hit counter script
HP 16500 Installation And Service Manual
  1. Manuals
  2. Brands
  3. HP Manuals
  4. Network Hardware
  5. HP 16500
  6. Installation and service manual
HP 16500 Installation And Service Manual

HP 16500 Installation And Service Manual

Interface module
Hide thumbs
Table of Contents

Advertisement

Quick Links

About this Manual
We've added this manual to the Agilent website in an effort to help you support
your product. This manual is the best copy we could find; it may be incomplete
or contain dated information. If we find a more recent copy in the future, we will
add it to the Agilent website.
Support for Your Product
Agilent no longer sells or supports this product. Our service centers may be able
to perform calibration if no repair parts are needed, but no other support from
Agilent is available. You will find any other available product information on the
Agilent Test & Measurement website, www.tm.agilent.com.
HP References in this Manual
This manual may contain references to HP or Hewlett-Packard. Please note that
Hewlett-Packard's former test and measurement, semiconductor products and
chemical analysis businesses are now part of Agilent Technologies. We have
made no changes to this manual copy. In other documentation, to reduce
potential confusion, the only change to product numbers and names has been in
the company name prefix: where a product number/name was HP XXXX the
current name/number is now Agilent XXXX. For example, model number
HP8648A is now model number Agilent 8648A.

Advertisement

Table of Contents
loading

Related Manuals for HP HP 16500

Summary of Contents for HP HP 16500

  • Page 1 This manual may contain references to HP or Hewlett-Packard. Please note that Hewlett-Packard's former test and measurement, semiconductor products and chemical analysis businesses are now part of Agilent Technologies. We have made no changes to this manual copy. In other documentation, to reduce...
  • Page 2 Installation and Service Guide Publication number 16500-97012 First edition, April 1995 For Safety information, Warranties and Regulatory information, see the pages behind the index Copyright Hewlett-Packard Company 1993, 1994, 1995 All Rights Reserved HP 16500H Interface Module...
  • Page 3 Chapter 2 shows you how to install the HP 16500H in the HP 16500B mainframe. This chapter also provides information on where to go next, depending on which environment you are using the HP 16500 system in. Chapter 3 contains the procedures for performance verification and replacing assemblies.

  • Page 4: Table Of Contents

    Contents 1 Introducing the HP 16500H Interface Module Accessories Supplied 1–3 Requirements 1–3 Physical Connections 1–3 LAN Support 1–4 2 Installing the Interface Module To Install the HP 16500H Hardware 2–2 To Verify the Installation 2–4 Ethernet LAN Interface 2–5 HP 16501A Expansion Frame Interface 2–7 HP 16505A Protoytype Analyzer 2–8 3 Servicing the Interface Module...
  • Page 5 Contents-2...

  • Page 6: Introducing The Hp 16500H Interface Module

    Introducing the HP 16500H 1-2 Accessories Supplied 1–3 Requirements 1–3 Physical Connections 1–3 LAN Support 1-4 Introducing the HP 16500H Interface Module...
  • Page 7 Introducing the HP 16500L LAN Interface Module The HP 16500H LAN interface module provides three capabilities for your HP 16500 Logic Analysis System: connection to an Ethernet 10Base-T Local Area Network (LAN) connection to an HP 16501A Expansion Frame for the HP 16500B...

  • Page 8: Accessories Supplied

    Accessories Supplied The HP 16500H is shipped with the following accessories: this Installation and Service Guide a LAN Administrator’s and Service Guide a LAN User’s Guide screws and one cable to install the HP 16500H into the HP 16500B mainframe TORX 10 and TORX 15 wrenches If your HP 16500H was installed into the HP 16500B by HP, you will not receive these tools.

  • Page 9: Lan Support

    Introducing the HP 16500H Interface Module LAN Support LAN Support For information about the LAN protocols and file types supported by the HP 16500H, refer to the LAN Administrator’s and Service Guide 1–4...
  • Page 10 This chapter includes procedures to install the interface module into the HP 16500B Logic Analysis System mainframe and to verify the installation. For detailed information on how to install the HP 16500B in one of the three applications supported by the interface module, refer to the documentation for the specific application.

  • Page 11: Installing The Interface Module To Install The Hp 16500H Hardware

    To Install the HP 16500H Hardware To Install the HP 16500H Hardware If you need instructions for removing and replacing parts of the HP 16500B, refer to the HP 16500B Logic Analysis System Service Guide. SHOCK HAZARD Disconnect the power from the mainframe before W A R N I N G performing the following procedures.
  • Page 12 Slide the interface module into the mainframe through the slot in the rear panel. Install the screws connecting the interface module to the mainframe. Two screws through the top of the interface module connect it to the sheetmetal plate, and four screws through the rear plate of the interface module connect it to the rear panel of the mainframe.

