Table of Contents
Advertisement
Operation Manual / 4 Product description / A130-M.. - A145-M..
8 Dismantling and fitting / 8.1 Introduction
WARNING
Suspended loads
Loads that are not attached according to regulations can cause injury to
personnel or fatal accidents.
Only fasten the turbocharger, assemblies or individual parts on properly
u
functional lifting gear with sufficient load limit.
Pay attention to the correct attachment of loads on the crane hook.
u
People must not stand beneath suspended loads.
u
Wear safety gloves to protect against mechanical hazards.
Wear safety helmet.
Definition of terms
¡
Suspension point
Defined loading point on a component or an assembly (blind hole thread, eyelet, lug).
¡
Assembly device
Devices that are fitted on the turbocharger in order to obtain a suspension point. As-
sembly devices are specially constructed and designed for the defined use; they are not
commercially available products. Use assembly devices only for the described applica-
tions.
¡
Lifting gear
Equipment for the lifting and transporting of loads (ropes, chain block, crane). Lifting
gear is not supplied by ABB.
Swivel lifting eyes to be used
Two swivel lifting eyes are required for the safe lifting of loads, which are not supplied by
ABB Turbo Systems.
Swivel lifting eyes
Table 33: Swivel lifting eyes
© Copyright 2017 ABB. All rights reserved.
Product
Thread
Length
M
A130
M10
17 mm
A135
M10
17 mm
A140
M12
21 mm
A145
M12
21 mm
HZTL4031_EN
Minimum
Quantity
L
load limit
100 kg
150 kg
250 kg
300 kg
Revision F
August 2017
2
2
2
2
Advertisement
Chapters
Table of Contents
