Makita 9565PZ Instruction Manual
Hide thumbs
Also See for 9565PZ:
- Instruction manual (77 pages) ,
- Instruction manual (80 pages) ,
- Instruction manual (129 pages)
Related Manuals for Makita 9565PZ
Summary of Contents for Makita 9565PZ
- Page 1 INSTRUCTION MANUAL Angle Grinder 9564P 9565P 013574 DOUBLE INSULATION IMPORTANT: Read Before Using.
-
Page 2: Specifications
ENGLISH (Original instructions) SPECIFICATIONS Model 9564P 9565P Depressed center wheel diameter 115 mm 125 mm Max. wheel thickness 6.4 mm Spindle thread Rated speed (n)/ No load speed (n 12,000 min Overall length 307 mm Net weight 2.3 kg 2.4 kg Safety class •... -
Page 3: Grinder Safety Warnings
Do not abuse the cord. Never use the cord for 19. Do not use the power tool if the switch does carrying, pulling or unplugging the power tool. not turn it on and off. Any power tool that Keep cord away from heat, oil, sharp edges or cannot be controlled with the switch is dangerous moving parts. - Page 4 was not designed may create a hazard and cause 10. Hold the power tool by insulated gripping personal injury. surfaces only, when performing an operation Do not use accessories which are not where the cutting accessory may contact specifically designed and recommended by hidden wiring or its own cord.
- Page 5 c) Do not position your body in the area where b) Do not position your body in line with and power tool will move if kickback occurs. behind the rotating wheel. When the wheel, at Kickback will propel the tool in direction opposite the point of operation, is moving away from your to the wheel’s movement at the point of snagging.
-
Page 6: Functional Description
types of wheels and the use of such a product FUNCTIONAL DESCRIPTION may result in serious personal injury. 19. Be careful not to damage the spindle, the flange (especially the installing surface) or the CAUTION: lock nut. Damage to these parts could result Always be sure that the tool is switched off and •... - Page 7 For tool with clamp lever type wheel guard ASSEMBLY 1. Wheel guard 2. Bearing box CAUTION: 3. Screw Always be sure that the tool is switched off and • 4. Lever unplugged before carrying out any work on the tool. Installing side grip (handle) 008375 1.
-
Page 8: Operation
and securely tighten clockwise. To remove the wheel, CAUTION: follow the installation procedure in reverse. Never switch on the tool when it is in contact with • the workpiece, it may cause an injury to operator. 1. Lock nut wrench Always wear safety goggles or a face shield during •... - Page 9 Operation with abrasive cut-off / diamond wheel (optional accessory) 1. Lock nut 2. Abrasive cut-off wheel/diamond wheel 3. Inner flange 4. Wheel guard for abrasive cut-off wheel/diamond wheel 010855 The direction for mounting the lock nut and the inner flange varies by wheel thickness. Refer to the table below.
-
Page 10: Maintenance
If you need any assistance for more details regarding or in line with the wire wheel brush. these accessories, ask your local Makita Service Center. Do not use wire wheel brush that is damaged, or Wheel guard (Wheel cover) For depressed center •... - Page 11 Lock nut for depressed center wheel / abrasive • cut-off wheel / flap disc / diamond wheel Lock nut for abrasive disc • Lock nut wrench • Side grip • Rubber pad • Dust cover attachment • NOTE: Some items in the list may be included in the tool •...
- Page 12 Makita Corporation www.makita.com 885184A3...