Table of Contents
Advertisement
HP 16530/31A- Installation
2-9. OPERATING ENVIRONMENT
The operating environment is listed in table
1-2. Note should be made of the non-
condensing humidity limitation.
Condensation within the instrument can
cause poor operation or malfunction.
Protection should be provided against inter-
nal condensation.
The HP 16530/31A will operate at all
specifications within the temperature and
humidity range given in table 1-2. However,
reliability is enhanced by operating the in-
strument within the following ranges.
Temperature:
+20 to +35°
c
(+68 to
+95° F)
Humidity:
20% to 80% non-condensing
2-10. STORAGE
The module may be stored or shipped in
environments within the following limits:
Temperature:
-40° C to +75° C
Humidity:
Up to 90% at 65°C
Altitude:
Up to 15,300 meters (50,000
Feet)
The module should also be protected from
temperature extremes which cause conden-
sation on the module.
2-8
2-11. PACKAGING
The following general instructions should be
used for repacking the module with com-
mercially available materials.
•
Wrap module in anti-static plastic.
•
Use a strong shipping container. A
double-wall carton made of 350 lb. test
material is adequate.
•
Use a layer of shock-absorbing
material 70 to 1 00 mm (3 to 4 inch)
thick around all sides of the module to
provide firm cushioning and prevent
movement inside the container.
•
Seal shipping container securely.
•
Mark shipping container FRAGILE to
ensure careful handling.
•
In any correspondence, refer to
module by model number and board
number.
2-12. TAGGING FOR SERVICE
If the module is to be shipped to a
Hewlett-Packard office for service or repair,
attach a tag showing owner (with address),
complete board number, and a description
of the service required.
Advertisement
Table of Contents
