Turning Off The Projector - NEC NP110 User Manual
Nec np110: user guide
Hide thumbs
Also See for NP110:
- Quick setup manual (6 pages) ,
- Technical specifications (2 pages) ,
- Specifications (2 pages)
Table of Contents
Advertisement
7 Turning off the Projector
To turn off the projector:
1. first, press the
cabinet or the POWer Off button on the remote con-
trol.
The [POWER OFF / ARE YOU SURE? /CARBON SAV-
INGS- SESSION X.XXX[g-CO2]] message will appear.
2. secondly, press the enter button or press the
(POWer) or the POWer Off button again.
The lamp will turn off and the projector will go into standby
mode. When in standby mode, the POWER indicator will
light orange and the STATUS indicator will light green when
[NORMAL] is selected for [STANDBY MODE].
Immediately after turning on the projector and displaying an
image, you cannot turn off the projector for 60 seconds.
3. finally, unplug the power cable.
The POWER indicator will go out.
CAUTION:
Parts of the projector may become temporarily heated if the AC power supply is disconnected either during normal
projector operation or during cooling fan operation. Use caution when picking up the projector.
NOTE:
• Do not turn off the power for 60 seconds immediately after turning it on and displaying an image.
• Do not disconnect the AC power supply to the projector within 10 seconds of making adjustment or setting changes and closing
the menu. Doing so can cause loss of adjustments and settings.
(POWer) button on the projector
3. Projecting an Image (Basic Operation)
Power On
Steady green light
27
＋
Standby
Steady orange light
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
