Related Manuals for Haier L26A5A
Summary of Contents for Haier L26A5A
- Page 1 OWNER`S MANUAL Please READ this manual carefully before operating your TV, and retain it for future reference. LCD TV MODEL : L26A5A L32A5A L37A5A L42A5A...
-
Page 2: Warning
Congratulations on your purchase, and welcome to the family ! Dear Haier product owner: Thank you for your confidence in Haier. You`ve selected one of the best-built, best-backed products available today. We`ll do everything in our power to keep you happy with your purchase for many years to come. -
Page 3: Important Safety Instructions
Important Safety Instructions Important safeguards for you and your new product Your product has been manufactured and tested with your safety in mind. However, improper use can result in electrical shock or fire hazards. To avoid defeating the safeguards that have been built into your new product, please read and observe the following safety points when installing and using your new product, and save them for future reference. - Page 4 Important Safety Instructions a. When the power supply cord or plug is damaged or frayed. b. If liquid has been spilled, or objects have been fallen into the unit. c. If the unit has been exposed to rain or water. d.
-
Page 5: Table Of Contents
Remote controller Keys of remote controller Function introduction Effective range External Equipment Connections ... Operation Set up your TV... Switching ON/OFF the TV set... Choose the Menu Language... Choose the Input Source... Tuning menu Auto search... Manual search.. AFT(Auto Fine Tuning)... -
Page 6: Buttons And Interface Location
Buttons and interface location -This is a simplified representation of front panel. -Here shown may be somewhat different from your TV. Front control panel 1. Power 2.CH- /CH+ Program plus and minus, menu options 3.VOL-/VOL+ Volume increase and decrease, menu reset and entry 4.MENU... -
Page 7: Buttons And Interface Location
Connect Scart out from an Scart device to the Scart input. Antenna Input Connect cable or antenna signals to the TV, either directly or through your cable box. Audio input Earphone jack: for linking DVI/PC Earphone audio audio output terminals. -
Page 8: Remote Controller
Remote control Inserting Batteries .Slide open the cover of the battery compartment on the back of the remote controller. Precautions As strong light may interfere the signals, change your position to operate the remote controller if the television cannot be turned on or off as you expect. -
Page 9: Keys Of Remote Controller
Keys of remote control - The remote controller cannot be operated unless the batteries are properly loaded. - When using the remote control, aim it at the remote control sensor on the TV. Function introduction STILL Picture static SLEEP Displaying sleep time,... -
Page 10: Effective Range
Remote control Effective range -Here showns may be somewhat different from your TV, is only the graphic solution, please take material object as. left Ensure the remote control is pointed toward the remote control window on the display. No obstacles should be placed between the remote control and the remote control window. -
Page 11: External Equipment Connections
75 coaxial cable Plug (additional purchase) coaxial cable to remove the If the antenna needs to be split for two Tv`s, install a 2-WaySignal Splitter in the connections. If the antenna is not installed properly, contact your dealer for assistance. -
Page 12: External Equipment Connection
External Equipment Connection NOTE: All cables shown are not included with the TV. Choose Your Connection There are several ways to connect your television, depending on the components you want to connect and the quality of the signal you want to achieve. The following are examples of some ways to connect your TV. -
Page 13: Dvd Connection
PC/DVI AUDIO IN How to connect Pb/Cb Pr/Cr Use the TV`s YPbPr IN and AUDIO IN jacks, HD-AUDIO PC or HDMI/DVI VIDEO port for video connections, depending on your set-top box connections available. Then, make the corresponding audio connections. -
Page 14: Pc Connection
. Turn on the PC and the TV. . Use TV/AV on the remote control to select PC source. . Check the image on your TV. There may be noise associated with the resolution, vertical pattern, contrast or brightness in PC mode. If... -
Page 15: Connecting Headphones
External Equipment Connections Connecting Headphones You can connect a set of headphones to your set if you wish to watch a TV programme without disturbing the other people in the room. ANT IN Power source AC Outlet Wider Hole and Blade Polarized AC Cord Plug Plug a set of headphones into the 3.5mm... -
Page 16: Set Up Your Tv
Set up your TV -There are several options you might need to set up in order for your TV to work properly. Read the instructions that follow. -In the manual, the OSD(on screen display) may be different from your TV`s, because it is just an example to help you with the TV operation. -
Page 17: Tuning Menu
Tuning menu This TV set has three methods to set channels, which are respectively full automatic, manual search fine tune. In this section, how to use the remote control to set channel is explained. You can also use buttons on the TV set to set channel. -
Page 18: Manual Search
Tuning menu Manual search If excessive channel signals of unwanted programs are received in local area, manual search function is recommended. Press MENU button and then use CH+/- button to select the TUNING menu. Press VOL+/- button and then use CH+/- button to select Tuning Program. -
Page 19: Program Table
Tuning menu Program Table Press MENU button and then use CH+/- button to select the TUNING menu. Press VOL+/- button and then use CH+/- button to select Program Table. Press VOL+/- button to enter the submenu. You can press CH.LIST button again to enter the submenu. -
