HP StorageWorks 6000 Manual
Hide thumbs
Also See for StorageWorks 6000:
- Software manual (80 pages) ,
- Release note (11 pages) ,
- Release note (7 pages)
Advertisement
Quick Links
HP
StorageWorks
Warning: The node weighs 16.78 kg
(37 lb) full. At least two people are
required to lift and rack mount the node.
Warning: To reduce the risk of personal
injury or damage to the equipment, before
installing equipment be sure that:
• The rack leveling jacks are extended to
the floor.
• The full weight of the rack rests on the
leveling jacks.
• The stabilizing feet are attached to the
rack if it is a single-rack installation.
• The racks are coupled together in
multiple-rack installations.
• Only one component is extended at a
time. A rack may become unstable if
more than one component is extended
for any reason.
1
Inspect the box contents.
You will also need a Phillips screwdriver.
1 Node
2 Node power cord
3 Serial cable
4 1U rack mounting hardware kit
and documentation
5 Printed VLS node installation poster
6 Documentation CD and VLS Recovery CD
6000
Virtual Library
System Node
Installation
1
Caution: Make sure that the rack and all
equipment mounted in the rack has a
reliable ground connection. Verify that the
total current of the rack components does
not exceed the current rating of the power
distribution unit or outlet receptacles.
Caution: Parts can be damaged by
electrostatic discharge. Keep parts in their
containers until needed. Ensure that you
are properly grounded when touching
static sensitive components.
Rack requirements:
HP supports the HP System E racks and the
HP 10000 Series racks for use with the virtual
library system (VLS). Other racks might also be
suitable, but have not been tested with the VLS.
4
*AF728-96001*
AF728-96001
2
3
5
6
Advertisement
Related Manuals for HP StorageWorks 6000
Summary of Contents for HP StorageWorks 6000
- Page 1 • The racks are coupled together in Rack requirements: multiple-rack installations. HP supports the HP System E racks and the • Only one component is extended at a HP 10000 Series racks for use with the virtual time. A rack may become unstable if library system (VLS).
- Page 2 Select a rack location that meets the space, airflow, temperature, power, and electrical grounding requirements described in the HP StorageWorks 6000 Virtual Library System User Guide. For adequate airflow within the rack, use appropriate high airflow inserts in rack cabinet doors and observe industry...
- Page 3 Cabling Connect Fibre Channel cables from your SAN media server to the node Fibre Channel host ports, starting with Fibre Channel host port 0 and working towards Fibre Channel host port 3. Leave the Fibre Channel loopback plug in any unused Fibre Channel host port(s).
- Page 4 Set the VLS network settings (IP address, • The HP StorageWorks 6000 Virtual Library DNS server, host name, and so on) as described in the “Configuration” section of...