Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for AEG FEE63606PM
Summary of Contents for AEG FEE63606PM
- Page 1 FEE63606PM User Manual Dishwasher USER MANUAL...
-
Page 2: Table Of Contents
14. ENVIRONMENTAL CONCERNS..............26 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. - Page 3 ENGLISH responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety This appliance can be used by children aged from 8 •...
-
Page 4: Safety Instructions
2. SAFETY INSTRUCTIONS 2.1 Installation www.youtube.com/electrolux www.youtube.com/aeg WARNING! Only a qualified person must How to install your AEG install this appliance. Semi Integrated Dishwasher • Remove all the packaging. • Do not install or use a damaged 2.2 Electrical connection appliance. - Page 5 ENGLISH 2.4 Use be replaced, this must be carried out by our Authorised Service Centre. • Do not put flammable products or • Connect the mains plug to the mains items that are wet with flammable socket only at the end of the products in, near or on the appliance.
-
Page 6: Product Description
2.6 Disposal separately: These lamps are intended to withstand extreme physical conditions in household appliances, WARNING! such as temperature, vibration, Risk of injury or suffocation. humidity, or are intended to signal • Disconnect the appliance from the information about the operational mains supply. -
Page 7: Control Panel
ENGLISH 4. CONTROL PANEL On/off button Option button Program button Indicators Programme indicators Start button Display Delay button 4.1 Indicators Indicator Description Salt indicator. It is on when the salt container needs refilling. It is always off while the programme operates. Rinse aid indicator. -
Page 8: Programmes
5. PROGRAMMES The order of the programmes in the table may not reflect their sequence on the control panel. Programme Dishwasher Degree of Programme phases Options load soil Crockery, Normal, • Prewash • ExtraPower cutlery, pots, lightly dried- •... - Page 9 ENGLISH Programme Dishwasher Degree of Programme phases Options load soil Crockery,cut‐ Normal soil • Prewash lery • Dishwashing 60 °C • Intermediate rinse • Final rinse 60 °C • • AirDry 1) This programme offers the most efficient use of water and energy consumption for crockery and cut‐ lery with normal soil.
-
Page 10: Options
In your request, include the product number code (PNC) from the rating plate. For any other questions regarding your dishwasher, refer to the service book provided with your appliance. 6. OPTIONS prevents rapid changes in the Desired options must be... - Page 11 ENGLISH As the appliance stores the saved To enter user mode, press and hold settings, there is no need to configure simultaneously Delay and Option until it before every cycle. the indicators flash and the display is blank. How to set the programme selection mode 7.2 The water softener The appliance is in programme selection...
- Page 12 For the correct water softener operation, Each performed softener rinse (possible the resin of the softener device needs to more than one in the same cycle) may be regenerated regularly. This process is prolong the programme duration by automatic and is the part of the normal another 5 minutes when it occurs at any dishwasher operation.
-
Page 13: Before First Use
ENGLISH performance, always use rinse aid and The duration of the drying phase and the keep the rinse aid indicator active. door opening time vary depending on the selected programme and options. To deactivate the rinse aid dispenser and indicator, set the level of rinse aid to 0. When AirDry opens the door, the display shows the remaining time of the running How to set the rinse aid level... -
Page 14: Daily Use
CAUTION! procedure is complete. The procedure is Water and salt can come out repeated periodically. of the salt container when 8.1 The salt container you fill it. After you fill the salt container, immediately... - Page 15 ENGLISH Make sure that the appliance is in The upper ends of the two programme selection mode. vertical ribs inside the • If the salt indicator is on, fill the compartment (B) indicate salt container. the maximum level for filling •...
-
Page 16: Hints And Tips
Cancelling the programme door, the appliance continues from the point of interruption. Press and hold simultaneously Delay If the door is opened for and Option until the appliance is in more than 30 seconds programme selection mode. during the drying phase, the Make sure that there is detergent in the running programme ends. - Page 17 ENGLISH – Refill the salt container whenever 1. Set the highest level of the water necessary. softener. – Use the recommended dosage of 2. Make sure that the salt and rinse aid the detergent and rinse aid. containers are full. –...
-
Page 18: Care And Cleaning
• The programme is suitable to the type 2. First remove items from the lower of load and the degree of soil. basket, then from the upper basket. • The correct quantity of detergent is After the programme is used. - Page 19 ENGLISH 5. Make sure that there are no residues of food or soil in or around the edge 1. Turn the filter (B) counterclockwise of the sump. and remove it. 6. Put back in place the flat filter (A). Make sure that it is correctly positioned under the 2 guides.
- Page 20 11.5 Cleaning the lower spray 11.6 Cleaning the upper spray arm We recommend to clean the lower spray We recommend to clean the upper spray arm regularly to prevent soil from arm regularly to prevent soil from clogging the holes.
-
Page 21: Troubleshooting
ENGLISH 1. Move the upper basket to the lowest level to reach the spray arm more easily. 2. To detach the spray arm (C) from the delivery tube (A), turn the mounting element (B) counterclockwise and pull the spray arm downwards. 3. - Page 22 Problem and alarm code Possible cause and solution You cannot activate the ap‐ • Make sure that the mains plug is connected to the mains pliance. socket. • Make sure that there is no damaged fuse in the fuse box.
- Page 23 ENGLISH Problem and alarm code Possible cause and solution The level of water inside the • Switch the appliance off and on. appliance is too high. • Make sure that the filters are clean. The display shows iF1. • Make sure that the outlet hose is installed at the right height above the floor.
- Page 24 For alarm codes not described in the WARNING! table, contact an Authorised Service We do not recommend using Centre. the appliance until the problem has been completely fixed. Unplug the appliance and do not plug it in again until you are certain that it operates correctly.
-
Page 25: Technical Information
ENGLISH Problem Possible cause and solution Traces of rust on cutlery. • There is too much salt in the water used for washing. Refer to "The water softener". • Silver and stainless steel cutlery were placed together. Do not place silver and stainless steel items close to‐ gether. -
Page 26: Environmental Concerns
Voltage (V) 220 - 240 Electrical connection Frequency (Hz) Water supply pressure bar (minimum and maximum) 0.5 - 8 MPa (minimum and maximum) 0.05 - 0.8 Water supply max 60 °C Cold water or hot water Capacity Place settings 1) Refer to the rating plate for other values. - Page 28 www.aeg.com/shop...