• Failure to carefully read and follow all instructions in Important Safety Instructions this manual can result in equipment malfunction, READ ALL INSTRUCTIONS BEFORE USING THE property damage, personal injury and/or death. APPLIANCE. Installation Always comply with the following precautions to •...
Page 3
If a non-expert without authorization installs the prod- • Do not connect the power line to a communication uct, it may cause fire, electric shock, explosion or injury terminal. It may cause a fire or electric shock or it of the user, and it may cause failure of the product. may cause the product failure.
Page 4
• Do not use a fire equipment near the power line. It • Use the product under the supervision of the may cause a fire or electric shock. guardian so that a child may not hang on the prod- uct. It may cause product damage or the product •...
Page 5
• Do not use the product for special usage such as • When transporting the product, be careful not to animal or plant, precision equipment, preservation drop or break the product. It may cause the product of art pieces, etc. and do not use the product in the failure or injury of the transporting person.
• Do not store the product near liquid such as vase or Product composition water jar, etc. Fire or electric shock may occur. • When the product is not used for a long period of time, lower the main power switch. Otherwise, it may result in fire or malfunction.
Search for the indoor unit device you want to use and save it to the product. STEP 4. Install ThinQ app and register an account See attached form ‘Connecting LG ThinQ and LG Electronics’. STEP 5. Connect and use ThinQ app Interlocking with the ThinQ app to control/monitor the searched in- door unit.
Page 8
(indoor unit, ventilation equipment) considering the entire instal- lation composition connected to one controller. • The maximum allowable communication length guaranteed by LG Electronics is 1000 m. In other words, the controller and the farthest The address of the device must be set within the range of 00~0F.
Page 9
Note : Setting method of indoor unit central control address 3. Connect RS485 cable located at the backside of the controller main unit to RS485 terminal. The central control address setting method may be different accord- ing to the indoor unit product or remote controller type, so proceed the address setting by referring to the indoor unit product or wired re- mote controller manual.
Page 10
4. Connect the Ethernet cable to the LAN port on the back of the con- 6. Match the groove of the product to the hook of the wall installation troller's main unit. plate installed on the wall. 5. Connect the 12V power suppled through the outdoor unit to the 7.
Page 11
Install the ThinQ app and register the account Search for the indoor unit Refer to the ‘Connecting LG ThinQ and LG Electronics’ manual at- tached in the page for the account registration method and ThinQ Search for the installed indoor unit device and display the number of app installation.
Page 12
A weak signal can take a lot of time or fail to register the product. • Log in with the existing account or create an LG account. • When changing the wireless router, internet service provider, or password, delete the registered product in LG ThinQ and re-register •...
Page 13
Synchronize product connection information When interlocking BECON cloud - It is able to check the number of air conditioners available to con- nect to the cloud gateway. To interlock the BECON cloud, you need to set it up through a sepa- rate PC program.
Page 14
Declaration of Conformity and internet inspection. Hereby, LG Electronics declares that the radio equipment type Cloud Gateway is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.lg.com/global/support/cedoc/cedoc#...