Table of Contents
Advertisement
14
www.aeg.com
A
B
C
D
E
8. KNOB AND BUTTONS
8.1 Aan/Uit
Pressing this button for a few seconds
allows to activate or deactivate the
appliance. Two different tunes sound
while switching the appliance on or off.
As the Stand-by function automatically
deactivates the appliance to decrease
the energy consumption in a few cases,
you may need to activate the appliance
again.
For more details, refer to Stand-by
paragraph in Daily Use chapter.
8.2 Introduction
The options/functions are
not selectable with all
washing programmes.
Check the compatibility
between options/functions
and washing programmes in
the "Programme Chart". An
option/function can exclude
another one, in this case the
appliance doesn't allow you
to set the incompatible
options/functions together.
Make sure the screen and
touch buttons are always
clean and dry.
The digital indicator can show:
•
Programme duration (e. g.
•
Delay time (e. g.
•
Cycle end ( ).
•
Warning code (
Extra rinse indicator. It lights on when this option is se‐
lected .
The
indicator blink during the laundry load detec‐
tions.
Child safety lock indicator.
Door locked indicator.
8.3 Temperatuur
When you select a washing programme,
the appliance automatically proposes a
default temperature.
Set this option to change the default
temperature.
The indicator
temperature comes on (the appliance
does not heat the water).
8.4 Centrifugeren
When you set a programme, the
appliance automatically sets the
maximum spin speed allowed.
Touch repeatedly this button to:
Activate the Rinse hold
• Set this option to prevent the laundry
creases.
• The related indicator comes on.
• There is a water in the drum when the
programme is completed.
• The door stays locked and the drum
turns regularly to reduce creasing.
• You must drain the water to unlock
the door.
• If you touch the Start/Pauze button,
the appliance performs the spinning
phase and drains the water.
).
or
).
).
= cold water of the set
option
Advertisement
Table of Contents
