Siemens SIMATIC ET 200SP Manual page 13

Hide thumbs Also See for SIMATIC ET 200SP:

Table of Contents

Parameters

Substitute value

Potential group

Due to the limited number of parameters at a maximum of 244 bytes per ET 200SP station with a

PROFIBUS GSD configuration, the configuration options are restricted. If required, you can assign these

parameters using data record 128 as described in the "GSD file PROFINET IO" column (see table above).

The parameter length of the I/O module is 16 bytes.

Digital output module DQ 8x24VDC/0.5A ST (6ES7132-6BF00-0BA0)

Manual, 07/2014, A5E03574575-AC

Value range

•

Use potential group

•

of the left module

Allow new potential

•

group

Default

Configuration

in RUN

yes

Use potential

group of the

left module

Parameters/address space

4.1 Parameters

Effective range

with configuration software,

e.g. STEP 7 (TIA Portal)

GSD file

PROFINET IO

PROFIBUS DP

Channel

Module

Table of Contents