Table of Contents
Advertisement
Operation Manual / A150-M56/66/57/67 - A155-M..
12 Dismantling and fitting, special tools for fastening strips / 12.1 Ap-
plication, special tools
4. Tighten the two nuts on the other side by using the spanner holder (90166).
The cartridge group is fitted at this point in time. To enable a clear representation of the
work step, the cartridge group is not illustrated in work step 5.
Fig. 111: Fitting the bottom fastening strip
Product
A150-M
A155-M
Table 69: Tightening torque (51007) with spanner holder
5. Fit the nuts (51007) with spanner holder (90165 / 90166) and attached torque span-
ner (02). Observe the tightening torque.
© Copyright 2021 ABB. All rights reserved.
Size
Tightening torque [Nm]
M16
M16
HZTL4032_EN
85
70
Rev.Q
January 2021
Advertisement
Chapters
Table of Contents
