Table of Contents
Advertisement
34
System Setting
[AUDIO] Menu
Each disc has a variety of audio output options. Set
the player's Audio options according to the type of
audio system you use.
,
Note
Since many factors affect the type of audio
output, see "Audio Output Specifications" on
pages 88-89 for details.
HDMI / Digital Output
Select the output sound format when a device
equipped with a HDMI or Digital Audio input jack
is connected to the HDMI OUT or DIGITAL AUDIO
3
OUT jack on this player.
[PCM Stereo]
Select if you connect this unit's HDMI OUT or
DIGITAL AUDIO OUT jack to a device with two-
channel digital stereo decoder.
[PCM Multi-Ch] (HDMI only)
Select if you connect this unit's HDMI OUT jack
to a device with multi-channel digital decoder.
[DTS Re-Encode]
Select if you connect this unit's HDMI OUT or
DIGITAL AUDIO OUT jack to a device with a DTS
decoder.
[Primary Pass-Thru]
Select if you connect this unit's DIGITAL AUDIO
OUT and HDMI OUT jack to a device with
LPCM, Dolby Digital, Dolby Digital Plus, Dolby
TrueHD, DTS and DTS-HD decoder.
,
Note
y When [HDMI] option is set to [PCM Multi-
Ch], the audio may output as PCM Stereo
if the PCM Multi-Ch information is not
detected from HDMI device with EDID.
y If the [HDMI] or [Digital Output] option is
set to [DTS re-encode], the DTS Re-encode
audio is output for BD-ROM discs with
secondary audio and the original audio is
output for the other discs (like [Primary Pass-
Thru]).
Sampling Freq.
(Digital Audio Output)
[192 kHz]
Select this if your A/V Receiver or Amplifier is
capable of handling 192 kHz signals.
[96 kHz]
Select this if your A/V Receiver or Amplifier is
not capable of handling 192 kHz signals. When
this choice is made, this unit
automatically converts any 192 kHz signals to
96 kHz so your system can decode them.
[48 kHz]
Select this if your A/V Receiver or Amplifier is
not capable of handling 192 kHz and 96 kHz
signal. When this choice is made, this unit
automatically converts any 192 kHz and 96 kHz
signals to 48 kHz so your system can decode
them.
Check the documentation for your A/V Receiver or
Amplifier to verify its capabilities.
DRC (Dynamic Range Control)
This function allows you to listen to a movie at a
lower volume without losing clarity of sound.
[Off]
Turns off this function.
[On]
Compress the dynamic range of the Dolby
Digital, Dolby Digital Plus or Dolby TrueHD
audio output.
[Auto]
The dynamic range of the Dolby TrueHD audio
output is specified by itself.
And the dynamic range of the Dolby Digital
and Dolby Digital Plus are operated as same as
the [On] mode.
,
Note
The DRC setting can be changed only when a
disc is not inserted or the unit is in complete
stop mode.
- Quick Links:
- Recording Tv Programmes
Hide quick links:
Advertisement
Table of Contents
