Table of Contents
Advertisement
Quick Links
User Manual
S27R75* S32R75*
The color and the appearance may differ depending on the product, and the specifications are subject to change without
prior notice to improve the performance.
The contents of this manual are subject to change without notice to improve quality.
© Samsung Electronics
Samsung Electronics owns the copyright for this manual.
Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited.
Trademarks other than that of Samsung Electronics are owned by their respective owners.
Advertisement
Table of Contents
Related Manuals for Samsung S27R754Q
Summary of Contents for Samsung S27R754Q
- Page 1 © Samsung Electronics Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. Trademarks other than that of Samsung Electronics are owned by their respective owners.
-
Page 2: Table Of Contents
Control Panel Screen Setup Direct Key Guide Adjusting OSD (On Screen Function Key Guide Display) settings SAMSUNG MAGIC Bright Configuring Eye Saver Mode, Brightness and Contrast from Direct Key Guide Brightness Transparency Types of Ports Upgrading the Software via USB... - Page 3 Responsibility for the Pay Service (Cost to Troubleshooting Guide Off Timer Plus Customers) Not a product defect PC/AV Mode Requirements Before Contacting Samsung Customer A Product damage caused by customer's fault Service Center Source Detection Others Product diagnosis (Screen issue)
-
Page 4: Before Using The Product
Chapter 01 Before Using the Product Securing the Installation Space Safety Precautions Warning Make sure to have enough space for ventilation when placing the product. An internal temperature rise A serious or fatal injury may result if instructions are not followed. may cause fire and damage the product. -
Page 5: Cleaning
High-glossy models can develop white stains on the surface if an ultrasonic wave humidifier is used Warning nearby. ― Contact your nearest Samsung Customer Service Center if you want to clean the inside of the product • Do not use a damaged power cord or plug, or a loose power socket. -
Page 6: Installation
• Do not install the product within the reach of young children. ‒ Be sure to consult Samsung Customer Service Center if you want to install the product at such a ‒ The product may fall and injure children. place. -
Page 7: Operation
There is a high voltage inside the product. Never disassemble, repair or modify the product ‒ Be sure to power off the product and disconnect the power cord when water or other foreign yourself. substances have entered the product. Then contact Samsung Customer Service Center. ‒ Contact Samsung Customer Service Center for repairs. •... - Page 8 Caution • Leaving the screen fixed on a stationary image for an extended period of time may cause • Insert the power plug into the AC/DC adapter until a click sound is heard. afterimage burn-in or defective pixels. • Do not insert only the power plug into the power outlet. ‒...
- Page 9 • Do not hold the product upside-down or move it by holding the stand. ‒ The product may fall and become damaged or cause an injury. • Looking at the screen too close for an extended period of time can deteriorate your eyesight. •...
-
Page 10: Preparations
Chapter 02 Preparations Parts Parts Description Multi directional button that helps navigate. JOG Button ― The JOG button is located on the rear left side of the product. The button can be used to move up, down, left or right, or as Enter. Control Panel This LED is power status indicator and works as ―... -
Page 11: Direct Key Guide
Direct Key Guide ― On the Direct Key Guide screen, the following menu options appear when the product screen is switched on or the input source is changed. Eye Saver Mode Features Eye Saver ModeOff • UP/DOWN: Adjust Brightness, Contrast, Eye Saver Mode. -
Page 12: Function Key Guide
Function Key Guide ― To use the Function Key Guide, press the JOG button. Then the following window appears. UP/DOWN/LEFT/RIGHT: Move to the item you want. The description for each item will appear when the focus changes. PRESS(ENTER): The selected item will be applied. Return Parts Description... -
Page 13: Configuring Eye Saver Mode, Brightness And Contrast From Direct Key Guide
Action ― The default brightness can vary depending on the region. UP/DOWN Move the option Brightness Exit the menu. ― This menu is not available when SAMSUNG Bright is set to Dynamic Contrast mode. MAGIC LEFT Close Sublist without saving value. -
Page 14: Types Of Ports
Types of Ports Port Description Use a USB memory stick to perform software upgrade. SERVICE ― The functions available may vary depending on the product model. The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Refer to the Connects to a PC using a MINI DP cable. -
Page 15: Upgrading The Software Via Usb
Upgrading the Software via USB When the message as shown in the following figure is displayed on the product, select upgrade the software. Connect a USB memory to the SERVICE port shown in the figure. Do you want to update via USB? SERVICE When the screen as shown in the following figure is displayed, select Yes. - Page 16 Note To perform software upgrade by using a USB memory, first format the USB memory to FAT32. When performing upgrade, make sure that only one BIN file (.bin) is saved in the root directory. To upgrade the software for the SR75 model, make sure the upgrade files are .bin formats. The file name should follow the naming conventions for the SR75 model (e.g.
