Table of Contents
Advertisement
en Troubleshooting
Fault
The laundry is too
damp.
Odours have formed
in the appliance.
52
Cause and troubleshooting
Check whether the lighting in your kitchen or other
▶
appliances are working.
The load is too large.
Observe the maximum load capacity of the
▶
→ "Programmes", Page 24.
After the end of the programme, warm laundry feels
damper than it actually is.
Remove the laundry from the drum as soon as the
1.
drying programme has finished.
Spread the items of laundry for cooling.
2.
Unsuitable dryness level set.
→ "Changing the dryness level", Page 23.
▶
Drying target not adjusted.
→ "Adjusting the dryness level", Page 23.
▶
Load too small.
Set a timed programme for the subsequent drying.
▶
→ "Programmes", Page 24
Moisture sensor dirty.
→ "Cleaning the moisture sensor", Page 45.
▶
The drying process is interrupted and the condensa-
tion tank has been filled.
→ "Emptying the condensation container", Page 31.
1.
→ "Inserting the condensation container", Page 31.
2.
→ "Starting the programme", Page 28.
3.
Stubborn dirt in the appliance or an extended appli-
ance downtime of more than one month.
Preparing the appliance for the intensive appliance
▶
care programme.
→ "Preparing the appliance for the intensive appli-
ance care programme", Page 40.
Advertisement
Table of Contents
