Pour the stain remover into
compartment
will be added in the appropriate phase
of the washing programme.
This option can increase
the programme duration
and is not available with a
temperature lower than
40 °C.
• Předpírka
Use this option to add a prewash
phase at 30 °C before the washing
phase.
This option is recommended for
heavily soiled laundry, especially if
containing sand, dust , mud and other
solid particles.
This option can increase
the programme duration.
The corresponding indicator above
the touch button illuminates.
8.8 Máchání
With this button you can select one of the
following options:
• Extra máchání option
This option adds a few rinses
according to the selected washing
programme.
Use this option for persons allergic to
detergent residues and in areas
where the water is soft.
This option increases
slightly the programme
duration.
• Skipping wash phase - Pouze
máchání option
The appliance performs only the
rinsing phase, the spinning and the
draining phases of the selected
programme.
The corresponding indicator above the
touch button illuminates.
8.9 Pára plus
This option adds a steam phase followed
by a short anti-crease phase at the end
. The stain remover
of the washing programme. The steam
phase reduces fabric creasing and
facilitates the fabric ironing.
The indicator
flashes on the display
during steam phase.
The drum performs smooth movements
for about 30 minutes. The duration of the
steam phase changes accordingly to the
selection. When Plus Steam option is set
the programme ends up with an
anticrease phase during which the drum
is occasionally rotated to prevent
wrinkling. The display shows
indicator
is steady on and the
indicator
starts flashing. Start/Pauza
button is lit as well. At the end of the
anticrease phase the drum definitely
stops, the indicator goes off, the door
unlocks. User at any moment can
terminate the anticrease phase by:
• pressing the On/Off button for a few
seconds to activate or deactivate the
appliance;
• turning the selector knob to another
position.
A small laundry load helps to
reach better results.
8.10 Odložený start
With this option you can delay the start of
a programme in a more convenient time.
Touch the button repeatedly to set the
required delay. The time increases by
steps of 30 minutes up to 90' and from 2
hours up to 20 h.
After touching the Start/Pauza button,
the display shows the indicator
the selected delay time and the
appliance begins the countdown.
8.11 Start/Pauza
Touch the Start/Pauza button to start,
pause the appliance or interrupt a
running programme.
ENGLISH
19
the
and