-
Page 17: Adjusting The Product Tilt And Height
Adjusting the Product Tilt and Height Do not use or store the product with the screen facing down. ― The color and shape of parts may differ from what is shown. Specifications are subject to change without 18 ~ 60˚ notice to improve quality. -
Page 18: Precautions For Moving The Product
Precautions for moving the product • Do not directly apply pressure on the screen. • Do not hold the product upside down only by the stand. • Do not hold the screen when moving the product. • Hold the lower corners or edges of the product when moving it. -
Page 19: Precautions For Installation And Use
Precautions for installation and use • If the product is set up close to a wall and you tilt the stand to raise it up, the product may collide with the wall and become ≤40 mm 30 ~ 65 mm 55 ~ 90 mm damaged. -
Page 20: Installing The Stand On A Table
Installing the stand on a table Table requirements for installing the stand are shown below by table type. • Table with no raised edge • Table with a raised edge ( The stand can be installed if a 90 mm space is •... -
Page 21: Installation
Installation Attaching the Stand ― Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. ― The exterior may differ depending on the product. ― The table should be relocated, depending on the space where the stand will be installed. ―... -
Page 22: Removing The Stand
Removing the Stand ― Before removing the stand from the product, place the product on a flat and stable surface with the screen facing down. ― The exterior may differ depending on the product. ― The table should be relocated, depending on the space where the stand will be installed. Caution Before placing the product facing down to the table, put a cushion on the table to protect the... -
Page 23: Tidying Up The Connected Cables
Tidying Up the Connected Cables Connect the Y cables to the two ports, as shown in the figure. Tidy up the connected Y cable by aligning it with the stand groove, as shown in the figure. ― Make sure the Y cable is tidied up at the left of the groove. -
Page 24: Connecting And Using A Source Device
HDMI IN. Make sure that the graphics card of the HDMI source supports 3840 x 2160 @ 60 Hz. ― When connecting an HDMI cable, use the cable that came with the components of the product. If you use an HDMI cable other than provided by Samsung, the image quality may be degraded. -
Page 25: Connection Using The Mini Dp Cable
Connection Using the MINI DP Cable Connecting the Power First make sure that the power cables for product and other devices (e.g. PC, settop box, etc.) are removed. MINI DP IN ― S27R75*: To display 2560 x 1440 @ 144 Hz, use a MINI DP cable that supports 2560 x 1440 @ 144 Hz. Make sure that the graphics card of the MINI DP source supports 2560 x 1440 @ 144 Hz. -
Page 26: Correct Posture To Use The Product
Driver Installation ― You can set the optimum resolution and frequency for this product by installing the corresponding drivers. ― To install the latest version of the product driver, download it from the Samsung Electronics website at http://www.samsung.com. Setting Optimum Resolution An information message about setting optimum resolution will appear if you power on the product for the first time after purchase. -
Page 27: Screen Setup
Custom: Customize the contrast and brightness as required. • Standard: Obtain a picture quality suitable for editing documents or using Internet. SAMSUNG MAGIC Bright • Cinema: Obtain the brightness and sharpness of TVs suitable for enjoying video and DVD content. -
Page 28: Brightness
You can adjust the general brightness of the picture. (Range: 0~100) Adjust the tint of the screen. ― This menu is not available when A higher value will make the picture appear brighter. SAMSUNG Bright is set to Cinema Dynamic Contrast mode. -
Page 29: Samsung Magic Upscale
SAMSUNG MAGIC Upscale Eye Saver Mode Upscale function can enhance the layers of the picture details and the vividness of the picture. Set to an optimum picture quality suitable for eye relaxation. SAMSUNG MAGIC The function has more obvious effects on low-resolution pictures. -
Page 30: Picture Size
Picture Size Screen Adjustment ― This option is only available when Change the picture size. PC/AV Mode is set to AV. ― This menu is only available when ― This menu is not available when Picture Size is set to Screen Fit Mode. -
Page 31: Configuring The Pip/Pbp Settings
Chapter 05 Configuring the PIP/PBP Settings Function Key Guide → → PIP/PBP A detailed description of each function is provided. Refer to your product for details. ― The functions available may vary depending on the product model. The color and shape of parts may differ ―... -
Page 32: Size
Size Picture Size Select the size and aspect ratio of the sub-screen. Select the image size for each screen. • S27R75*: PBP Mode (available in PBP mode(Size • S32R75*: mode Position • Auto: Display the picture according to the aspect ratio of the each screen input source. •... -
Page 33: Contrast
Contrast PIP Mode (available in PIP mode (Size • S27R75*: • S32R75*: PBP Mode (available in PBP mode(Size mode Adjust the contrast level for each screen. • Auto: Display the picture according to the aspect ratio of the each screen input source. •... -
Page 34: Adjusting Osd (On Screen Display) Settings
