Installing On A Wall - LG 43SM3D Owner's Manual

Monitor signage

Hide thumbs Also See for 43SM3D:

Table of Contents

Installing on a Wall

For proper ventilation, allow a clearance of 100 mm on each side and from the wall. Detailed installation instructions

are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide.

To install your monitor on a wall, attach a wall mounting bracket (optional part) to the back of the monitor.

Make sure that the wall mounting bracket is securely fixed to the monitor and to the wall.

Use only screws and wall mounting brackets that conform to VESA standards.

Screws which are longer than standard length may damage the inside of the monitor.

A non-VESA standard screw may damage the product and cause the monitor to fall. LG Electronics is not liable for

any accidents related to the use of non-standard screws.

Please use VESA standard as below.

•

785 mm and above

* Fixing screws: Diameter 6.0 mm x Pitch 1.0 mm x Length 12 mm

100 mm

785 mm

100 mm

Table of Contents

43sm5d 49sm5d 55sm5d 65sm5d 32sm5d 49sm3d ... Show all