Page 20: Edit Name
Tuning menu If the colour of some channel is abnormal Usually this should be set in the auto position. However if the colour displayed on the screen are incorrect, you can manually select the correct colour system. Press MENU button and then use CH+/- button to select the TUNING menu. -
Page 21: Skip
Tuning menu Skip After the programs are presetting, you can skip some programs so that to select your favorite channels only. Press MENU button and then use CH+/- button to select the TUNING menu. Press VOL+/- button and then use CH+/- button to select Program Table. -
Page 22: How To Select The Desired Program
How to select the desired sound Press VOL-/+ button on the remote controller or the front of the TV set to adjust the volume level. The range is 0~100. When the volume buttons are pressed the volume level is displayed automatically on the TV screen. -
Page 23: Picture Adjustment
Picture Adjustment The TV menu gives you an overview of the menus you can select. Note: Depending on the input signal, one or more menu items may not be selectable. picture modes The picture mode provides the pre-defined images settings. Press the P.STD button to select the option.(Normal/Soft/Personal/Bright) -
Page 24: Sound Adjustment
Sound Adjustment Sound modes The sound mode provides the pre-defined sound settings. Press the S.STD button to select the option.(Music/Personal/Standard/Hall) This select the modes for sound reproduction dependent on the broadcast signals or signals from external inputs received. Press CH+/- button to Select Audio Mode, press VOL+/- button to select the Personal: A spare setting that can be adjusted to personal tastes... - Page 25 Press the MUTE button on the remote control and "Mute" type face will display on the lower part of the screen. At this time, the sound of the TV set is turned off. If you want to recover the sound, press the MUTE button...
-
Page 26: Ime Setting
Time Setting Clock setting The clock will only work if the TV set is turned on or in standby. When the set is disconnect from the power supply or is turned off by the main power, the clock loses power and will need to be reset when the power is reconnected. -
Page 27: Function Menu
Function menu It is possible to select language, OSD transparent, Menu Timer and Calendar of the menu as follows: Function setup Press MENU button and then use CH+/- button to select the FUNCTION menu. Press VOL+/- button and then use CH+/- button to select the desired option. -
Page 28: Adjust Menu
Adjust menu The TV menu gives you an overview of the menus you can select. Note: Depending on the input signal, one or more menu items may not be selectable. Adjustment Setup When PC input mode is set Press MENU button and then use CH+/- button to select the ADJUST menu. - Page 29 Adjust menu In PC input mode, H-Position and V-Position can be adjusted to eliminate transverse line interference and decentered picture as follows: Adjust This is used for adjusting H Position and V Position as well as relative parameters in PC and modes.(Phase Adjust is not available in HDMI) Press MENU button and then use CH+/- button to select the ADJUST menu.
-
Page 30: Lock Setup
Lock setup The television has the function of security default lock. Password needs to be entered when the program lock mode is to be set. Lock setup Press H.LOCK button on remote control, Password will appear on the screen. If password is correctly entered, the LOCK menu will be displayed. If the password is not correctly entered, you will be required to reenter the password and the cursor will remain onscreen. -
Page 31: Source Lock
Lock setup Prog Num Prog Num is opted for setting up preset channel. Press CH+/- button to select Prog Num. Press VOL+/- button, to select channel number.(The item is not available except TV signal.) Source Lock Source Lock is opted to hinder external input modes, such as AV, Scart and PC. -
Page 32: Other Functions
(If the program is named, its name will also appear ). Auto program scan If you want to select a desirable program, you may scan all the TV programs in memory. You can simply press SCAN button to do this. -
Page 33: Teletext Functions
(cable networks, satellite channels, etc.). MUTE STILL DISPLAY SCAN SLEEP ABC@ GHI$ JKL% PQR& STUV WXYZ *#() TV/AV SWAP P.STD S.STD VOL- MENU VOL+ H.LOCK CH.LIST TIMER ZOOM EXIT Teletext function operation You can press button into TEXT mode, press again to leave TEXT mode. - Page 34 Teletext functions (MIX) While in Teletext mode press the superimposed on top of the TV picture. Press the button again to revert back to Full text. (HOLD) Pressing the button will stop the teletext page automatically updating. This feature is very useful where there are several teletext pages or data on the same page number.
-
Page 35: Maintenance
Extended Absence If you expect to leave your TV dormant for a long time (such as a vacation), it`s a good idea to unplug the power cord to protect against possible damage from lightning or... -
Page 36: Specifications And Functions
Specifications and functions Sound System External Antenna Impedance Storage Temperature Storage Humidity L26A5A Model Size (Wx x ) unit: mm 679X246X525 main component 12.5kg Net Weight(Kg) L32A5A L26A5A 1366X768(Dot) ~150-240V , 50/60Hz PAL, SECAM, NTSC D/K,I,B/G,L,L 75 ohm 90%, non-condensing... -
Page 37: Troubleshooting
(red, blue or green) spots, or some anomalistic stripes or spots. This is not defect. If the TV set is used in an area 2,400 meters above the sea level where the air pressure is below 750hpa, the picture on the screen may be affected and a muffled sound might be produced. - Page 38 0090500708 01...