  • Page 13: To Verify The Installation

    To Verify the Installation To Verify the Installation Check that "Ethernet" is available in the Communications menu of the mainframe System Configuration menu. When you power-up the mainframe, the Logic Analysis System performs the power-up self-tests. After the self-tests are finished, the screen displays the System Configuration menu.

  • Page 14: Ethernet Lan Interface

    Ethernet LAN Interface The LAN interface provides a network-based interface between the HP 16500B Logic Analysis System and personal computers and workstations over a 10Base-T Ethernet LAN. Detailed information on installing and troubleshooting in the LAN environment is covered in the HP 16500H LAN Administrator’s and Service Guide.
  • Page 15 Ethernet LAN Interface Verify connectivity with an echo request. In most network environments, an echo request is accomplished using the ping utility. For the exact syntax for the ping or other echo request utility, refer to your network documentation. A normal response to multiple echo requests is 9, 10, or possibly 11 packets transmitted for every 10 echo requests.

  • Page 16: Hp 16501A Expansion Frame Interface

    Installing the Interface Module HP 16501A Expansion Frame Interface HP 16501A Expansion Frame Interface The interface port for the HP 16501A Expansion Frame permits you to quickly and easily connect an expansion frame to the HP 16500B mainframe. With an expansion frame connected to the mainframe, a total of ten 16500-series measurement modules can be configured and utilized.

  • Page 17: Hp 16505A Protoytype Analyzer

    Installing the Interface Module HP 16505A Protoytype Analyzer HP 16505A Protoytype Analyzer The high-speed interface port for an HP 16505A Protoytype Analyzer permits you to connect a Prototype Analyzer to the HP 16500B mainframe. Detailed installation information is covered in the HP 16505A Prototype Analyzer Installation Guide.
  • Page 18 Verifying the Interface Module Performance 3-2 Performance verification procedure 3-3 Troubleshooting an HP 16501A Expansion Frame 3-7 Troubleshooting in an Ethernet LAN Environment 3-8 Troubleshooting in the HP 16505A Prototype Analyzer Environment 3-9 Removing and Replacing the HP 16500H Interface Module 3-10 Returning Parts 3-13 Ordering Replacable Parts 3-14 Replacable Parts 3-15...

  • Page 19: Servicing The Interface Module Verify The Interface Module Performance

    Servicing the Interface Module Verify the Interface Module Performance Verify the Interface Module Performance Before starting the interface module performance verification, check all cables and connectors to ensure that all cables are properly connected. The interface module performance verification (self-test) is divided into two sections.
  • Page 20 Procedure This procedure verifies the performance of the interface module. To verify performance of the HP 16500B Logic Analysis System or the optional measurement modules, refer to the Service Guides for those products. If the screen appears blank, the interface module or cable may be defective.
  • Page 21 Verify the Interface Module Performance If the "Ethernet" selection appears in the Communications menu, then go to step 5. If "Ethernet" does not appear in the Communications menu, perform the following steps. Remove power from the HP 16500B, disconnect the power cable, then remove the top cover.
  • Page 22 Touch Test System, then select Mainframe Test in the pop-up menu. The screen will display the Mainframe Test menu. Select Option Board Test, then select Run. If an HP 16501A expansion frame is not connected, then expect a "No Expansion Card Present" message to appear when you run the Option Board Test.
  • Page 23 Verify the Interface Module Performance Verify that the tests pass. If all of the tests pass, then go to the step 9. If any of the tests fail, then LAN hardware or the interface module is suspect. To verify the LAN hardware, perform the following checks: Check that the LAN cable is properly seated at both the interface module and at the client/server/router ends.

  • Page 24: Troubleshooting An Hp 16501A Expansion Frame

    Servicing the Interface Module Troubleshooting an HP 16501A Expansion Frame Troubleshooting an HP 16501A Expansion Frame For details on troubleshooting a system that is connected to an HP 16501A Expansion Frame, refer to the HP16500B/16501A Logic Analysis System Service Manual. If you suspect that the HP 16500H Interface Module is defective, use the procedures in this chapter to verify the interface module performance and, if necessary, replace the hardware.

