Contents 13.1 Setup Smart TV 1 Get Support 13.2 Smart TV Start Page 1.1 Identify and Register your TV 13.3 App Gallery 1.2 TV Help and User Manual 14 TV on Demand / Video on Demand 1.3 On-line Help and User Manual 1.4 Consumer Care / Repair 15 Ambilight 2 Software...
Identify and Register your TV Manual Identify your TV - TV model number and serial To solve any Philips TV related problem, you can number consult our online support. You can select your language and enter your product model number.
Page 5
cause severe injury, irrepairable damage to your TV or void your warranty.
back on again. Please wait. Software Do not . . . • use the remote control • remove the USB memory device from the TV • press twice Update Software • press the power switch on the TV The TV switches itself off (for 10 seconds) and then back on again.
Quick Guide Remote Control Batteries and Cleaning Replace batteries Standby / On If the TV does not react on a key press on the remote To switch the TV on or back to Standby. control, the batteries might be empty. 2 - ...
6 - Home To open the Home menu. IR sensor 7 - OPTIONS To open or close the Options menu. The TV can receive commands from a remote control that uses IR (infrared) to send commands. If you use such a remote control, always make sure you point Bottom the remote control at the infrared sensor on the front...
To read the instructions, in Help > User manual, press the colour key Keywords and look up Safety and Care. TV Placement • 43PUS6754 VESA MIS-F 200x200, M6 (Minimum 10 mm, Maximum 15 mm) Tips on Placement • 50PUS6754 VESA MIS-F 300x200, M6 (Minimum 10 mm, •...
Page 10
Connect Power Cable • Insert the power cable into the POWER connector on the back of the TV. • Make sure the power cable is securely inserted in the connector. • Make sure that the power plug, in the wall socket, is accessible at all times.
Connections Connectivity guide Always connect a device to the TV with the highest quality connection available. Also, use good quality cables to ensure a good transfer of picture and sound. When you connect a device, the TV recognizes its type and gives each device a correct type name. You can change the type name if you wish.
Match the YPbPr (green, blue, red) connector colours with the cable plugs when you connect. Use an Audio L/R cinch cable if your device also has sound. Digital Audio Out - Optical Audio Out - Optical is a high quality sound connection.
mobile device. 2 - On your mobile device, select the TV. (This TV will be displayed as TV model name) 3 - Select the TV name on your mobile device, after connection, you can enjoy using Miracast. Stop Sharing You can stop sharing a screen from the TV or from the mobile device.
Formatting removes all files from the USB Hard Drive. favourite app store today. To Pause The Philips TV Remote App is available for iOS and To pause a broadcast, you need a USB compatible Android and is free of charge.
Page 15
Warning The USB Hard Drive is formatted exclusively for this TV, you cannot use the stored recordings on another TV or PC. Do not copy or change recording files on the USB Hard Drive with any PC application. This will corrupt your recordings.
Switch Source Source List • To open the sources menu, press SOURCES . • To switch to a connected device, select the device with the arrows (Right) or (Left) and press OK. • To view the technical information of the connected device you are watching, press ...
for channels Channels 1 - Select Start now and press OK. 2 - Select Update channels to only add new digital channels. 3 - Select Start and press OK to update channels. About Channels and Switch This can take a few minutes. Channels Quick reinstall ...
Page 18
frequency value to search for channels, the All channels list but also in the New channels list. select Advanced. Empty channels are removed. If new channels are found or if channels are updated Frequency step size or removed, a message is shown at TV start up. The The TV searches for channels in steps of 8MHz.
Page 19
• Fine tune automatically. To fine tune a channel, select Fine tune and • Up to 4 Satellites - You can install up to 4 satellites press OK. You can fine tune the channel (4 LNBs) on this TV. Select the exact number of with ...
Page 20
(Home) > Settings > Install Manual Installation Channels > Satellite installlation > Search for satellite > Remove satellite (Home) > Settings > Install Channels > Satellite installlation > Manual You can remove one or more satellites from your installtion current satellite installation.
