 9 0 0 , 1 1 2 2 0 0 , 1 1 8 8 0 0 or 2 2 4 4 0 0 m m i i n n ..
PARENTAL CONTROL / RATINGS SET PASSWORD & LOCK SYSTEM Enter the password, press ‘0’ , ‘0’ , ‘0’ , ‘0’ on the remote control handset. If a channel is locked, enter the password to unlock it temporarily. LOCK Lock System : Off Lock System Set Password...
PARENTAL CONTROL / RATINGS BLOCK PROGRAMME Blocks any programme that you do not want to watch or that you do not want your children to watch. It is available to use this function in Enter a password to watch a blocked programme. LOCK Lock System Set Password...
PARENTAL CONTROL This function operates according to information from the broadcasting station. Therefore if the signal has incor- rect information, this function does not operate. A password is required to gain access to this menu. This set is programmed to remember which option it was last set to even if you switch the set off. Prevents children from watching certain adult’s TV programmes, according to the ratings limit set.
PARENTAL CONTROL / RATINGS EXTERNAL INPUT BLOCKING Enables you to block an input. It is available to use this function in LOCK Lock System Set Password Block Programme Parental Guidance Input Block Input Block Select L L O O C C K K . MENU Select I I n n p p u u t t B B l l o o c c k k .
KEY LOCK The TV can be set so that the remote control is required to control it. This feature can be used to prevent unau- thorized viewing. OPTION Move Menu Language : English Audio Language : English Subtitle Language : English Hard of Hearing( ) : Off Country...
TELETEXT T T h h i i s s f f e e a a t t u u r r e e i i s s n n o o t t a a v v a a i i l l a a b b l l e e i i n n a a l l l l c c o o u u n n t t r r i i e e s s . . Teletext is a free service broadcast by most TV stations which gives up-to-the-minute information on news, weather, television pro- grammes, share prices and many other topics.
FASTEXT The teletext pages are colour coded along the bottom of the screen and are selected by pressing the correspond- ing coloured button. Page selection Press the T T . . O O P P T T button and then use You can select the pages which are colour coded along the bottom line with corresponding coloured buttons.
DIGITAL TELETEXT *This function works in UK, Ireland only. The TV gives you access to digital teletext which is greatly improved in various aspects such as text, graphics etc. This digital teletext can access special digital teletext services and specific services which broadcast digital teletext. You should select off in the subtitle language menu to display teletext by pressing the SUBTITLE button.
APPENDIX TROUBLESHOOTING T T h h e e T T V V d d o o e e s s n n o o t t o o p p e e r r a a t t e e p p r r o o p p e e r r l l y y . . Check to see if there is any object between the TV and the remote control causing an obstruction.
Page 94
APPENDIX T T h h e e a a u u d d i i o o f f u u n n c c t t i i o o n n d d o o e e s s n n o o t t w w o o r r k k . . Picture OK &...
MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can prolong the life of your new TV. Caution: Be sure to switch the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen A good way to keep the dust off your screen for a while is to wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent.
The specifications shown above may be changed without prior notice for quality improvement. Television System Program Coverage External Antenna Impedance 15EL9 *** 15EL9500-ZA / 15EL950N-ZA 351 mm 235 mm Max 80 mm / Min 43 mm (Screen part Max 8.6 mm / Min 3.2 mm ) 1.6 kg 15EL9 *** : DC 24 V , 1.5 A...
Page 97
LG Electronics at: opensource@lge.com This offer is valid for a period of three (3) years from the date of the distribution of this product by LG Electronics.
Page 98
APPENDIX OPEN SOURCE LICENSE Copyright (C) 1989, 1991 Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. The licenses for most software are designed to take away your freedom to share and change it.
Page 99
1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, pro- vided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty;...
Page 100
APPENDIX If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code.
Page 101
NO WARRANTY 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PRO- GRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WAR- RANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Page 102
APPENDIX GNU LESSER GENERAL PUBLIC LICENSE Copyright (C) 1991, 1999 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
Page 103
Although the Lesser General Public License is Less protective of the users' freedom, it does ensure that the user of a program that is linked with the Library has the freedom and the wherewithal to run that program using a modified ver- sion of the Library.
Page 104
APPENDIX Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Library. In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the Library) on a volume of a storage or distribution medium does not bring the other work under the scope of this License.
Page 105
c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials specified in Subsection 6a, above, for a charge no more than the cost of performing this distribution. d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy the above specified materials from the same place.
Page 106
APPENDIX 13. The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns.
Page 107
MOZILLA PUBLIC LICENSE 1. Definitions. 1.0.1. "Commercial Use" means distribution or otherwise making the Covered Code available to a third party. 1.1. "Contributor" means each entity that creates or contributes to the creation of Modifications. 1.2. "Contributor Version" means the combination of the Original Code, prior Modifications used by a Contributor, and the Modifications made by that particular Contributor.
Page 108
APPENDIX (b) under Patents Claims infringed by the making, using or selling of Original Code, to make, have made, use, practice, sell, and offer for sale, and/or otherwise dispose of the Original Code (or portions thereof). (c) the licenses granted in this Section 2.1(a) and (b) are effective on the date Initial Developer first distributes Original Code under the terms of this License.
Page 109
(b) Contributor APIs. If Contributor's Modifications include an application programming interface and Contributor has knowledge of patent licenses which are reasonably necessary to implement that API, Contributor must also include this infor- mation in the LEGAL file. (c) Representations. Contributor represents that, except as disclosed pursuant to Section 3.4(a) above, Contributor believes that Contributor's Modifications are Contributor's original creation(s) and/or Contributor has sufficient rights to grant the rights conveyed by this License.
Page 110
APPENDIX 6.3. Derivative Works. If You create or use a modified version of this License (which you may only do in order to apply it to code which is not already Covered Code governed by this License), You must (a) rename Your license so that the phrases "Mozilla", "MOZILLAPL", "MOZPL", "Netscape", "MPL", "NPL"...
Page 111
10. U.S. GOVERNMENT END USERS. The Covered Code is a "commercial item," as that term is defined in 48 C.F.R. 2.101 (Oct. 1995), consisting of "commercial computer software" and "commercial computer software documentation," as such terms are used in 48 C.F.R.
Page 112
Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service. Model : Serial No. : Trade Mark of the DVB Digital Video Broadcasting Project (1991 to 1996)