Table Of Contents Warning! Safety Instructions Adjusting the Angle of the TV to suit view Preparing Using Remote Control Separate Purchase Troubleshooting 5 LED Clock Specifications 5 Magic Remote Control 6 Wall Mounting Bracket 21 HDMI-DTV supported mode 21 HDMI-PC supported Mode Lifting and moving the TV 22 Supported Photo Formats 22 Supported Audio Formats...
Warning! Safety Instructions • Ventilation - Install your TV where there is proper ventilation. Do not install in a confined space such as a bookcase. - Do not install the product on a carpet or cushion. - Do not block or cover the product with cloth or other materials while unit is plugged in.
Page 4
Unauthorised modification could void the user’s authority to operate this product. • Use only an authorised attachments / accessories approved by LG Electronics. Otherwise, this may result in fire, electric shock, malfunction, or product damage. • Never disassemble the AC adapter or power cord. This may result in fire or electric shock.
Preparing Separate Purchase Separate purchase items can be changed or modified for quality • If the TV is turned on for the first time after it was shipped from the improvement without any notification. Contact your dealer to buy these factory, initialization of the TV may take a few minutes.
Lifting and moving the TV Wall Mounting Bracket Make sure to use screws and wall mount bracket that meet the VESA standard. Standard dimensions for the wall mount kits are described in Please note the following advice to prevent the TV from being scratched the following table.
• Avoid touching the screen at all times, as this may result in • If a television is not positioned in a sufficiently stable damage to the screen. location, it can be potentially hazardous due to falling. Many injuries, particularly to children, can be avoided by taking •...
Attaching the TV to a Desk Using the Kensington security system (Depending on model) The TV should be attached to a desk so it cannot be pulled in a forward/ (Depending on model) backward direction, potentially causing injury or damaging the product. The Kensington security system connector is located at the rear of the TV.
LG recommends that wall mounting be performed by a qualified professional installer. We recommend the use of LG’s wall mount bracket. LG’s wall mount bracket is easy to move with cables connected. When you do not use LG’s wall mount bracket, please use a wall mount bracket where the device is adequately secured to the wall with enough space to allow connectivity to external devices.
Connections • When installing the wall mounting bracket, it is recommended to cover the stand hole using tape, in order to prevent the influx of dust and insects. (Depending on model) Connect various external devices to the TV and switch input modes to select an external device.
Other connections External Devices Available external devices are: Blu-ray player, HD receivers, DVD players, Connect your TV to external devices. For the best picture and audio VCRs, audio systems, USB storage devices, PC, gaming devices, and quality, connect the external device and the TV with the HDMI cable. other external devices.
External Speakers Method of volume control port (Depending on model) (Depending on model) • Cable Spec. Each up/down pins are connected to CPU with pull up resistor respectively. EXTERNAL SPEAKER OUT / UP / DOWN CPU detects STEREO transition from 3.3 V (8 ) level for volume control.
Page 13
Using Button Network (Depending on model) Wired network connection (Depending on model) This TV can be connected to a Pro:Centric server via the port. After You can simply operate the TV functions, using the button. making the physical connection, the TV needs to be set up for network communication.
Adjusting the Angle of the Basic functions TV to suit view Power On (Press) Power Off (Press and Hold) Menu Control (Press (Depending on model) Menu Selection (Press and Hold Swivel 20 degrees to the left or right and adjust the angle of the TV to suit your view.
Using Remote Control * To use the button, press and hold for more than 3 seconds. ** To use the button, press and hold for more than 5 seconds. (Without facing the TV) The descriptions in this manual are based on the buttons on the remote control.
Troubleshooting • Do not mix new batteries with old batteries. This may cause the batteries to overheat and leak. • Failure to match the correct polarities of the battery may cause the battery to burst or leak, resulting in fire, personal The software version can be updated for improvement in performance.
Page 17
Abnormal display • If the product feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is nothing wrong with product. • This panel is an advanced product that contains millions of pixels. You may see tiny black dots and/or brightly coloured dots (red, blue or green) at a size of 1 ppm on the panel.
Specifications (Depending on country) Broadcasting Specifications Digital TV Analogue TV DVB-T/T2 PAL B/B, B/G, D/K, I Television system DVB-S/S2 SECAM B/G, D/K DVB-C NTSC-M DVB-S/S2 DVB-C DVB-T/T2 VHF III: 174 ~ 230 MHz Channel coverage UHF IV: 470 ~ 606 MHz 46 ~ 862 MHz (Band) 950~2,150 MHz...
Page 19
(Only Vietnam) Wireless module (LGSBWAC95) specifications Wireless LAN (IEEE 802.11a/b/g/n/ac) Frequency Range Output Power (Max.) 2,400 to 2,483.5 MHz 17.5 dBm 5,150 to 5,725 MHz 17.5 dBm 5,725 to 5,850 MHz 13.5 dBm Bluetooth Frequency Range Output Power (Max.) 2,400 to 2,483.5 MHz 9 dBm As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is configured for the regional frequency table.