Chapter 06 Adjusting OSD (On Screen Display) settings Function Key Guide → → On Screen Display A detailed description of each function is provided. Refer to your product for details. ― The functions available may vary depending on the product model. The color and shape of parts may differ Position from what is shown. -
Page 35: Setup And Reset
Chapter 07 Setup and Reset Function Key Guide → → System A detailed description of each function is provided. Refer to your product for details. ― The functions available may vary depending on the product model. The color and shape of parts may differ Select when the following screen is prompted. -
Page 36: Displayport Ver
• You will see the following screen when you select Yes. Self Diagnosis Complete HDMI Mode Contact the Samsung Call Center for assistance. Please have the following information ready: Select the HDMI mode to use. ‐ Model Code: ************** ― The supportable device and resolution may differ depending on its version. -
Page 37: Freesync (S27R75*)
The sound quality of the monitor may be degraded. ― If you encounter any issues when using the function, contact the Samsung Service Center. ― If you change the screen resolution while the function is On, the screen may intermittently blank out due to the graphi card. -
Page 38: Eco Saving Plus
Eco Saving Plus Off Timer Plus Reduce energy consumption compared to consumption at the maximum brightness level. Configuring Off Timer ― This option is not available when SAMSUNG Bright is in Dynamic Contrast mode. MAGIC ― This menu is not available when... -
Page 39: Pc/Av Mode
PC/AV Mode Key Repeat Time PC/AV Mode to AV. The picture size will be enlarged. Control the response rate of a button when the button is pressed. This option is useful when you view a movie. Acceleration, sec, or 2 sec can be selected. -
Page 40: Information
Chapter 08 Information Function Key Guide → → Information A detailed description of each function is provided. Refer to your product for details. ― The functions available may vary depending on the product model. The color and shape of parts may differ from what is shown. -
Page 41: Installing The Software
At least 60MB of free space on the hard disk drive • Windows 8.1 32Bit/64Bit Easy Setting Box enables users to use the product by partitioning multiple sections. To install the latest version of Easy Setting Box, download it from the Samsung Electronics website at • Windows 10 32Bit/64Bit http://www.samsung.com. -
Page 42: Troubleshooting Guide
Check the following. Customer Service Center Installation issue ― Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Customer Service Center. The screen keeps switching on and off. Check the cable connection between the product and PC, and ensure the connectors are locked. - Page 43 The message Check the cable connection and the settings of the source device. appears. There is no image on the screen and the power LED blinks every 0.5 to 1 second. Check that the cable is properly connected to the product. The product is operating in power-saving mode.
-
Page 44: Q & A
Q & A ― Refer to the user manual for your PC or graphics card for further instructions on adjustment. How can I change the frequency? Set the frequency on your graphics card. • Windows 7: Go to Control Panel → Appearance and Personalization → Display → Screen Resolution → Advanced settings → Monitor, and adjust Screen Refresh Rate under Monitor settings. •... -
Page 45: Specifications
― This device is a Class B digital apparatus. Maximum Pixel Clock 594 MHz (HDMI) ― For detailed device specifications, visit the Samsung Electronics website. Power Supply AC100-240V~ 50/60Hz Based on the AC voltage of the adapter. For the DC voltage of the (USA only) product, refer to the product label. -
Page 46: Standard Signal Mode Table
Standard Signal Mode Table Model Name S27R75* S32R75* Synchronization Horizontal Frequency 70.56 ~ 214.56 kHz 147.78 ~ 148.38 kHz Vertical Frequency 48 ~ 144 Hz (DisplayPort / HDMI) 60 Hz (DisplayPort / HDMI) Resolution Optimum Resolution 2560 x 1440 @ 144 Hz (DisplayPort / HDMI) 3840 x 2160 @ 60 Hz (DisplayPort / HDMI) Maximum Resolution If a signal that belongs to the following standard signal modes is transmitted from your PC, the screen will automatically be adjusted. - Page 47 DisplayPort (S27R75*) Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) VESA DMT, 1280 x 800 49.702 59.810 83.500 VESA DMT, 1280 x 1024 63.981 60.020 108.000 VESA DMT, 1280 x 1024 79.976 75.025 135.000 VESA DMT, 1440 x 900 55.935 59.887 106.500...
- Page 48 HDMI (S27R75*) Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) VESA DMT, 1024 x 768 56.476 70.069 75.000 VESA DMT, 1024 x 768 60.023 75.029 78.750 VESA DMT, 1152 x 864 67.500 75.000 108.000 VESA DMT, 1280 x 720 45.000 60.000 74.250...
- Page 49 DisplayPort (S32R75*) Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) MAC, 832 x 624 49.726 74.551 57.284 VESA, 1024 x 768 48.363 60.004 65.000 VESA, 1024 x 768 56.476 70.069 75.000 VESA, 1024 x 768 60.023 75.029 78.750...
- Page 50 HDMI (S32R75*) Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) MAC, 832 x 624 49.726 74.551 57.284 VESA, 1024 x 768 48.363 60.004 65.000 VESA, 1024 x 768 56.476 70.069 75.000 VESA, 1024 x 768 60.023 75.029 78.750...
-
Page 51: Appendix
• Use of supplies or separately sold product unspecified by Samsung. • Repair from a person besides an engineer of outsourcing service company or partner of Samsung Not a product defect Electronics Co., Ltd. •...