  • Page 25: Troubleshooting In An Ethernet Lan Environment

    Servicing the Interface Module Troubleshooting in an Ethernet LAN Environment Troubleshooting in an Ethernet LAN Environment For details on troubleshooting a system that is connected to an Ethernet LAN, refer to the HP16500H LAN Administrator’s and Service Guide. If you suspect that the HP 16500H Interface Module is defective, use the procedures in this chapter to verify the interface module performance and, if necessary, replace the hardware.

  • Page 26: Troubleshooting In The Hp 16505A Prototype Analyzer Environment

    Servicing the Interface Module Troubleshooting in the HP 16505A Prototype Analyzer Environment Troubleshooting in the HP 16505A Prototype Analyzer Environment For details on troubleshooting a system that is connected to an HP 16505A Protoype Analyzer, refer to the HP16505A Prototype Analyzer Service Guide.

  • Page 27: Removing And Replacing The Hp 16500H Interface Module

    Removing and Replacing the HP 16500H Interface Module Removing and Replacing the HP 16500H Interface Module If the HP 16500B Logic Analysis System is connected and mounted to a LAN, then unmount the HP 16500B file system. Unmounting from a LAN You must unmount the HP 16500B before power is removed from it.
  • Page 28 Servicing the Interface Module Removing and Replacing the HP 16500H Interface Module Remove the screws connecting the interface module to the mainframe. Two screws through the top of the interface module connect it to the sheetmetal plate, and four screws connect the rear plate of the interface module to the rear panel of the mainframe (see the figure below).
  • Page 29 Removing and Replacing the HP 16500H Interface Module Install the new interface module by reversing this procedure. Test the performance of the interface board. Refer to "Verifying the interface module performance" in this chapter for the performance verification test procedure. Reconnect the HP 16505A or HP 16501A to the interface board, or reconnect the interface board to your network.

  • Page 30: Returning Parts

    Returning Parts Before shipping the module to Hewlett-Packard, contact your nearest Hewlett-Packard sales office for additional details. Write the following information on a tag and attach it to the part to be returned. Name and address of owner Model number Description of service required or failure indications Remove accessories from the module.

  • Page 31: Ordering Replaceable Parts

    Servicing the Interface Module Ordering Replaceable Parts Ordering Replaceable Parts Parts listed To order a part on the list of replaceable parts, quote the Hewlett-Packard part number, indicate the quantity desired, and address the order to the nearest Hewlett-Packard Sales Office. Parts not listed To order a part not on the list of replaceable parts, include the model number of the module, a description of the part (including its function), and the...

  • Page 32: Replaceable Parts List

    Replaceable Parts List HP 16500H Interface Module Replacment Parts Designator HP Part Number 16500-66514 0515-0372 16500-61613 16500-61614 * This cable is only used if the HP 16500H is installed in place of an HP 16500L interface module. HP 16500H Replaceable parts Replaceable Parts List Description Interface Board...
  • Page 33 3-16...
  • Page 34 Index accessories,1-3 parts cables performance verification connecting,3-11 orientation,2-2 connections,1-3 ping,2-5 Prototype Analyzer,2-8 direct mail order system,3-14 removing the interface module,3-10 - 3-12 echo request,2-5 replacing the interface module,3-10 - 3-12 Ethernet installation,2-5 requirements,1-3 expansion frame,2-7 returning parts,3-13 faulty cable or HP 16500H self-tests performance verification,3-3 HP 16501A Expansion Frame,2-7...
  • Page 35 Index-2...
  • Page 36 © Copyright Hewlett- Safety Packard Company 1995 This apparatus has been All Rights Reserved. designed and tested in accordance with IEC Publication 348, Safety Reproduction, adaptation, or Requirements for Measuring translation without prior Apparatus, and has been written permission is supplied in a safe condition.
  • Page 37 Product Warranty No other warranty is expressed or implied. This Hewlett-Packard Hewlett-Packard product has a warranty specifically disclaims the against defects in material implied warranties of and workmanship for a period merchantability or fitness of one year from date of for a particular purpose.

  • Page 38: Declaration Of Conformity

    DECLARATION OF CONFORMITY according to ISO/IEC Guide 22 and EN 45014 Manufacturer’s Name: Manufacturer’s Address: declares, that the product Product Name: Model Number(s): Product Option(s): conforms to the following Product Specifications: Safety: IEC 348:1978 / HD 401 S1:1981 UL 1244 CSA-C22.2 No.

This manual is also suitable for:

Hp 16500bHp 16500hHp 16505a16505a

Table of Contents

Save PDF