Page 21
With Channel list copy, you can copy the channels setting, see chapter Re-install channels. Start this installed on one TV onto another Philips TV of the procedure until you reach the country setting. same range. With Channel list copy, you avoid the Press ...
language (the language set on TV), the TV can show Channel info subtitles automatically in one of your preferred subtitle languages. One of these subtitle languages Select Channel info to view the technical information must also be part of the broadcast. of the channel.
Page 23
Channel List Options Select Channel Range > OK > OPTIONS > Select channel range Open Option Menu Select a range of channels in a favourites channel To open the channel list option menu... list, once completed, press OK. •...
With the TV Guide you can view a list of the current and scheduled TV programmes of your favourite Favourite Channels channels. Along with your favourite channels, the first 3 most used channels from the broadcasters’ default About Favourite Channels list will be appended after your favourite channels for your preview.
Page 25
Some broadcasters offer T.O.P. Text. To open T.O.P. Text pages within Text, press OPTIONS and select T.O.P. overview. * The teletext can only be reached when the channels are installed directly on the TV’s internal tuner and the set is on TV mode. If a set-top box is being used, the teletext will be unavailable via TV.
Change Day TV Guide If the TV guide information comes from the broadcaster, you can press + to view the schedule of one of the next days. Press - to go back to the previous day. What You Need Alternatively, you can press ...
* Freeview Play is only for UK models. Set a Recording You can set a recording in the TV Guide. To see the recording list, press Recordings , a programme set to be recorded is marked with (red dot) on the front of the programme name. To record a programme…...
To record a programme… Recording and 1 - Press TV GUIDE. 2 - On the TV guide, select the channel and programme you wish to record. Press (Right) Pause TV or (Left) to scroll through the programmes of a channel.
8 - Select Schedule and press OK to schedule the Replay manual recording. The recording will appear in the list of scheduled Since the TV stores the broadcast you are watching, recordings and reminders. you can mostly replay the broadcast for a few seconds.
Photo Options Videos, Photos and With a photo on screen, press OPTIONS to… Music List/Thumbnails View photos with list view or thumbnails view. Shuffle off, Shuffle on 10.1 View the pictures in sequential order, or at random. From a USB Connection Repeat, Play once View the pictures repeatedly or once only.
360 Photo Options Video Options With a 360 photo on screen, press OPTIONS to… During the video playback, press OPTIONS to… List/Thumbnails List/Thumbnails View 360 photos with list view or thumbnails view. View video files with list view or thumbnails view. Shuffle off, Shuffle on Subtitles View the pictures in sequential order, or at random.
ideal sound settings. • Audio out - Set the TV to play the sound on TV or Open TV Setting on the connected audio system. • Ambilight style* - Select one of preset Ambilight Menus styles. • Ambilight+hue* - Switch Ambilight+hue on or off. •...
Page 33
not supported in Monitor mode. The TV is able to play (Home) > Settings > All HDR video in Monitor mode but no HDR processing settings > Picture > Sharpness will be applied. Press the arrows (up) or (down) to adjust the sharpness value of the picture.
Page 34
Whitepoint alignment Video Contrast, Gamma Customise the whitepoint alignment based on the Video contrast selected colour temperature of the picture. Press the arrows (up) or (down) to adjust the value, (Home) > Settings > All press Reset to reset the value.
Page 35
settings > Motion Styles To format the picture manually… Motion styles provides optimised motion setting • Shift – select on the arrows to shift the picture. You modes for different video content. can only shift the picture when it is zoomed in. •...
Page 36
press OK. The style is restored. Select On to automatically level out sudden volume differences. Typically when you are switching Customise Personal style channels. Select Night mode for a more 1 - Set the sound style to Personal mode. comfortable quiet listening experience. 2 - Press the colour key ...
