Table of Contents
Advertisement
Problem
The display shows
The display shows Error code (e.g. E51).
1) After maximum 5 hours, the programme ends automatically.
2) It can happen that some area remains humid when drying big items (e.g. bed sheets ).
12.1 If the drying results are not
satisfactory
• The set programme was incorrect.
• The filter is clogged.
• The Heat Exchanger is clogged.
• There was too much laundry in the
appliance.
• The drum is dirty.
13. TECHNICAL DATA
Height x Width x Depth
Max. depth with the appliance door open
Max. width with the appliance door open
Adjustable height
Drum volume
Maximum load volume
Voltage
Frequency
Sound power level
Total power
Possible solution
The laundry is too wet. Spin the laundry
in the washing machine again.
Ensure that the room temperature is
higher than +5°C and lower than +35°C.
Optimal room temperature is 19°C to
24°C.
Set the Time Drying or the Extra Dry pro‐
gramme.
If you want to set a new programme, de‐
.
activate and activate the appliance.
Make sure that the options are suitable
for the programme.
Deactivate and activate the appliance.
Start a new programme. If the problem
occurs again, contact the Service centre.
• Incorrect setting of the conductivity
sensor ( See chapter "
Adjustment of the remaining laundry
moisture degree " for better setting).
• The airflow slots are clogged.
• Room temperature is too low or too
high ( optimal room temperature 19°C
to 24°C )
850 x 600 x 540 mm (maximal 600 mm)
1030 mm
950 mm
850 mm (+ 15 mm - feet regulation)
104 l
7 kg
230 V
50 Hz
66 dB
2250 W
2)
Settings -
ENGLISH
17
Hide quick links:
Advertisement
Table of Contents
