Table of Contents
Advertisement
CAP FRAME option
7. Remove the cap frame from the cap
stretcher.
8. As shown in Fig. 8, install the cap frame on
cap in the drive frame.
Rotate the cap frame as show in the Fig 8
so that the brim of the cap cannot hit the
machine.
Then, push the holder lever in the 2 places
shown in the arrow in Fig. 8, and install the
cap frame in the cap drive frame so that so
that the center guide of the drive frame fits
the concave area of the cap frame.
Confirm that the cap frame is firmly installed on
the cap drive frame without any gap.
If there is a gap between the cap frame and the
cap frame drive or the holder lever does not fit
the hole of the cap frame, adjust loosen the set
screw on the hold lever to adjust the position.
7-7
Center
guide
Hold lever
Cap drive
frame
Fig. 8
7-7
-DA
OC10
-52
Advertisement
Table of Contents