Page 37
capabilities of the connected Home Theatre System. Channels • Stereo (uncompressed): If your audio playback devices have no multichannel sound processing, HbbTV Settings - Hybrid Broadcast Broadband TV select to only output stereo content to your audio playback devices. (Home) > Settings > All Settings > Channels •...
Page 38
property of their respective owners. USB Keyboard Settings (Home) > Settings > All settings > General settings > USB keyboard settings HDMI Ultra HD To install the USB keyboard, switch on the TV and (Home) > Settings > All settings > General connect the USB keyboard to one of settings >...
Page 39
Turn On/Off the Demo Me autostart. Set TV switch off timer (Home) > Settings > All settings > General settings > Eco settings > Switch off timer Manage demos Press the arrows (up) or (down) to adjust the ...
Page 40
language > Language > Primary Viewing Data subtitle, Secondary subtitle This takes you to the Viewing data settings where you Digital channels can offer several subtitle languages can enable or disable the collection of your viewing for a programme. You can set a preferred primary and data by Inscape Data, Inc.
Page 41
PIN code when you try to start an 18+ rated app. This lock is only valid for 18+ rated apps Universal access for blind or partially sighted from the Philips apps. people (Home) > Settings > All settings > Universal Set code access >...
If your router has WPS, you can directly connect to the router without scanning for networks. If you have To enjoy the full capabilities of your Philips Smart TV, devices in your wireless network that use the WEP your TV must be connected to the Internet.
(Home) > Settings > All settings > Wireless (Home) > Settings > All settings > Wireless and networks > Clear Internet Memory and networks > Static IP configuration With Clear Internet Memory you clear your Philips 1 - Select Static IP configuration and configure the...
Page 44
Philips App Gallery favourites, Internet bookmarks and history. Interactive MHEG applications can also save so-called 'cookies', on your TV. These files will also be cleared.
App gallery does not hold what you are looking for, try the World Wide Web and surf the Internet on TV. Smart TV Search With Search, you can search the App Gallery for 13.1 relevant Apps. Setup Smart TV Enter a keyword in the text field, select and press OK to start searching.
TV on Demand / Video on Demand TV on Demand (Home) > Apps > TV on Demand You can watch TV programmes you missed or watch your favourite programmes whenever it suits you best. Video on Demand (Home) > Apps > Video on Demand You can rent movies from an online rental video store.
> Ambilight > Ambilight style > Follow In this first step, you will prepare the TV to find colour the Philips Hue Bridge. The TV and the Philips Hue Bridge must use the same network. Select one of the preset colour styles.
Page 48
2 - Select Start now and press OK. The TV will 1 - Select a bulb to configure and press OK. The search for the Philips Hue Bridge. If the TV is not yet bulb you selected is flashing. connected to your network, the TV will start the 2 - Select Start and press OK.
Netflix If you have a Netflix menbership subscription, you can enjoy Netflix on this TV. Your TV must be connected to the Internet. To open Netflix, press to open the Netflix App. You can open Netflix immediately from a TV in standby.
Rakuten TV Watch the latest new releases on your Smart TV. The biggest blockbusters, award winning classics and TV series available instantly. Press the Rakuten TV key on your remote control or the app icon to open the Rakuten TV app. Your TV must be connected to the Internet to use the app.
Amazon Prime Video With an Amazon prime membership, you gain access to thousands of popular movies and TV show, including exclusive Prime Originals. Press the app icon to open the Amazon Prime Video app. Your TV must be connected to the Internet to use the app.
YouTube YouTube provides a platform to connect to the world. Watch and discover popular videos that uploaded by YouTube users around the world. Use the YouTube app to explore the latest topics on music, news, and more. Press the app icon to open the YouTube app. Your TV must be connected to the Internet to use the app.
Environmental 20.1 End of Use Disposal of your old product and batteries Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2012/19/EU.
• Image Codec : JPEG, GIF, PNG, BMP, HEIF, 360 21.5 photo Supported Input Resolution - Wi-Fi Certified Computer This TV supports Miracast certified devices. Performance may vary, depending on the capabilities • 640 x 480 - 60Hz of the mobile device and the software used. •...