Page 20
Environment condition 0 °C to 40 °C Operating Temperature Portrait : 0 °C to 35 °C Operating Humidity Less than 80 % Storage Temperature -20 °C to 60 °C Storage Humidity Less than 85 % • The energy information provided with the product is indicated in accordance with the regulations of each country. (Depending on Country) - The Energy consumption is measured in accordance with IEC 62087.
HDMI-DTV supported mode HDMI-PC supported Mode • PC audio is not supported. Horizontal Vertical Resolution • Use HDMI IN 1 for PC mode. (Depending on model) Frequency (kHz) Frequency (Hz) 31.46 59.94 Horizontal Vertical 640 x 480p Resolution 31.5 Frequency (kHz) Frequency (Hz) 31.46 59.94...
• ULTRA HD Video: 3840 x 2160, 4096 x 2160 • Some HEVC encoded ULTRA HD videos other than the content Extension Codec officially provided by LG Electronics may not be played. VC-1 Advanced Profile (except for • Some codecs can be supported after a software upgrade. Video WMVA), VC-1 Simple and Main Profiles .asf...
(Depending on model) The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by LG Electronics Inc. is under license. Other trademarks and trade names are those of their respective owners.
IR Codes • This feature is not available for all models. Code (Hexa) Function Code (Hexa) Function (POWER) TIMER Number Key 0-9 Alphabet buttons 10-19 (SPACE) (BACK)
External Control Device ►B Type Setup RS-232C IN (CONTROL & SERVICE) RS-232C Setup (Depending on model) • Image shown may differ from your TV. Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally.
RS-232C Configurations Communication Parameters • Baud rate: 9,600 bps (UART) 7-Wire Configurations • Data length: 8 bits (Standard RS-232C cable) • Parity: None • Stop bit: 1 bit • Communication code: ASCII code • Use a crossed (reverse) cable. Set ID For Set ID number, see “Real Data Mapping”.
Command Reference List • During USB operations such as DivX or EMF, all commands except Power(ka) and Key(mc) are not executed and treated as NG. (Depending on model) Data Transmission / Receiving Protocol Command1 Command2 (Hexadecimal) (Depending on Model) 1 Power 00 to 01 Transmission 2 [Aspect Ratio]...
Page 29
1 Power (Command: k a) 3 Screen Mute (Command: k d) ►To control Power On/Off of the set. ►To select screen mute on/off. Transmission Transmission (k)(a)( )([Set ID])( )([Data])(Cr) (k)(d)( )([Set ID])( )([Data])(Cr) [Data] 00 : [Off] [Data] 00 : Screen mute off (Picture on) / Video mute off [Data] 01 : [On] [Data] 01 : Screen mute on (Picture off) [Data] 10 : Video mute on...
Page 30
6 [Contrast] (Command: k g) 9 [Tint] (Command: k j) ►To adjust screen contrast. ►To adjust the screen tint. You can also adjust contrast in the picture settings. You can also adjust tint in the picture settings. Transmission Transmission (k)(g)( )([Set ID])( )([Data])(Cr) (k)(j)( )([Set ID])( )([Data])(Cr) [Data] Min : 00 to Max : 64 [Data] Red : 00 to Green : 64...
Page 31
12 Remote Control Lock Mode (Command: k m) 15 [Energy Saving] (Command: j q) ►To lock the front panel controls on the monitor and remote control. ►To reduce the power consumption of the TV. You can also adjust Energy Saving in picture settings. Transmission Transmission (k)(m)( )([Set ID])( )([Data])(Cr)
Page 32
17 [Equalizer] (Command : j v) 18 Tune Command (Command: m a) ►To adjust equalizer. ►Select channel to following physical number. Transmission Transmission (j)(v)( )([Set ID])( )([Data])(Cr) (m)(a)( )([Set ID])( )([Data] 00)( )([Data] 01)( )([Data] 02)(Cr) [Data] 00 : High channel data [Data] 01 : Low channel data ex.
Page 33
19 Programme [Skip] / [Add] (Command: m b) 22 Input select (Command: x b) (Main Picture Input) ►To set skip status for the current Programme. ►To select input source for main picture. Transmission Transmission (m)(b)( )([Set ID])( )([Data])(Cr) (x)(b)( )([Set ID])( )([Data])(Cr) [Data] 00 : [Skip] [Data] Structure...
Page 34
23 Programme block/unblock (Command: m d) 24 Fail Over Mode (Command: m i) ►This command may work differently depending on model and ►Selects the Fail Over mode. signal. Transmission Transmission (m)(i)( )([Set ID])( )([Data])(Cr) (m)(d)( )([Set ID])( )([Data] 00)( )([Data] 01)( )([Data] 02)([Data] 03) [Data] 00 : Off ([Data] 04)(Cr) [Data] 01 : Auto...
Page 35
26 Internal storage media contents play (Command: s n, a8) * Real data mapping ►Plays media stored in the internal memory. 00 : Step 0 ►This command may work differently depending on model and signal. Step 10 ([Set ID] 10) Transmission Step 15 ([Set ID] 15) (s)(n)( )([Set ID])( )(a)(8)( )([Data])(Cr)
Page 36
The model and serial number of the product are located on the back and on one side of the product. Record them below in case you ever need service. Model Serial no.