Philips startup screen > User manual to find the information you are looking When the TV is in standby, a Philips startup screen is for. Select a keyword to go the most relevant page in displayed, then the TV returns to standby mode. This the User manual.
Press (Home) > Settings > Help > Check the TV. settings at the start of the installation. You can set the If the video clip stays black, call Philips. Wait until the TV to search for One, Two or 3/4 satellites.
Call the telephone number for your country. (Home) > Settings > All settings > General settings > Location Sound but no picture • Change to other video sources and then change Picture does not fit the screen / Wrong or unstable back to current source.
22.8 22.10 HDMI - UHD Wi-Fi and Internet HDMI Wi-Fi network not found or distorted • Note that HDCP (High-bandwidth Digital Content • Check if the firewalls in your network allow access Protection) support can delay the time taken for a TV to the TV's wireless connection.
The remote control may contain coin-type batteries from the power outlet immediately. which can easily be swallowed by small children. Contact Philips TV Consumer Care to have the TV Keep these batteries out of reach of children at all checked before use.
Humidity In rare occasions, depending on temperature and humidity, minor condensation can occur on the inside of the TV glass front (on some models). To prevent this, do not expose the TV to direct sunlight, heat or extreme humidity. If condensation occurs, it will disappear spontaneously while the TV is playing for a few hours.
TP Vision is the warrantor in relation to the apparatus, in general have the ability to emit and TV with which this booklet was packaged. Philips and receive electromagnetic signals. One of TP Vision’s the Philips Shield Emblem are registered trademarks leading business principles is to take all necessary of Koninklijke Philips N.V.
Copyrights 25.1 HDMI The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries. 25.4 DTS-HD (italics) DTS® offers decoding of DTS content for up to 5.1 discrete channels with support for low bit rate and streaming media.
P1003.2/ISO 9945.2 Shell and Tools standard. It offers functional improvements over sh for both Open Source programming and interactive use. In addition, most sh scripts can be run by Bash without modification. 26.1 Source: http://www.gnu.org/software/bash/ Open Source Software c-ares (1.10.0) This television contains open source software.
Page 66
The GNU Find Utilities are the basic directory Source: http://www.gnu.org/software/inetutils/ searching utilities of the GNU operating system. These programs are typically used in conjunction with iptables (1.4.15) other programs to provide modular and powerful For Cross connection. directory search and file locating capabilities to other Source: http://www.netfilter.org/projects/iptables/ commands.
Page 67
libusb. ain_Page This piece of software is made available under the terms and conditions of the libusb license, which can mtd-utils be found below. The aim of the system is to make it simple to provide Source: a driver for new hardware, by providing a generic http://libusb.wiki.sourceforge.net interface between the hardware drivers and the upper http://www.libusb.org/...
Page 68
procps (ps, top) (3.2.8) to run . procps is the package that has a bunch of small This piece of software is made available under the useful utilities that give information about processes terms and conditions of the u-Boot loader license, using the /proc filesystem.
Disclaimer regarding services and/or software offered by third parties Services and/or software offered by third parties may be changed, suspended, or terminated without prior notice. TP Vision does not bear any responsibility in these sorts of situations.
Page 70
Digital Out Levelling 36 Network Settings Menu 43 Digital Out Menu 36 Digital Out Offset 36 Dynamic Contrast 34 On-line User Manual 4 Dynamic surround 36 Parental Rating 41 End of Use 54 Pause TV 29 Energy Saving 38 Philips Support 4...
Page 71
Philips TV Remote App 14 Universal Access, Mixed Volume 41 Photos, Videos and Music 30 Universal Access, Speech 41 Picture Clean, Noise Reduction 34 Unlock Channel 23 Picture Contrast Menu 34 Update Software 6 Picture Contrast Mode 34 Update Software - Internet 6...